Skip to content
worldfires
CD · Democratic Republic of the Congo · –

Dilolo fire, July 2026 Dilolo

Out · last detection 25 Aug 2026, 11:38 UTC

The fire started on 30 July 2026 in Dilolo, Democratic Republic of the Congo, and satellites saw it burning for 26 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 9,896 hectares from heat detections, spread across a single municipality.

Number 177 in Democratic Republic of the Congo in 2026, of 515.

GWIS near-real-time perimeter, from the layer that changed in August 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Compare with…

Suggestions: Dilolo · 2026Dilolo · 2016

Burnt area
9,896ha
GWIS perimeter (Copernicus)
Duration
26days
30 Jul 2026 – 24 Aug 2026
Municipalities hit
1
territories
Started on
30 Jul
2026
Heat detections
233
in a single hotspot: 204 MW
Danger at start
46
Very high · FWI index
Average daily power
259MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 30 Jul24 Aug
25 Aug 2026

How it evolved, day by day

31 Jul 2026 · 121 MW · 14 1 Aug 2026 · 269 MW · 12 3 Aug 2026 · 19 MW · 4 4 Aug 2026 · 8 MW · 1 5 Aug 2026 · 229 MW · 13 6 Aug 2026 · 38 MW · 6 7 Aug 2026 · 28 MW · 6 9 Aug 2026 · 432 MW · 10 10 Aug 2026 · 1,342 MW · 45 11 Aug 2026 · 1,209 MW · 29 12 Aug 2026 · 45 MW · 7 14 Aug 2026 · 277 MW · 23 15 Aug 2026 · 977 MW · 20 16 Aug 2026 · 43 MW · 6 17 Aug 2026 · 144 MW · 13 19 Aug 2026 · 47 MW · 1 20 Aug 2026 · 5 MW · 2 21 Aug 2026 · 117 MW · 10 22 Aug 2026 · 38 MW · 7 24 Aug 2026 · 53 MW · 3 25 Aug 2026 · 1 MW · 1
31 Jul 10 Aug 19 Aug 25 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (23 passes) and with what wind. Watch the film

The weather it burned in

33°high
45km/h · peak gust
11%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

74% of the perimeter overlaps earlier fires recorded since 2016: 669 ha in 2016, 857 ha in 2017, 62 ha in 2018, 1,501 ha in 2019, 244 ha in 2020, 2,132 ha in 2021, 1,547 ha in 2022, 1,637 ha in 2023, 1,808 ha in 2024, 2,504 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 7,355 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 6.2% of the area of London (99 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Dilolo where it started
    9,973 ha reached on 31 Jul
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 25 % of the area in Democratic Republic of the Congo

Day High Min. humidity Peak gust Rain Danger (FWI)
30 Jul 30.6 °C 21 % 31 km/h 0.0 mm Very high 46
31 Jul 30.0 °C 22 % 31 km/h 0.0 mm Very high 46
1 Aug 29.3 °C 21 % 32 km/h 0.0 mm Very high 44
2 Aug 28.8 °C 18 % 27 km/h 0.0 mm Very high 41
3 Aug 28.9 °C 21 % 31 km/h 0.0 mm Very high 42
4 Aug 30.0 °C 14 % 32 km/h 0.0 mm Very high 47
5 Aug 29.5 °C 13 % 32 km/h 0.0 mm Extreme 53
6 Aug 30.0 °C 16 % 29 km/h 0.0 mm Very high 48
7 Aug 30.4 °C 20 % 28 km/h 0.0 mm Very high 48
8 Aug 30.3 °C 21 % 31 km/h 0.0 mm Very high 49
9 Aug 30.3 °C 30 % 27 km/h 0.0 mm Very high 40
10 Aug 31.7 °C 14 % 30 km/h 0.0 mm Very high 49
11 Aug 31.5 °C 18 % 31 km/h 0.0 mm Extreme 51
12 Aug 30.2 °C 25 % 30 km/h 0.0 mm Very high 46
13 Aug 30.7 °C 24 % 34 km/h 0.0 mm Very high 49
14 Aug 30.9 °C 23 % 37 km/h 0.0 mm Very high 49
15 Aug 29.5 °C 23 % 33 km/h 0.0 mm Very high 41
16 Aug 29.2 °C 21 % 32 km/h 0.0 mm Very high 39
17 Aug 30.1 °C 16 % 36 km/h 0.0 mm Very high 48
18 Aug 30.9 °C 11 % 37 km/h 0.0 mm Extreme 54
19 Aug 31.3 °C 12 % 38 km/h 0.0 mm Extreme 58
20 Aug 30.9 °C 14 % 39 km/h 0.0 mm Extreme 53
21 Aug 31.7 °C 17 % 30 km/h 0.0 mm Very high 50
22 Aug 32.2 °C 18 % 31 km/h 0.0 mm Extreme 51
23 Aug 32.5 °C 17 % 35 km/h 0.0 mm Extreme 56
24 Aug 32.6 °C 17 % 45 km/h 0.0 mm Extreme 62
25 Aug after 33.2 °C 20 % 39 km/h 0.0 mm Extreme 56
26 Aug after 31.8 °C 26 % 36 km/h 0.0 mm Extreme 51
27 Aug after 33.4 °C 21 % 41 km/h 0.0 mm Extreme 55
28 Aug after 32.6 °C 20 % 38 km/h 0.0 mm Extreme 55
29 Aug after 32.0 °C 21 % 36 km/h 0.0 mm Extreme 51
30 Aug after 32.4 °C 21 % 34 km/h 0.0 mm Extreme 52
31 Aug after 33.6 °C 17 % 36 km/h 0.0 mm Extreme 55
1 Sept after 34.6 °C 16 % 36 km/h 0.0 mm Extreme 58
2 Sept after 32.4 °C 21 % 35 km/h 0.0 mm Extreme 55
3 Sept after 34.2 °C 15 % 31 km/h 0.0 mm Extreme 52

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 23 Jul 2026
After · 31 Aug 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 21 August 2026 the air beside the fire reached 136 µg/m³ of PM2.5. That day averaged 89: 5.9 times the WHO daily guideline (15).

PM2.5 peak136 µg/m³
Days over the guideline25 days
PM10142 µg/m³
Optical depth1.69
3 Aug8 Aug13 Aug18 Aug23 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 233Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Democratic Republic of the Congo

Frequently asked questions

How long did the Dilolo fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 30 July 2026 to 24 August 2026 (26 days). The perimeter dates it from 6 August 2026 to 17 August 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,896 hectares (99.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Dilolo (9,973 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 32.6 °C, humidity dropped to 11 % and gusts hit 45 km/h. The fire danger index (FWI) reached 62, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Democratic Republic of the Congo (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 3 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 5 August 2026 → 30 July 2026.
  2. Last day with fire: 17 August 2026 → 24 August 2026.
  3. Start date: 6 August 2026 → 5 August 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 6 August 2026 to 17 August 2026. 233 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.