Skip to content
worldfires
MX · Mexico · –

Del Nayar fire, 28 April 2024 Del Nayar, La Yesca

Out · last detection 16 May 2024, 19:44 UTC

The fire started on 28 April 2024 in Del Nayar, Mexico, and satellites saw it burning for 19 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 13,405 hectares from heat detections, spread across 2 municipalities.

It is the 2th largest in Nayarit since 2016 (of 171 with a page). Number 7 in Mexico in 2024, of 289.

Burnt area
13,405ha
GWIS perimeter (Copernicus)
Duration
19days
28 Apr 2024 – 16 May 2024
Municipalities hit
2
municipalities
Started on
28 Apr
2024
Heat detections
678
in a single hotspot: 450 MW
Danger at start
51
Extreme · FWI index
Average daily power
267MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 28 Apr16 May
16 May 2024

How it evolved, day by day

28 Apr 2024 · 60 MW · 5 29 Apr 2024 · 6 MW · 6 30 Apr 2024 · 9 MW · 5 1 May 2024 · 326 MW · 28 2 May 2024 · 309 MW · 63 3 May 2024 · 381 MW · 54 4 May 2024 · 434 MW · 80 5 May 2024 · 148 MW · 51 6 May 2024 · 4 MW · 3 7 May 2024 · 87 MW · 66 8 May 2024 · 676 MW · 69 9 May 2024 · 379 MW · 39 10 May 2024 · 584 MW · 82 11 May 2024 · 95 MW · 32 12 May 2024 · 29 MW · 8 13 May 2024 · 990 MW · 12 14 May 2024 · 349 MW · 40 15 May 2024 · 168 MW · 17 16 May 2024 · 45 MW · 18
28 Apr 2 May 6 May 10 May 13 May

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
50km/h · peak gust
19%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

57% of the perimeter overlaps earlier fires recorded since 2016: 628 ha in 2016, 6,162 ha in 2018, 2,470 ha in 2021, 1,469 ha in 2022. Part of it burned more than once, so the yearly figures add up to more than the 7,574 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 8.5% of the area of London (134 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Del Nayar where it started
    7,508 ha reached on 28 Apr
    1.4 %
  2. 6,118 ha reached on 1 May
    1.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area1.7 ha
Residents≈ 100

Inside the perimeter there were about 1.7 hectares of built-up land and about 100 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

Official record

Several official records match this area

According to CONAFOR, 2 fires started inside this perimeter on these dates, totalling 10,278 ha (the satellite measured 13,405 ha). The two figures differ a lot, so these may not be exactly the same fire: take them as nearby records.

CONAFOR records each fire that started at a different time or place separately; the satellite sees a single burned area, so this page groups them together. The numbers on the map show where each one started.

When each one burned

1 8,254 ha 2 2,025 ha
29 Apr18 May
cause unknown or not published negligence
  1. 1 Del Nayar El Saucito 29 April 2024 8,254 ha · extinguished on 19 May 2024 · cause: unknown
  2. 2 La Yesca El Desengaño 1 May 2024 2,025 ha · extinguished on 5 May 2024 · cause: negligence

Total according to CONAFOR: 10,278 ha, 77 % of the 13,405 ha in the satellite perimeter.

CONAFOR (Comisión Nacional Forestal), estadística de incendios forestales en datos.gob.mx (CC BY 4.0). This is the agency’s consolidated statistic: it measures the area in its own way, which is why it can differ from the satellite.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 19 % of the area in Mexico 60 days without rain: 25 % of the area in Mexico

Day High Min. humidity Peak gust Rain Danger (FWI)
28 Apr 30.3 °C 19 % 46 km/h 0.0 mm Extreme 51
29 Apr 30.7 °C 22 % 48 km/h 0.0 mm Very high 48
30 Apr 31.6 °C 20 % 48 km/h 0.0 mm Very high 49
1 May 29.8 °C 25 % 42 km/h 0.0 mm Very high 47
2 May 31.2 °C 23 % 43 km/h 0.0 mm Very high 45
3 May 32.2 °C 25 % 44 km/h 0.0 mm Very high 49
4 May 31.2 °C 30 % 39 km/h 0.0 mm Very high 47
5 May 33.2 °C 25 % 45 km/h 0.0 mm Very high 46
6 May 31.0 °C 26 % 38 km/h 0.0 mm Very high 45
7 May 30.8 °C 24 % 38 km/h 0.0 mm Very high 44
8 May 34.3 °C 24 % 47 km/h 0.0 mm Very high 47
9 May 34.6 °C 25 % 40 km/h 0.0 mm Very high 46
10 May 34.7 °C 26 % 42 km/h 0.0 mm Very high 47
11 May 32.0 °C 37 % 42 km/h 0.0 mm Very high 42
12 May 30.7 °C 31 % 50 km/h 0.0 mm Very high 43
13 May 30.9 °C 28 % 38 km/h 0.0 mm Very high 41
14 May 31.2 °C 25 % 43 km/h 0.0 mm Very high 42
15 May 31.7 °C 26 % 45 km/h 0.0 mm Very high 45
16 May 31.6 °C 25 % 46 km/h 0.0 mm Very high 44
17 May after 31.4 °C 29 % 39 km/h 0.0 mm Very high 44
18 May after 32.2 °C 30 % 40 km/h 0.0 mm Very high 44
19 May after 33.8 °C 27 % 42 km/h 0.0 mm Very high 44
20 May after 33.0 °C 25 % 41 km/h 0.0 mm Very high 45
21 May after 33.3 °C 26 % 43 km/h 0.0 mm Very high 45
22 May after 31.7 °C 25 % 41 km/h 0.0 mm Very high 46
23 May after 33.5 °C 24 % 42 km/h 0.0 mm Very high 47
24 May after 33.9 °C 29 % 42 km/h 0.0 mm Very high 47
25 May after 34.3 °C 29 % 41 km/h 0.0 mm Very high 45
26 May after 33.0 °C 31 % 42 km/h 0.0 mm Very high 46

Its twins: fires that started in the same weather

It started with an FWI of 50.8, a minimum humidity of 19% and more than two months without rain. Fires in the area that started in weather like this since 2016: 32.

FWI at the start 50.8
Minimum humidity 19 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

La Yesca fire, May 2025
4,487 ha 11 days FWI 52.0 Min. humidity 19 % 36 km away, in 2025

First rain (1 mm or more) after it ended: 3.6 mm on 30 May.

What happened to them

10 days
median duration
2,533 ha
median area
100 %
went past 1,000 ha
1.8 mm
rain at the end (median; 20 of 32 had it)

It was 5.3 times larger than the median of its twins and lasted 19 days, against 10 days.

None of its 32 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 12 of 32, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
50km/h · max. gust

It was considered over on 16 May, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 20 of 32, with a median of 1.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 21 Apr 2024
After · 23 May 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 2 May 2024 the air beside the fire reached 170 µg/m³ of PM2.5. That day averaged 81: 5.4 times the WHO daily guideline (15).

PM2.5 peak170 µg/m³
Days over the guideline18 days
PM10244 µg/m³
Optical depth0.83
26 Apr1 May6 May11 May16 May
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 678Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mexico

Frequently asked questions

How long did the Del Nayar fire last?
GWIS (Copernicus) dates it between 28 April 2024 and 16 May 2024: 19 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 13,405 hectares (134.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Del Nayar (7,508 ha, 1.4 %); La Yesca (6,118 ha, 1.4 %).
What was the weather like?
During the fire the temperature reached 34.7 °C, humidity dropped to 19 % and gusts hit 50 km/h. The fire danger index (FWI) reached 51, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mexico (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 32. Their median duration was 10 days and their median area 2,533 ha; 100 % went past 1,000 ha. None of its 32 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 12 of 32, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 678 Suomi-NPP VIIRS detections on those dates.
  • Compared with CONAFOR: 10,278 official ha against 13,405 ha of perimeter; similar, but with reservations.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.