Skip to content
worldfires
MX · Mexico · –

Coyuca de Catalán fire, 7 May 2019 Coyuca de Catalán

Out · last detection 17 May 2019, 07:29 UTC

The fire started on 7 May 2019 in Coyuca de Catalán, Mexico, and satellites saw it burning for 13 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,687 hectares from heat detections, spread across a single municipality.

It is the 516th largest in Guerrero since 2016 (of 582 with a page). Number 316 in Mexico in 2019, of 363.

Burnt area
1,687ha
GWIS perimeter (Copernicus)
Duration
13days
7 May 2019 – 19 May 2019
Municipalities hit
1
municipalities
Started on
7 May
2019
Heat detections
81
in a single hotspot: 31 MW
Danger at start
40
Very high · FWI index
Average daily power
45MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 7 May19 May
17 May 2019

How it evolved, day by day

7 May 2019 · 4 MW · 1 8 May 2019 · 54 MW · 13 9 May 2019 · 4 MW · 3 11 May 2019 · 18 MW · 5 12 May 2019 · 19 MW · 3 13 May 2019 · 45 MW · 8 14 May 2019 · 93 MW · 19 15 May 2019 · 134 MW · 19 16 May 2019 · 77 MW · 9 17 May 2019 · 3 MW · 1
7 May 9 May 12 May 15 May

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

23°high
44km/h · peak gust
14%lowest humidity

It had gone 49 days without rain (1 mm or more) when it started. Rain came after the fire: 1.6 mm on 23 May.

This area had burned before

61% of the perimeter overlaps earlier fires recorded since 2016: 1,022 ha in 2017.

How big is it?

10 km
It burned the equivalent of 1.1% of the area of London (17 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Coyuca de Catalán where it started
    1,693 ha reached on 7 May
    0.5 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.15 ha
Residents< 20

Inside the perimeter there were about 0.15 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
7 May 23.3 °C 18 % 43 km/h 0.0 mm Very high 40
8 May 23.0 °C 14 % 39 km/h 0.0 mm Very high 44
9 May 21.7 °C 24 % 44 km/h 0.0 mm Very high 44
10 May 21.8 °C 22 % 39 km/h 0.0 mm Very high 41
11 May 20.7 °C 35 % 37 km/h 0.2 mm High 33
12 May 21.6 °C 40 % 35 km/h 0.0 mm High 31
13 May 21.2 °C 44 % 38 km/h 0.5 mm High 29
14 May 21.3 °C 41 % 38 km/h 0.0 mm High 30
15 May 21.7 °C 38 % 38 km/h 0.6 mm High 29
16 May 21.6 °C 38 % 40 km/h 1.6 mm High 25
17 May 20.7 °C 48 % 37 km/h 2.5 mm Low 10
18 May 21.5 °C 51 % 35 km/h 2.2 mm Low 6
19 May 22.1 °C 38 % 32 km/h 0.0 mm Low 6
20 May after 22.3 °C 41 % 34 km/h 0.0 mm Moderate 15
21 May after 22.8 °C 40 % 35 km/h 0.3 mm High 21
22 May after 21.1 °C 44 % 34 km/h 0.1 mm High 22
23 May after 21.7 °C 50 % 31 km/h 1.6 mm Moderate 19

Its twins: fires that started in the same weather

It started with an FWI of 40.4, a minimum humidity of 18% and 49 days without rain. Fires in the area that started in weather like this since 2016: 19.

FWI at the start 40.4
Minimum humidity 18 %
Days without rain 49
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

San Miguel Totolapan fire, May 2020
3,024 ha 13 days FWI 40.6 Min. humidity 19 % 73 km away, in 2020

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

13 days
median duration
2,659 ha
median area
100 %
went past 1,000 ha
2.0 mm
rain at the end (median; 9 of 19 had it)

It stayed below its twins: 1,687 ha against a median of 2,659 ha. It lasted 13 days, against 13 days.

In 10 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.6 mmfirst rain
23 May4 days after it ended
44km/h · max. gust

It was considered over on 19 May, and on 23 May 1.6 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 9 of 19, with a median of 2.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 30 Apr 2019
After · 26 May 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 81Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mexico

Frequently asked questions

How long did the Coyuca de Catalán fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 7 May 2019 to 19 May 2019 (13 days). The perimeter dates it from 7 May 2019 to 17 May 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,687 hectares (16.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Coyuca de Catalán (1,693 ha, 0.5 %).
What was the weather like?
During the fire the temperature reached 23.3 °C, humidity dropped to 14 % and gusts hit 44 km/h. The fire danger index (FWI) reached 44, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mexico (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 19. Their median duration was 13 days and their median area 2,659 ha; 100 % went past 1,000 ha. In 10 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 17 May 2019 → 19 May 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 7 May 2019 to 17 May 2019. 81 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.