Skip to content
worldfires
AU · Australia · –

Derby-West Kimberley fire, 10 April 2016 Derby-West Kimberley

Out · last detection 18 Apr 2016, 04:33 UTC

The fire started on 10 April 2016 in Derby-West Kimberley, Australia, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 7,847 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
7,847ha
GWIS perimeter (Copernicus)
Duration
9days
10 Apr 2016 – 18 Apr 2016
Municipalities hit
1
local government areas
Started on
10 Apr
2016
Heat detections
184
in a single hotspot: 207 MW
Danger at start
28
High · FWI index
Average daily power
357MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 10 Apr18 Apr
18 Apr 2016

How it evolved, day by day

12 Apr 2016 · 23 MW · 8 13 Apr 2016 · 445 MW · 57 14 Apr 2016 · 1,149 MW · 30 15 Apr 2016 · 365 MW · 24 16 Apr 2016 · 277 MW · 36 17 Apr 2016 · 232 MW · 28 18 Apr 2016 · 4 MW · 1
12 Apr 14 Apr 16 Apr 18 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
40km/h · peak gust
25%lowest humidity

It had gone one day without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 5% of the area of London (78 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Derby-West Kimberley where it started
    7,834 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
10 Apr 35.3 °C 30 % 39 km/h 0.0 mm High 28
11 Apr 35.2 °C 27 % 40 km/h 0.0 mm High 33
12 Apr 34.5 °C 25 % 30 km/h 0.0 mm High 26
13 Apr 33.3 °C 27 % 22 km/h 0.0 mm High 23
14 Apr 33.5 °C 29 % 28 km/h 0.0 mm High 28
15 Apr 32.7 °C 34 % 21 km/h 0.0 mm High 23
16 Apr 34.4 °C 27 % 18 km/h 0.0 mm High 22
17 Apr 34.4 °C 30 % 18 km/h 0.0 mm High 22
18 Apr 33.4 °C 37 % 17 km/h 0.0 mm Moderate 20
19 Apr after 32.7 °C 41 % 22 km/h 0.1 mm Moderate 21
20 Apr after 34.1 °C 39 % 20 km/h 0.0 mm Moderate 21
21 Apr after 33.8 °C 34 % 21 km/h 0.0 mm High 23
22 Apr after 35.1 °C 26 % 32 km/h 0.0 mm High 32
23 Apr after 35.5 °C 19 % 47 km/h 0.0 mm Extreme 58
24 Apr after 34.6 °C 19 % 44 km/h 0.0 mm Extreme 55
25 Apr after 33.6 °C 19 % 33 km/h 0.0 mm Very high 43
26 Apr after 33.1 °C 24 % 20 km/h 0.0 mm High 36
27 Apr after 33.2 °C 27 % 22 km/h 0.0 mm High 31
28 Apr after 33.2 °C 31 % 21 km/h 0.0 mm High 31

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 3 Apr 2016
After · 25 Apr 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 184Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Derby-West Kimberley fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 10 April 2016 to 18 April 2016 (9 days). The perimeter dates it from 12 April 2016 to 18 April 2016.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 7,847 hectares (78.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Derby-West Kimberley (7,834 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 35.3 °C, humidity dropped to 25 % and gusts hit 40 km/h. The fire danger index (FWI) reached 33, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 12 April 2016 → 10 April 2016.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 12 April 2016 to 18 April 2016. 184 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.