Cuango fire, July 2026 Cuango, Lubalo, Capenda-Camulemba
The fire started on 24 July 2026 in Cuango, Angola, and satellites saw it burning for 19 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 13,455 hectares from heat detections, spread across 3 municipalities.
It is the 46th largest in Lunda Norte since 2016 (of 411 with a page). Number 103 in Angola in 2026, of 486.
Compare with…
Suggestions: Cuango · 2020Cuango · 2023Lubalo · 2026Lubalo · 2017
- Burnt area
- 13,455ha
- GWIS perimeter (Copernicus)
- Duration
- 19days
- 24 Jul 2026 – 11 Aug 2026
- Municipalities hit
- 3
- municipalities
- Started on
- 24 Jul
- 2026
- Heat detections
- 337
- in a single hotspot: 315 MW
- Danger at start
- 41
- Very high · FWI index
- Average daily power
- 403MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone more than two months without rain (1 mm or more) when it started.
This area had burned before
85% of the perimeter overlaps earlier fires recorded since 2016: 2,534 ha in 2016, 2,683 ha in 2017, 109 ha in 2018, 2,090 ha in 2019, 6,290 ha in 2020, 1,959 ha in 2021, 3,789 ha in 2022, 3,742 ha in 2023, 2,200 ha in 2024, 1,532 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 11,371 ha that had burned before.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Cuango where it started11,823 ha reached on 22 Jul1.8 %
-
1,725 ha reached on 24 Jul0.1 %
-
4 ha reached on 8 Aug0.0 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 22 Jul | 33.4 °C | 17 % | 25 km/h | 0.0 mm | Very high 41 |
| 23 Jul | 33.5 °C | 14 % | 42 km/h | 0.0 mm | Very high 50 |
| 24 Jul | 33.1 °C | 21 % | 40 km/h | 0.0 mm | Very high 48 |
| 25 Jul | 32.1 °C | 24 % | 37 km/h | 0.0 mm | Very high 45 |
| 26 Jul | 32.0 °C | 25 % | 34 km/h | 0.0 mm | Very high 42 |
| 27 Jul | 31.7 °C | 28 % | 30 km/h | 0.0 mm | Very high 39 |
| 28 Jul | 31.6 °C | 20 % | 25 km/h | 0.0 mm | Very high 40 |
| 29 Jul | 31.6 °C | 20 % | 24 km/h | 0.0 mm | Very high 39 |
| 30 Jul | 30.2 °C | 26 % | 31 km/h | 0.0 mm | Very high 39 |
| 31 Jul | 31.5 °C | 24 % | 34 km/h | 0.0 mm | Very high 40 |
| 1 Aug | 31.5 °C | 23 % | 29 km/h | 0.0 mm | Very high 40 |
| 2 Aug | 32.4 °C | 20 % | 28 km/h | 0.0 mm | Very high 41 |
| 3 Aug | 30.9 °C | 23 % | 30 km/h | 0.0 mm | Very high 41 |
| 4 Aug | 30.9 °C | 28 % | 17 km/h | 0.0 mm | High 35 |
| 5 Aug | 32.0 °C | 22 % | 25 km/h | 0.0 mm | High 38 |
| 6 Aug | 32.9 °C | 17 % | 31 km/h | 0.0 mm | Very high 43 |
| 7 Aug | 32.4 °C | 20 % | 30 km/h | 0.0 mm | Very high 44 |
| 8 Aug | 32.1 °C | 24 % | 26 km/h | 0.0 mm | Very high 41 |
| 9 Aug | 31.5 °C | 27 % | 28 km/h | 0.0 mm | Very high 38 |
| 10 Aug | 32.1 °C | 27 % | 18 km/h | 0.0 mm | High 37 |
| 11 Aug | 31.3 °C | 30 % | 21 km/h | 0.0 mm | High 35 |
| 12 Aug after | 34.1 °C | 14 % | 32 km/h | 0.0 mm | Very high 45 |
| 13 Aug after | 32.5 °C | 27 % | 26 km/h | 0.0 mm | Very high 40 |
| 14 Aug after | 32.9 °C | 29 % | 39 km/h | 0.0 mm | Very high 41 |
| 15 Aug after | 33.1 °C | 27 % | 43 km/h | 0.0 mm | Very high 44 |
| 16 Aug after | 32.1 °C | 26 % | 27 km/h | 0.0 mm | Very high 40 |
| 17 Aug after | 33.4 °C | 18 % | 37 km/h | 0.0 mm | Very high 43 |
| 18 Aug after | 33.8 °C | 14 % | 40 km/h | 0.0 mm | Very high 48 |
| 19 Aug after | 33.5 °C | 15 % | 41 km/h | 0.0 mm | Very high 49 |
| 20 Aug after | 32.5 °C | 18 % | 37 km/h | 0.0 mm | Very high 48 |
| 21 Aug after | 31.4 °C | 25 % | 27 km/h | 0.0 mm | Very high 42 |
| 22 Aug after | 32.8 °C | 30 % | 21 km/h | 0.0 mm | High 38 |
| 23 Aug after | 34.0 °C | 23 % | 38 km/h | 0.0 mm | Very high 42 |
| 24 Aug after | 34.2 °C | 23 % | 33 km/h | 0.0 mm | Very high 39 |
| 25 Aug after | 32.9 °C | 31 % | 16 km/h | 0.0 mm | High 37 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 8 August 2026 the air beside the fire reached 205 µg/m³ of PM2.5. That day averaged 133: 8.9 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 337Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Cuango fire last?
- GWIS (Copernicus) dates it between 24 July 2026 and 11 August 2026: 19 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 13,455 hectares (134.6 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 3 municipalities: Cuango (11,823 ha, 1.8 %); Lubalo (1,725 ha, 0.1 %); Capenda-Camulemba (4 ha, 0.0 %).
- What was the weather like?
- During the fire the temperature reached 34.1 °C, humidity dropped to 14 % and gusts hit 43 km/h. The fire danger index (FWI) reached 50, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Angola (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 337 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.