Skip to content
worldfires
US · United States · –

Cougar Creek Fire, July 2018 Chelan

Out · last detection 8 Sept 2018, 09:09 UTC

The fire started on 28 July 2018 in Chelan, United States, and satellites saw it burning for 43 days. United States agencies (MTBS / NIFC) mapped an official burnt perimeter of 17,272 hectares, spread across a single county.

It is the 27th largest in Washington since 2016 (of 285 with a page). Number 43 in United States in 2018, of 511.

Burnt area
17,272ha
official perimeter (MTBS / NIFC)
Duration
≈ 43days
28 Jul 2018 – 8 Sept 2018
Counties hit
1
counties
Started on
28 Jul
2018
Heat detections
5,625
in a single hotspot: 322 MW
Danger at start
35
High · FWI index
Average daily power
2.3GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 28 Jul8 Sept
8 Sept 2018

How it evolved, day by day

29 Jul 2018 · 159 MW · 9 30 Jul 2018 · 1,034 MW · 35 31 Jul 2018 · 764 MW · 41 1 Aug 2018 · 1,483 MW · 95 2 Aug 2018 · 4,525 MW · 145 3 Aug 2018 · 2,243 MW · 171 4 Aug 2018 · 1,506 MW · 127 5 Aug 2018 · 1,028 MW · 104 6 Aug 2018 · 1,865 MW · 132 7 Aug 2018 · 3,399 MW · 290 8 Aug 2018 · 5,087 MW · 263 9 Aug 2018 · 6,951 MW · 296 10 Aug 2018 · 7,639 MW · 321 11 Aug 2018 · 18,010 MW · 525 12 Aug 2018 · 5,006 MW · 594 13 Aug 2018 · 5,294 MW · 393 14 Aug 2018 · 2,585 MW · 222 15 Aug 2018 · 4,679 MW · 241 16 Aug 2018 · 7,716 MW · 314 17 Aug 2018 · 2,086 MW · 228 18 Aug 2018 · 2,528 MW · 129 19 Aug 2018 · 2,960 MW · 186 20 Aug 2018 · 2,993 MW · 183 21 Aug 2018 · 994 MW · 126 22 Aug 2018 · 938 MW · 115 23 Aug 2018 · 511 MW · 122 24 Aug 2018 · 552 MW · 71 25 Aug 2018 · 106 MW · 32 26 Aug 2018 · 14 MW · 4 27 Aug 2018 · 1 MW · 1 28 Aug 2018 · 25 MW · 11 29 Aug 2018 · 158 MW · 26 30 Aug 2018 · 32 MW · 5 31 Aug 2018 · 58 MW · 15 1 Sept 2018 · 11 MW · 2 2 Sept 2018 · 60 MW · 11 3 Sept 2018 · 3 MW · 3 5 Sept 2018 · 10 MW · 7 6 Sept 2018 · 193 MW · 10 7 Sept 2018 · 90 MW · 19 8 Sept 2018 · 1 MW · 1
29 Jul 11 Aug 25 Aug 3 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
68km/h · peak gust
11%lowest humidity

It had gone 21 days without rain (1 mm or more) when it started. Rain came after the fire: 1.4 mm on 9 Sept.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 11% of the area of London (173 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each county

  1. Chelan where it started
    17,215 ha reached on 29 Jul
    2.2 %

Burnt area inside each county, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.41 ha
Residents< 20

Inside the perimeter there were about 0.41 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
28 Jul 29.1 °C 15 % 35 km/h 0.4 mm High 35
29 Jul 30.9 °C 11 % 26 km/h 0.0 mm Very high 41
30 Jul 31.2 °C 13 % 25 km/h 0.0 mm Very high 45
31 Jul 29.1 °C 20 % 44 km/h 0.0 mm Very high 39
1 Aug 24.8 °C 26 % 55 km/h 0.0 mm Very high 48
2 Aug 21.3 °C 31 % 60 km/h 0.0 mm Very high 45
3 Aug 19.1 °C 35 % 55 km/h 0.0 mm High 36
4 Aug 22.4 °C 30 % 31 km/h 0.0 mm High 26
5 Aug 26.5 °C 17 % 28 km/h 0.0 mm High 31
6 Aug 27.8 °C 15 % 48 km/h 0.0 mm High 36
7 Aug 30.4 °C 16 % 27 km/h 0.0 mm High 34
8 Aug 32.5 °C 17 % 27 km/h 0.0 mm Very high 39
9 Aug 33.3 °C 18 % 26 km/h 0.0 mm High 37
10 Aug 31.2 °C 23 % 44 km/h 0.0 mm Very high 41
11 Aug 20.2 °C 40 % 68 km/h 0.0 mm Very high 41
12 Aug 20.9 °C 36 % 36 km/h 0.0 mm High 28
13 Aug 23.4 °C 28 % 22 km/h 0.0 mm High 26
14 Aug 26.7 °C 23 % 22 km/h 0.0 mm High 27
15 Aug 27.8 °C 18 % 34 km/h 0.0 mm High 35
16 Aug 27.0 °C 21 % 36 km/h 0.0 mm High 36
17 Aug 24.5 °C 24 % 46 km/h 0.0 mm High 37
18 Aug 25.5 °C 23 % 30 km/h 0.0 mm High 33
19 Aug 22.6 °C 31 % 22 km/h 0.0 mm High 31
20 Aug 24.0 °C 28 % 42 km/h 0.0 mm High 38
21 Aug 25.2 °C 18 % 27 km/h 0.0 mm High 33
22 Aug 27.3 °C 22 % 46 km/h 0.0 mm High 32
23 Aug 20.4 °C 36 % 55 km/h 0.0 mm Very high 40
24 Aug 17.5 °C 33 % 48 km/h 0.0 mm High 34
25 Aug 14.7 °C 47 % 45 km/h 0.0 mm High 24
26 Aug 12.9 °C 58 % 45 km/h 0.6 mm High 24
27 Aug 20.0 °C 26 % 30 km/h 0.0 mm High 24
28 Aug 24.0 °C 24 % 31 km/h 0.0 mm High 25
29 Aug 21.8 °C 26 % 53 km/h 0.0 mm High 32
30 Aug 18.7 °C 32 % 56 km/h 0.0 mm High 33
31 Aug 19.0 °C 34 % 51 km/h 0.0 mm High 31
1 Sept 19.7 °C 25 % 46 km/h 0.0 mm High 27
2 Sept 22.2 °C 22 % 52 km/h 0.0 mm High 29
3 Sept 20.0 °C 24 % 43 km/h 0.0 mm High 29
4 Sept 19.7 °C 25 % 24 km/h 0.0 mm High 27
5 Sept 22.3 °C 15 % 26 km/h 0.0 mm High 35
6 Sept 25.2 °C 17 % 27 km/h 0.0 mm High 36
7 Sept 23.7 °C 26 % 45 km/h 0.0 mm High 36
8 Sept 16.6 °C 38 % 46 km/h 0.0 mm High 36
9 Sept after 20.1 °C 31 % 36 km/h 1.4 mm High 30

Its twins: fires that started in the same weather

It started with an FWI of 34.6, a minimum humidity of 15% and 21 days without rain. Fires in the area that started in weather like this since 2016: 42.

FWI at the start 34.6
Minimum humidity 15 %
Days without rain 21
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Okanagan-Similkameen D fire, July 2022
6,429 ha 82 days FWI 32.5 Min. humidity 15 % 176 km away, in 2022

First rain (1 mm or more) after it ended: 2.9 mm on 21 Oct.

What happened to them

8 days
median duration
2,408 ha
median area
71 %
went past 1,000 ha
2.9 mm
rain at the end (median; 25 of 42 had it)

It was 7.2 times larger than the median of its twins and lasted 43 days, against 8 days.

Only 4 of its 42 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 17 of 42, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.9 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.4 mmfirst rain
9 Septthe day after it ended
68km/h · max. gust

It was considered over on 8 Sept, and on 9 Sept 1.4 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 25 of 42, with a median of 2.9 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 21 Jul 2018
After · 15 Sept 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 5,625Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in United States

Frequently asked questions

How long did the Cougar Creek Fire last?
The official perimeter only gives the start date (28 July 2018). The end comes from the heat detections inside the perimeter: it burned until 8 September 2018 (43 days from 28 July 2018), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The official perimeter published by United States agencies (MTBS / NIFC) is 17,272 hectares (172.7 km²). Other tallies, such as daily incident reports, may give slightly different figures.
Which counties burned?
The fire only entered Chelan (17,215 ha, 2.2 %).
What was the weather like?
During the fire the temperature reached 33.3 °C, humidity dropped to 11 % and gusts hit 68 km/h. The fire danger index (FWI) reached 48, class Very high.
Where does this data come from?
From the official burnt perimeter of United States agencies (MTBS / NIFC, public domain), NASA FIRMS VIIRS hotspots and the administrative boundaries of United States. It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 42. Their median duration was 8 days and their median area 2,408 ha; 71 % went past 1,000 ha. Only 4 of its 42 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 17 of 42, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.9 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: MTBS (US Geological Survey and US Forest Service), official.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 5,625 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official and in the public domain. For past years it comes from MTBS (Monitoring Trends in Burn Severity), run by the U.S. Geological Survey and the USDA Forest Service, which map it on Landsat and Sentinel-2 imagery. For the current and last year it comes from WFIGS at the National Interagency Fire Center (NIFC): incident perimeters mapped by fire crews, aircraft and imagery. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. County boundaries come from geoBoundaries ADM2 (Public Domain). The area per county is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.