Skip to content
worldfires
IT · Italy · –

Cravagliana fire, 5 August 2026 Cravagliana, Rimella

Out · last detection 16 Aug 2026, 01:37 UTC

The fire started on 5 August 2026 in Cravagliana, Italy, and satellites saw it burning for 12 days. Copernicus mapped a burnt perimeter of 179 hectares from satellite imagery, spread across 2 municipalities.

Number 125 in Italy in 2026, of 232.

The power measured by the satellite is low (9.1 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
179ha
Copernicus perimeter
Duration
≈ 12days
5 Aug 2026 – 16 Aug 2026
Municipalities hit
2
municipalities
Started on
5 Aug
2026
Heat detections
21
in a single hotspot: 9 MW
Danger at start
0
Very low · FWI index
Average daily power
10MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 5 Aug16 Aug
16 Aug 2026

How it evolved, day by day

9 Aug 2026 · 7 MW · 1 10 Aug 2026 · 7 MW · 2 12 Aug 2026 · 3 MW · 3 13 Aug 2026 · 4 MW · 3 14 Aug 2026 · 22 MW · 5 15 Aug 2026 · 23 MW · 4 16 Aug 2026 · 4 MW · 3
9 Aug 12 Aug 15 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

24°high
32km/h · peak gust
50%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 1.6 mm on 17 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

What happened to each town

  1. Cravagliana 256 inhabitants · 3.2 km from the centre where it started
    176 ha reached on 9 Aug
    5.0 %
  2. Rimella 134 inhabitants · 1.0 km from the centre
    3 ha reached on 12 Aug
    0.1 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land51 %
  • Scrub and transitional woodland47 %
  • Broadleaved forest2.2 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
5 Aug 23.6 °C 57 % 30 km/h 8.9 mm Very low 0
6 Aug 23.7 °C 50 % 30 km/h 11.6 mm Very low 0
7 Aug 19.8 °C 65 % 29 km/h 21.6 mm Very low 0
8 Aug 21.6 °C 64 % 30 km/h 2.2 mm Very low 0
9 Aug 22.0 °C 74 % 28 km/h 17.1 mm Very low 0
10 Aug 22.0 °C 60 % 27 km/h 3.4 mm Very low 0
11 Aug 22.8 °C 53 % 26 km/h 5.8 mm Very low 0
12 Aug 24.0 °C 55 % 27 km/h 0.2 mm Very low 0
13 Aug 24.0 °C 62 % 32 km/h 1.0 mm Very low 0
14 Aug 22.4 °C 61 % 29 km/h 1.9 mm Very low 1
15 Aug 21.2 °C 59 % 26 km/h 2.4 mm Very low 1
16 Aug 21.5 °C 58 % 24 km/h 7.0 mm Very low 0
17 Aug after 18.5 °C 54 % 29 km/h 1.6 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 0.3, a minimum humidity of 57% and rain the day before. Fires in the area that started in weather like this since 2016: 12.

FWI at the start 0.3
Minimum humidity 57 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Frabosa Sottana fire, November 2025
163 ha 3 days FWI 0.9 Min. humidity 55 % 180 km away, in 2025

First rain (1 mm or more) after it ended: 6.7 mm on 14 Nov.

What happened to them

Fires in the area that started in similar weather: 12. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.6 mmfirst rain
17 Augthe day after it ended
32km/h · max. gust

It was considered over on 16 Aug, and on 17 Aug 1.6 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 29 Jul 2026
After · 23 Aug 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 8 August 2026 the air beside the fire reached 23 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak23 µg/m³
Days over the guideline0 days
PM1033 µg/m³
Optical depth0.53
3 Aug5 Aug7 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 21Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Italy

Frequently asked questions

How long did the Cravagliana fire last?
The official perimeter only gives the start date (5 August 2026). The end comes from the heat detections inside the perimeter: it burned until 16 August 2026 (12 days from 5 August 2026), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 179 hectares (1.8 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Cravagliana (176 ha, 5.0 %); Rimella (3 ha, 0.1 %).
Did the fire reach a town?
The fire came within 1.0 km of the centre of Rimella, the closest of the areas it touched. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 24.0 °C, humidity dropped to 50 % and gusts hit 32 km/h. The fire danger index (FWI) reached 1, class Very low.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Italy (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · 1515 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112 · 1515.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 21 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM4 (Creative Commons Attribution 3.0 License). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.