Skip to content
worldfires
PK · Pakistan · –

Depalpur fire, 15 October 2026 Depalpur

Out · last detection 6 Nov 2026, 08:22 UTC

The fire started on 15 October 2026 in Depalpur, Pakistan, and satellites saw it burning for 23 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,524 hectares from heat detections, spread across a single municipality.

Number 15 in Pakistan in 2026, of 32.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

The power measured by the satellite is low (18.8 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Compare with…
Burnt area
1,524ha
GWIS perimeter (Copernicus)
Duration
23days
15 Oct 2026 – 6 Nov 2026
Municipalities hit
1
subdistricts
Started on
15 Oct
2026
Heat detections
19
in a single hotspot: 19 MW
Danger at start
7
Low · FWI index
Average daily power
11MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Oct6 Nov
6 Nov 2026

How it evolved, day by day

15 Oct 2026 · 0 MW · 0 16 Oct 2026 · 0 MW · 0 17 Oct 2026 · 0 MW · 0 18 Oct 2026 · 0 MW · 0 19 Oct 2026 · 5 MW · 2 22 Oct 2026 · 13 MW · 3 23 Oct 2026 · 0 MW · 0 24 Oct 2026 · 17 MW · 1 25 Oct 2026 · 36 MW · 4 26 Oct 2026 · 0 MW · 0 27 Oct 2026 · 0 MW · 0 28 Oct 2026 · 6 MW · 2 29 Oct 2026 · 6 MW · 2 30 Oct 2026 · 0 MW · 0 31 Oct 2026 · 3 MW · 1 2 Nov 2026 · 0 MW · 0 3 Nov 2026 · 0 MW · 0 4 Nov 2026 · 8 MW · 3 5 Nov 2026 · 3 MW · 1 6 Nov 2026 · 0 MW · 0
15 Oct 19 Oct 25 Oct 29 Oct 3 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
49km/h · peak gust
31%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started.

This area had burned before

8% of the perimeter overlaps earlier fires recorded since 2016: 89 ha in 2021, 27 ha in 2025.

How big is it?

10 km
It burned the equivalent of 1% of the area of London (15 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Depalpur where it started
    1,527 ha reached on 15 Oct
    0.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Oct 29.8 °C 52 % 33 km/h 3.6 mm Low 7
16 Oct 29.4 °C 45 % 20 km/h 0.0 mm Low 9
17 Oct 29.9 °C 42 % 19 km/h 0.0 mm Moderate 14
18 Oct 30.3 °C 41 % 15 km/h 0.0 mm Moderate 15
19 Oct 30.7 °C 42 % 18 km/h 0.0 mm Moderate 17
20 Oct 30.9 °C 45 % 17 km/h 0.0 mm Moderate 18
21 Oct 31.3 °C 41 % 16 km/h 0.0 mm Moderate 17
22 Oct 31.6 °C 43 % 21 km/h 0.2 mm Moderate 18
23 Oct 30.2 °C 37 % 36 km/h 8.0 mm Very low 5
24 Oct 30.0 °C 42 % 49 km/h 1.1 mm Low 11
25 Oct 28.3 °C 39 % 23 km/h 0.0 mm Moderate 18
26 Oct 29.1 °C 39 % 17 km/h 0.0 mm Moderate 16
27 Oct 29.2 °C 44 % 16 km/h 0.0 mm Moderate 16
28 Oct 29.2 °C 40 % 19 km/h 0.0 mm Moderate 18
29 Oct 29.3 °C 31 % 18 km/h 0.0 mm High 22
30 Oct 27.3 °C 52 % 23 km/h 0.0 mm Moderate 18
31 Oct 29.0 °C 45 % 15 km/h 0.0 mm Moderate 18
1 Nov 28.5 °C 43 % 14 km/h 0.0 mm Moderate 17
2 Nov 29.5 °C 42 % 17 km/h 0.0 mm Moderate 18
3 Nov 29.3 °C 43 % 18 km/h 0.0 mm Moderate 19
4 Nov 29.2 °C 46 % 16 km/h 0.0 mm Moderate 19
5 Nov 29.2 °C 45 % 18 km/h 0.0 mm Moderate 20
6 Nov 29.2 °C 44 % 18 km/h 0.0 mm Moderate 21
7 Nov after 29.3 °C 45 % 21 km/h 0.0 mm High 23
8 Nov after 29.9 °C 41 % 19 km/h 0.0 mm High 22
9 Nov after 29.3 °C 41 % 19 km/h 0.0 mm High 23
10 Nov after 28.6 °C 43 % 14 km/h 0.0 mm Moderate 19
11 Nov after 29.2 °C 45 % 15 km/h 0.0 mm Moderate 19
12 Nov after 30.2 °C 39 % 18 km/h 0.0 mm High 23
13 Nov after 29.4 °C 41 % 26 km/h 0.0 mm High 28
14 Nov after 27.4 °C 51 % 16 km/h 0.4 mm Moderate 21
15 Nov after 26.8 °C 44 % 19 km/h 0.0 mm Moderate 21
16 Nov after 26.4 °C 35 % 22 km/h 0.0 mm High 26

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Oct 2026
After · 13 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 15 October 2026 the air beside the fire reached 153 µg/m³ of PM2.5. That day averaged 91: 6.1 times the WHO daily guideline (15).

PM2.5 peak153 µg/m³
Days over the guideline14 days
PM10589 µg/m³
Optical depth0.93
13 Oct16 Oct19 Oct22 Oct25 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 19Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Pakistan

Frequently asked questions

How long did the Depalpur fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 15 October 2026 to 6 November 2026 (23 days). The perimeter dates it from 19 October 2026 to 31 October 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,524 hectares (15.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Depalpur (1,527 ha, 0.6 %).
Is the Depalpur fire still active?
No fire detections since 6 Nov 2026, 08:22 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 31.6 °C, humidity dropped to 31 % and gusts hit 49 km/h. The fire danger index (FWI) reached 22, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Pakistan (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 1122 · 16 · Emergency number and official warnings

Satellite cross-check

History of this page · 4 Changes in area, dates, name, official record or merged pages, compared every night since 27 October 2026.
  1. Last day with fire: 27 October 2026 → 6 November 2026.
  2. Area: 1,460 → 1,524 ha.
  3. Area: 1,404 → 1,460 ha.
  4. Page published (1,404 ha).

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 1122 · 16.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 19 October 2026 to 31 October 2026. 19 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.