Dan Sai fire, 9 February 2020 ด่านซ้าย · Dan Sai
The fire started on 9 February 2020 in Dan Sai, Thailand, and satellites saw it burning for 5 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,577 hectares from heat detections, spread across a single municipality.
It is the 57th largest in Loei Province since 2016 (of 113 with a page). Number 224 in Thailand in 2020, of 457.
The power measured by the satellite is low (29.0 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.
Compare with…
- Burnt area
- 1,577ha
- GWIS perimeter (Copernicus)
- Duration
- 5days
- 9 Feb 2020 – 13 Feb 2020
- Municipalities hit
- 1
- districts
- Started on
- 9 Feb
- 2020
- Heat detections
- 57
- in a single hotspot: 29 MW
- Danger at start
- 23
- High · FWI index
- Average daily power
- 84MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone more than two months without rain (1 mm or more) when it started.
This area had burned before
99% of the perimeter overlaps earlier fires recorded since 2016: 1,262 ha in 2016, 1,009 ha in 2017, 1,370 ha in 2018, 1,438 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 1,560 ha that had burned before.
- 1,438 ha Dan Sai fire, March 2019 4,640 ha in total; the hectares shown are those it shares with this fire
- 1,294 ha Dan Sai fire, March 2018 2,046 ha in total; the hectares shown are those it shares with this fire
- 1,198 ha Dan Sai fire, March 2016 6,404 ha in total; the hectares shown are those it shares with this fire
- 76 ha Dan Sai fire, March 2018 1,102 ha in total; the hectares shown are those it shares with this fire
- 27 ha Dan Sai fire, March 2017 1,684 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Bangkok boundary: geoBoundaries · OpenStreetMap, Wambacher · © OpenStreetMap contributors (ODbL 1.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
1,585 ha1.2 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2020Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 9 Feb | 29.6 °C | 43 % | 37 km/h | 0.0 mm | High 23 |
| 10 Feb | 29.4 °C | 42 % | 23 km/h | 0.0 mm | Moderate 20 |
| 11 Feb | 32.5 °C | 36 % | 20 km/h | 0.0 mm | High 22 |
| 12 Feb | 31.4 °C | 49 % | 37 km/h | 0.0 mm | High 25 |
| 13 Feb | 32.3 °C | 40 % | 37 km/h | 0.0 mm | High 25 |
| 14 Feb after | 31.2 °C | 42 % | 46 km/h | 0.0 mm | High 28 |
| 15 Feb after | 32.4 °C | 29 % | 32 km/h | 0.0 mm | High 28 |
| 16 Feb after | 33.9 °C | 27 % | 23 km/h | 0.0 mm | High 29 |
| 17 Feb after | 29.8 °C | 47 % | 31 km/h | 0.0 mm | High 24 |
| 18 Feb after | 27.7 °C | 47 % | 29 km/h | 0.0 mm | High 22 |
| 19 Feb after | 30.0 °C | 45 % | 22 km/h | 0.0 mm | High 21 |
| 20 Feb after | 30.2 °C | 42 % | 28 km/h | 0.0 mm | High 23 |
| 21 Feb after | 29.5 °C | 42 % | 39 km/h | 0.0 mm | High 26 |
| 22 Feb after | 29.2 °C | 42 % | 41 km/h | 0.0 mm | High 27 |
| 23 Feb after | 29.9 °C | 40 % | 27 km/h | 0.0 mm | High 23 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 57Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 4,640 haDan Sai ด่านซ้าย10 March 2019 · 7 days · 0 km away
- 6,404 haDan Sai ด่านซ้ายMarch 2016 · 10 days · 2 km away
- 7,219 haLom Kao หล่มเก่า8 April 2026 · 14 days · 27 km away
- 7,064 haLom Kao หล่มเก่าFebruary 2021 · 9 days · 30 km away
- 6,306 haPhu Ruea ภูเรือ3 April 2026 · 13 days · 34 km away
- 5,317 haNa Haeo นาแห้ว21 March 2023 · 14 days · 34 km away
Frequently asked questions
- How long did the Dan Sai fire last?
- GWIS (Copernicus) dates it between 9 February 2020 and 13 February 2020: 5 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,577 hectares (15.8 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Dan Sai (1,585 ha, 1.2 %).
- What was the weather like?
- During the fire the temperature reached 32.5 °C, humidity dropped to 36 % and gusts hit 37 km/h. The fire danger index (FWI) reached 25, class High.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Thailand (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 199 · 191 · Emergency number and official warnings ›
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 57 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.