Skip to content
worldfires
AU · Australia · –

Derby-West Kimberley fire, 2 June 2017 Derby-West Kimberley

Out · last detection 15 Jun 2017, 05:41 UTC

The fire started on 2 June 2017 in Derby-West Kimberley, Australia, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,614 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
6,614ha
GWIS perimeter (Copernicus)
Duration
13days
2 Jun 2017 – 14 Jun 2017
Municipalities hit
1
local government areas
Started on
2 Jun
2017
Heat detections
202
in a single hotspot: 0 MW
Danger at start
51
Extreme · FWI index
Average daily power
61MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 2 Jun14 Jun
15 Jun 2017

How it evolved, day by day

2 Jun 2017 · 12 MW · 2 3 Jun 2017 · 1 MW · 1 4 Jun 2017 · 24 MW · 5 5 Jun 2017 · 53 MW · 14 6 Jun 2017 · 147 MW · 37 7 Jun 2017 · 24 MW · 4 8 Jun 2017 · 27 MW · 8 9 Jun 2017 · 150 MW · 29 10 Jun 2017 · 147 MW · 41 11 Jun 2017 · 194 MW · 45 12 Jun 2017 · 42 MW · 9 13 Jun 2017 · 5 MW · 3 14 Jun 2017 · 8 MW · 2 15 Jun 2017 · 18 MW · 2
2 Jun 5 Jun 8 Jun 11 Jun 14 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
45km/h · peak gust
21%lowest humidity

It had gone 32 days without rain (1 mm or more) when it started.

This area had burned before

10% of the perimeter overlaps earlier fires recorded since 2016: 703 ha in 2016. Part of it burned more than once, so the yearly figures add up to more than the 654 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 4.2% of the area of London (66 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Derby-West Kimberley where it started
    6,606 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
2 Jun 30.9 °C 28 % 40 km/h 0.0 mm Extreme 51
3 Jun 31.3 °C 29 % 35 km/h 0.0 mm Very high 48
4 Jun 31.7 °C 26 % 32 km/h 0.0 mm Very high 46
5 Jun 32.0 °C 26 % 32 km/h 0.0 mm Very high 45
6 Jun 30.9 °C 26 % 38 km/h 0.0 mm Extreme 53
7 Jun 29.3 °C 23 % 43 km/h 0.0 mm Extreme 54
8 Jun 28.7 °C 22 % 38 km/h 0.0 mm Extreme 53
9 Jun 28.5 °C 22 % 42 km/h 0.0 mm Extreme 59
10 Jun 28.5 °C 22 % 41 km/h 0.0 mm Extreme 53
11 Jun 28.5 °C 22 % 45 km/h 0.0 mm Extreme 56
12 Jun 29.0 °C 23 % 38 km/h 0.0 mm Very high 47
13 Jun 29.4 °C 21 % 32 km/h 0.0 mm Very high 42
14 Jun 29.4 °C 21 % 29 km/h 0.0 mm Very high 45
15 Jun after 29.9 °C 21 % 31 km/h 0.0 mm Very high 48
16 Jun after 30.3 °C 21 % 29 km/h 0.0 mm Very high 49
17 Jun after 30.3 °C 23 % 31 km/h 0.0 mm Extreme 50
18 Jun after 31.4 °C 27 % 36 km/h 0.0 mm Extreme 56
19 Jun after 30.9 °C 29 % 32 km/h 0.0 mm Very high 45
20 Jun after 31.8 °C 26 % 33 km/h 0.0 mm Very high 47
21 Jun after 32.3 °C 30 % 24 km/h 0.0 mm Very high 41
22 Jun after 31.9 °C 28 % 21 km/h 0.0 mm Very high 40
23 Jun after 31.7 °C 31 % 18 km/h 0.0 mm High 37
24 Jun after 31.8 °C 34 % 18 km/h 0.0 mm High 34

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 26 May 2017
After · 21 Jun 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 0Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Derby-West Kimberley fire last?
GWIS (Copernicus) dates it between 2 June 2017 and 14 June 2017: 13 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,614 hectares (66.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Derby-West Kimberley (6,606 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 32.0 °C, humidity dropped to 21 % and gusts hit 45 km/h. The fire danger index (FWI) reached 59, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 4 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 15 June 2017 → 14 June 2017.
  2. Start date: 31 May 2017 → 2 June 2017.
  3. Last day with fire: 14 June 2017 → 15 June 2017.
  4. Start date: 2 June 2017 → 31 May 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.