Skip to content
worldfires
AU · Australia · →

Croydon fire, 29 October 2024 Croydon, Carpentaria

Out · last detection 13 Nov 2024, 04:24 UTC

The fire started on 29 October 2024 in Croydon, Australia, and satellites saw it burning for 15 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 44,072 hectares from heat detections, spread across 2 municipalities.

It is the 120th largest in Queensland since 2016 (of 1737 with a page). Number 34 in Australia in 2024, of 638.

Compare with…
Burnt area
44,072ha
GWIS perimeter (Copernicus)
Duration
15days
29 Oct 2024 – 12 Nov 2024
Municipalities hit
2
local government areas
Started on
29 Oct
2024
Heat detections
815
in a single hotspot: 100 MW
Danger at start
58
Extreme · FWI index
Average daily power
554MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 29 Oct12 Nov
13 Nov 2024

How it evolved, day by day

29 Oct 2024 · 180 MW · 43 30 Oct 2024 · 452 MW · 62 31 Oct 2024 · 314 MW · 17 1 Nov 2024 · 218 MW · 15 2 Nov 2024 · 925 MW · 138 7 Nov 2024 · 1,977 MW · 213 8 Nov 2024 · 1,103 MW · 133 9 Nov 2024 · 764 MW · 81 10 Nov 2024 · 355 MW · 54 11 Nov 2024 · 241 MW · 31 12 Nov 2024 · 90 MW · 25 13 Nov 2024 · 34 MW · 1
29 Oct 31 Oct 2 Nov 7 Nov 8 Nov 10 Nov 12 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

41°high
49km/h · peak gust
10%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 1.5 mm on 14 Nov.

This area had burned before

56% of the perimeter overlaps earlier fires recorded since 2016: 5,593 ha in 2016, 15,215 ha in 2017, 1,562 ha in 2018, 132 ha in 2019, 5,406 ha in 2021, 659 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 24,514 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 28% of the area of London (441 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Croydon where it started
    29,748 ha reached on 28 Oct
    1.0 %
  2. 14,820 ha reached on 1 Nov
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
28 Oct 38.6 °C 21 % 38 km/h 0.0 mm Extreme 58
29 Oct 38.0 °C 27 % 37 km/h 0.1 mm Extreme 51
30 Oct 38.1 °C 17 % 37 km/h 0.0 mm Extreme 51
31 Oct 36.6 °C 16 % 47 km/h 0.0 mm Extreme 59
1 Nov 36.9 °C 26 % 49 km/h 0.8 mm Very high 47
2 Nov 38.1 °C 13 % 30 km/h 0.0 mm Extreme 50
3 Nov 38.3 °C 15 % 34 km/h 0.0 mm Extreme 58
4 Nov 39.1 °C 14 % 38 km/h 0.0 mm Extreme 58
5 Nov 40.2 °C 15 % 37 km/h 0.0 mm Extreme 58
6 Nov 40.3 °C 10 % 34 km/h 0.0 mm Extreme 60
7 Nov 39.7 °C 13 % 39 km/h 0.0 mm Extreme 62
8 Nov 40.9 °C 16 % 35 km/h 0.0 mm Extreme 59
9 Nov 41.2 °C 16 % 38 km/h 0.0 mm Extreme 61
10 Nov 40.2 °C 20 % 40 km/h 0.0 mm Extreme 60
11 Nov 40.3 °C 20 % 46 km/h 0.3 mm Extreme 66
12 Nov 39.8 °C 26 % 39 km/h 0.1 mm Extreme 57
13 Nov after 38.8 °C 31 % 35 km/h 0.6 mm Very high 42
14 Nov after 38.7 °C 32 % 33 km/h 1.5 mm High 32

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 22 Oct 2024
After · 19 Nov 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 8 November 2024 the air beside the fire reached 122 µg/m³ of PM2.5. That day averaged 69: 4.6 times the WHO daily guideline (15).

PM2.5 peak122 µg/m³
Days over the guideline13 days
PM10175 µg/m³
Optical depth1.98
2728293031123456789101112131415
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 815Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia ›

Frequently asked questions

How long did the Croydon fire last?
GWIS (Copernicus) dates it between 29 October 2024 and 12 November 2024: 15 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 44,072 hectares (440.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Croydon (29,748 ha, 1.0 %); Carpentaria (14,820 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 41.2 °C, humidity dropped to 10 % and gusts hit 49 km/h. The fire danger index (FWI) reached 66, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings ›

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 815 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.