Skip to content
worldfires
ME · Montenegro · –

Danilovgrad Municipality fire, 5 August 2017 Danilovgrad Municipality

Out · last detection 8 Aug 2017, 01:07 UTC

The fire started on 5 August 2017 in Danilovgrad Municipality, Montenegro, and satellites saw it burning for 6 days. Copernicus mapped a burnt perimeter of 139 hectares from satellite imagery, spread across a single municipality.

Number 66 in Montenegro in 2017, of 75.

The power measured by the satellite is low (11.6 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
139ha
Copernicus perimeter
Duration
6days
5 Aug 2017 – 10 Aug 2017
Municipalities hit
1
municipalities
Started on
5 Aug
2017
Heat detections
15
in a single hotspot: 12 MW
Danger at start
7
Low · FWI index
Average daily power
16MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 5 Aug10 Aug
8 Aug 2017

How it evolved, day by day

5 Aug 2017 · 21 MW · 3 6 Aug 2017 · 5 MW · 2 7 Aug 2017 · 36 MW · 9 8 Aug 2017 · 2 MW · 1
5 Aug 6 Aug 7 Aug 8 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
28km/h · peak gust
27%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 2.6 mm on 12 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

What happened to each town

  1. Danilovgrad Municipality where it started
    139 ha reached on 5 Aug
    0.3 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Broadleaved forest86 %
  • Scrub and transitional woodland14 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
5 Aug 32.4 °C 46 % 20 km/h 1.3 mm Low 7
6 Aug 32.8 °C 39 % 20 km/h 1.0 mm Low 10
7 Aug 30.7 °C 42 % 24 km/h 0.3 mm Moderate 12
8 Aug 31.0 °C 43 % 22 km/h 0.0 mm Moderate 13
9 Aug 33.1 °C 27 % 28 km/h 0.0 mm Moderate 18
10 Aug 33.2 °C 36 % 26 km/h 2.1 mm Low 9
11 Aug after 31.1 °C 42 % 31 km/h 0.9 mm Moderate 11
12 Aug after 25.9 °C 42 % 38 km/h 2.6 mm Very low 4

Its twins: fires that started in the same weather

It started with an FWI of 6.7, a minimum humidity of 46% and 1 day without rain. Fires in the area that started in weather like this since 2016: 31.

FWI at the start 6.7
Minimum humidity 46 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Bileća fire, August 2025
292 ha 1 day FWI 7.6 Min. humidity 46 % 64 km away, in 2025

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

1 day
median duration
159 ha
median area
6 %
went past 1,000 ha
6.2 mm
rain at the end (median; 28 of 31 had it)

It burned an area similar to its twins (139 ha against a median of 159 ha) and lasted 6 days, against 1 day.

In 3 of 31, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.6 mmfirst rain
12 Aug2 days after it ended
28km/h · max. gust

It was considered over on 10 Aug, and on 12 Aug 2.6 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 28 of 31, with a median of 6.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 29 Jul 2017
After · 17 Aug 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 15Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Montenegro

Frequently asked questions

How long did the Danilovgrad Municipality fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 5 August 2017 to 10 August 2017 (6 days). The perimeter dates it from 7 August 2017 to 9 August 2017.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 139 hectares (1.4 km²). Official national figures may differ.
Which municipalities burned?
The fire only entered Danilovgrad Municipality (139 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 33.2 °C, humidity dropped to 27 % and gusts hit 28 km/h. The fire danger index (FWI) reached 18, class Moderate.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Montenegro (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 31. Their median duration was 1 day and their median area 159 ha; 6 % went past 1,000 ha. In 3 of 31, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · 123 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 9 August 2017 → 10 August 2017.
  2. Start date: 7 August 2017 → 5 August 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112 · 123.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 7 August 2017 to 9 August 2017. 15 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM1 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.