Skip to content
worldfires
BF · Burkina Faso · –

Diapaga fire, 22 November 2022 Diapaga

Out · last detection 24 Nov 2022, 13:02 UTC

The fire started on 22 November 2022 in Diapaga, Burkina Faso, and satellites saw it burning for 3 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,090 hectares from heat detections, spread across a single municipality.

It is the 186th largest in Tapoa since 2016 (of 212 with a page). Number 92 in Burkina Faso in 2022, of 109.

Burnt area
1,090ha
GWIS perimeter (Copernicus)
Duration
3days
22 Nov 2022 – 24 Nov 2022
Municipalities hit
1
communes
Started on
22 Nov
2022
Heat detections
18
in a single hotspot: 161 MW
Danger at start
73
Very extreme · FWI index
Average daily power
148MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 22 Nov24 Nov
24 Nov 2022

How it evolved, day by day

22 Nov 2022 · 262 MW · 7 23 Nov 2022 · 179 MW · 10 24 Nov 2022 · 3 MW · 1
22 Nov 23 Nov 24 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
40km/h · peak gust
11%lowest humidity

It had gone 39 days without rain (1 mm or more) when it started.

This area had burned before

65% of the perimeter overlaps earlier fires recorded since 2016: 173 ha in 2016, 702 ha in 2017. Part of it burned more than once, so the yearly figures add up to more than the 707 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 0.7% of the area of London (11 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Diapaga where it started
    1,097 ha reached on 22 Nov
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
22 Nov 35.5 °C 15 % 40 km/h 0.0 mm Very extreme 73
23 Nov 35.2 °C 11 % 37 km/h 0.0 mm Very extreme 72
24 Nov 34.9 °C 14 % 39 km/h 0.0 mm Very extreme 73
25 Nov after 34.8 °C 15 % 35 km/h 0.0 mm Very extreme 72
26 Nov after 35.3 °C 16 % 35 km/h 0.0 mm Extreme 66
27 Nov after 35.0 °C 14 % 29 km/h 0.0 mm Extreme 58
28 Nov after 35.1 °C 14 % 28 km/h 0.0 mm Extreme 54
29 Nov after 35.0 °C 12 % 31 km/h 0.0 mm Extreme 63
30 Nov after 34.7 °C 15 % 35 km/h 0.0 mm Extreme 59
1 Dec after 35.9 °C 15 % 28 km/h 0.0 mm Extreme 58
2 Dec after 36.2 °C 17 % 29 km/h 0.0 mm Extreme 60
3 Dec after 36.7 °C 19 % 29 km/h 0.0 mm Extreme 60
4 Dec after 37.5 °C 13 % 38 km/h 0.0 mm Very extreme 78

Its twins: fires that started in the same weather

It started with an FWI of 72.6, a minimum humidity of 15% and 39 days without rain. Fires in the area that started in weather like this since 2016: 20.

FWI at the start 72.6
Minimum humidity 15 %
Days without rain 39
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Diapaga fire, November 2020
1,703 ha 4 days FWI 74.4 Min. humidity 15 % 12 km away, in 2020

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

4 days
median duration
1,768 ha
median area
100 %
went past 1,000 ha
—
rain at the end (median; 0 of 20 had it)

It stayed below its twins: 1,090 ha against a median of 1,768 ha. It lasted 3 days, against 4 days.

In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
40km/h · max. gust

It was considered over on 24 Nov, and not even 1 mm fell in the following ten days: it went out without rain. None of its 20 twins had rain when they ended.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 15 Nov 2022
After · 1 Dec 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 25 November 2022 the air beside the fire reached 52 µg/m³ of PM2.5. That day averaged 39: 2.6 times the WHO daily guideline (15).

PM2.5 peak52 µg/m³
Days over the guideline7 days
PM10140 µg/m³
Optical depth0.35
20 Nov22 Nov24 Nov26 Nov
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 18Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Burkina Faso

Frequently asked questions

How long did the Diapaga fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 22 November 2022 to 24 November 2022 (3 days). The perimeter dates it from 22 November 2022 to 23 November 2022.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,090 hectares (10.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Diapaga (1,097 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 35.5 °C, humidity dropped to 11 % and gusts hit 40 km/h. The fire danger index (FWI) reached 73, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Burkina Faso (OCHA COD-AB). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 20. Their median duration was 4 days and their median area 1,768 ha; 100 % went past 1,000 ha. In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 23 November 2022 → 24 November 2022.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 22 November 2022 to 23 November 2022. 18 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from OCHA COD-AB (Institut Geographique Burkina (IGB)) (Creative Commons Attribution for Intergovernmental Organisations (CC BY-IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.