Skip to content
worldfires
AU · Australia · –

Derby-West Kimberley fire, 23 July 2016 Derby-West Kimberley

Out · last detection 3 Aug 2016, 06:07 UTC

The fire started on 23 July 2016 in Derby-West Kimberley, Australia, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 16,768 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
16,768ha
GWIS perimeter (Copernicus)
Duration
12days
23 Jul 2016 – 3 Aug 2016
Municipalities hit
1
local government areas
Started on
23 Jul
2016
Heat detections
556
in a single hotspot: 84 MW
Danger at start
50
Very high · FWI index
Average daily power
237MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 23 Jul3 Aug
3 Aug 2016

How it evolved, day by day

23 Jul 2016 · 20 MW · 11 24 Jul 2016 · 623 MW · 85 25 Jul 2016 · 541 MW · 102 26 Jul 2016 · 222 MW · 49 27 Jul 2016 · 177 MW · 54 28 Jul 2016 · 99 MW · 45 29 Jul 2016 · 199 MW · 55 30 Jul 2016 · 134 MW · 41 31 Jul 2016 · 220 MW · 46 1 Aug 2016 · 320 MW · 48 2 Aug 2016 · 285 MW · 18 3 Aug 2016 · 7 MW · 2
24 Jul 29 Jul 1 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
52km/h · peak gust
6%lowest humidity

It had gone 9 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 11% of the area of London (168 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Derby-West Kimberley where it started
    16,841 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Very dry air: 28 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
23 Jul 32.4 °C 12 % 26 km/h 0.0 mm Very high 50
24 Jul 32.6 °C 16 % 35 km/h 0.0 mm Extreme 56
25 Jul 32.7 °C 16 % 30 km/h 0.0 mm Extreme 55
26 Jul 32.9 °C 14 % 25 km/h 0.0 mm Very high 48
27 Jul 30.3 °C 16 % 52 km/h 0.0 mm Very extreme 86
28 Jul 28.8 °C 11 % 46 km/h 0.0 mm Very extreme 72
29 Jul 29.4 °C 15 % 40 km/h 0.0 mm Extreme 68
30 Jul 29.9 °C 7 % 41 km/h 0.0 mm Very extreme 75
31 Jul 30.2 °C 7 % 28 km/h 0.0 mm Extreme 59
1 Aug 31.2 °C 6 % 29 km/h 0.0 mm Extreme 62
2 Aug 28.9 °C 13 % 39 km/h 0.0 mm Extreme 69
3 Aug 28.6 °C 11 % 42 km/h 0.0 mm Extreme 68
4 Aug after 26.9 °C 10 % 42 km/h 0.0 mm Extreme 68
5 Aug after 27.1 °C 8 % 45 km/h 0.0 mm Very extreme 72
6 Aug after 29.2 °C 10 % 32 km/h 0.0 mm Extreme 58
7 Aug after 31.1 °C 9 % 27 km/h 0.0 mm Extreme 63
8 Aug after 32.1 °C 9 % 33 km/h 0.0 mm Extreme 64
9 Aug after 32.0 °C 13 % 23 km/h 0.0 mm Extreme 56
10 Aug after 32.9 °C 16 % 20 km/h 0.0 mm Very high 47
11 Aug after 32.9 °C 15 % 38 km/h 0.0 mm Extreme 66
12 Aug after 32.7 °C 17 % 28 km/h 0.0 mm Extreme 52
13 Aug after 33.0 °C 18 % 27 km/h 0.0 mm Extreme 58

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 16 Jul 2016
After · 10 Aug 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 556Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Derby-West Kimberley fire last?
GWIS (Copernicus) dates it between 23 July 2016 and 3 August 2016: 12 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 16,768 hectares (167.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Derby-West Kimberley (16,841 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 32.9 °C, humidity dropped to 6 % and gusts hit 52 km/h. The fire danger index (FWI) reached 86, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 556 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.