Skip to content
worldfires
IR · Iran · –

Darreh Shahr County fire, July 2017 Darreh Shahr County, Abdanan County

Out · last detection

The fire started on in Darreh Shahr County, Iran, and satellites saw it burning for 5 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,790 hectares from heat detections, spread across 2 municipalities.

It is number 3 by size of the 18 fires with a page that started in Ilam since 2016. Number 2 in Iran in 2017, of 16.

Burnt area
2,790ha
GWIS perimeter (Copernicus)
Duration
5days
16 Jul 2017 – 20 Jul 2017
Municipalities hit
2
counties
Started on
16 Jul
2017
Heat detections
86
in a single hotspot: 78 MW
Danger at start
72
Very extreme · FWI index
Average daily power
116MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 16 Jul20 Jul
20 Jul 2017

How it evolved, day by day

16 Jul 2017 · 196 MW · 27 17 Jul 2017 · 30 MW · 5 18 Jul 2017 · 206 MW · 23 19 Jul 2017 · 98 MW · 18 20 Jul 2017 · 50 MW · 13
16 Jul 17 Jul 18 Jul 19 Jul 20 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

41°high
35km/h · peak gust
6%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

41% of the perimeter overlaps earlier fires recorded since 2016: 1,142 ha in 2016.

How big is it?

10 km
It burned the equivalent of 1.8% of the area of London (28 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Darreh Shahr County where it started
    1,728 ha reached on 16 Jul
    2.0 %
  2. 1,065 ha reached on 18 Jul
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 91 % of the area in Iran Very dry air: 79 % of the area in Iran 60 days without rain: 27 % of the area in Iran

Day High Min. humidity Peak gust Rain Danger (FWI)
16 Jul 38.6 °C 7 % 35 km/h 0.0 mm Very extreme 72
17 Jul 39.7 °C 6 % 30 km/h 0.0 mm Very extreme 71
18 Jul 40.6 °C 6 % 24 km/h 0.0 mm Extreme 61
19 Jul 39.2 °C 7 % 30 km/h 0.0 mm Extreme 58
20 Jul 38.4 °C 10 % 32 km/h 0.0 mm Very extreme 71
21 Jul after 39.6 °C 10 % 38 km/h 0.0 mm Extreme 64
22 Jul after 40.7 °C 5 % 26 km/h 0.0 mm Extreme 58
23 Jul after 40.7 °C 5 % 29 km/h 0.0 mm Extreme 61
24 Jul after 40.4 °C 6 % 35 km/h 0.0 mm Extreme 66
25 Jul after 38.9 °C 7 % 46 km/h 0.0 mm Very extreme 88
26 Jul after 38.6 °C 5 % 37 km/h 0.0 mm Very extreme 77
27 Jul after 39.2 °C 6 % 28 km/h 0.0 mm Extreme 67
28 Jul after 39.9 °C 7 % 27 km/h 0.0 mm Extreme 66
29 Jul after 40.0 °C 8 % 31 km/h 0.0 mm Extreme 63
30 Jul after 40.2 °C 8 % 42 km/h 0.0 mm Very extreme 70

Its twins: fires that started in the same weather

It started with an FWI of 71.8, a minimum humidity of 7% and more than two months without rain. Fires in the area that started in weather like this since 2016: 17.

FWI at the start 71.8
Minimum humidity 7 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Pol-e-Dokhtar fire, September 2016
1,137 ha 4 days FWI 71.5 Min. humidity 8 % 22 km away, in 2016

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

4 days
median duration
1,488 ha
median area
100 %
went past 1,000 ha
—
rain at the end (median; 0 of 17 had it)

It was 1.9 times larger than the median of its twins and lasted 5 days, against 4 days.

None of its 17 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
35km/h · max. gust

It was considered over on 20 Jul, and not even 1 mm fell in the following ten days: it went out without rain. None of its 17 twins had rain when they ended.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 9 Jul 2017
After · 27 Jul 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 86Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Iran

Frequently asked questions

How long did the Darreh Shahr County fire last?
GWIS (Copernicus) dates it between 16 July 2017 and 20 July 2017: 5 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,790 hectares (27.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Darreh Shahr County (1,728 ha, 2.0 %); Abdanan County (1,065 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 40.6 °C, humidity dropped to 6 % and gusts hit 35 km/h. The fire danger index (FWI) reached 72, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Iran (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 17. Their median duration was 4 days and their median area 1,488 ha; 100 % went past 1,000 ha. None of its 17 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In none of them did 1 mm fall in the ten days after the end: they all went out without rain.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 125 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 125.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 86 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.