Cook fire, 7 July 2026 Cook, Carpentaria
The fire started on 7 July 2026 in Cook, Australia, and satellites saw it burning for 5 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 9,244 hectares from heat detections, spread across 2 municipalities.
It is the 842th largest in Queensland since 2016 (of 1737 with a page). Number 375 in Australia in 2026, of 859.
- Burnt area
- 9,244ha
- GWIS perimeter (Copernicus)
- Duration
- 5days
- 7 Jul 2026 – 11 Jul 2026
- Municipalities hit
- 2
- local government areas
- Started on
- 7 Jul
- 2026
- Heat detections
- 143
- in a single hotspot: 66 MW
- Danger at start
- 9
- Low · FWI index
- Energy released
- 1.3GW
- sum of detected power
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 0 days without rain (1 mm or more) when it started.
This area had burned before
86% of the perimeter overlaps earlier fires recorded since 2016: 3,350 ha in 2016, 959 ha in 2017, 3,035 ha in 2018, 1,997 ha in 2019, 3,638 ha in 2020, 3,135 ha in 2021, 2,012 ha in 2022, 2,249 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 7,918 ha that had burned before.
- 2,491 ha Carpentaria fire, September 2020 25,297 ha in total; the hectares shown are those it shares with this fire
- 1,999 ha Cook fire, October 2021 6,589 ha in total; the hectares shown are those it shares with this fire
- 836 ha Cook fire, October 2016 8,506 ha in total; the hectares shown are those it shares with this fire
- 106 ha Cook fire, October 2020 15,158 ha in total; the hectares shown are those it shares with this fire
What happened to each town
-
Cook where it started7,959 ha reached on 7 Jul0.1 %
-
1,385 ha reached on 8 Jul0.0 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 9 Jul | 31.0 °C | 27 % | 18 km/h | 0.0 mm | Low 9 |
| 10 Jul | 31.1 °C | 31 % | 12 km/h | 0.0 mm | Low 9 |
| 11 Jul | 31.2 °C | 29 % | 14 km/h | 0.0 mm | Moderate 11 |
| 12 Jul after | 31.0 °C | 31 % | 14 km/h | 0.0 mm | Moderate 13 |
| 13 Jul after | 31.1 °C | 31 % | 17 km/h | 0.0 mm | Moderate 15 |
| 14 Jul after | 30.8 °C | 30 % | 17 km/h | 0.0 mm | Moderate 16 |
| 15 Jul after | 30.8 °C | 26 % | 19 km/h | 0.0 mm | Moderate 19 |
| 16 Jul after | 28.9 °C | 25 % | 17 km/h | 0.0 mm | Moderate 19 |
| 17 Jul after | 27.9 °C | 20 % | 13 km/h | 0.0 mm | Moderate 19 |
| 18 Jul after | 28.5 °C | 24 % | 14 km/h | 0.0 mm | Moderate 21 |
| 19 Jul after | 29.1 °C | 23 % | 17 km/h | 0.0 mm | High 24 |
| 20 Jul after | 29.4 °C | 14 % | 19 km/h | 0.0 mm | High 30 |
| 21 Jul after | 31.0 °C | 25 % | 14 km/h | 0.0 mm | High 26 |
| 22 Jul after | 31.2 °C | 32 % | 11 km/h | 0.0 mm | High 23 |
| 23 Jul after | 31.5 °C | 31 % | 15 km/h | 0.2 mm | High 26 |
| 24 Jul after | 31.0 °C | 27 % | 14 km/h | 0.0 mm | High 27 |
| 25 Jul after | 29.5 °C | 24 % | 16 km/h | 0.0 mm | High 29 |
| 26 Jul after | 30.9 °C | 23 % | 12 km/h | 0.0 mm | High 27 |
| 27 Jul after | 32.0 °C | 29 % | 18 km/h | 0.3 mm | High 32 |
| 28 Jul after | 30.0 °C | 42 % | 40 km/h | 0.1 mm | High 30 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 21 July 2026 the air beside the fire reached 87 µg/m³ of PM2.5. That day averaged 44: 3.0 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 143Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 25,297 haCarpentariaSeptember 2020 · 12 days · 8 km away
- 15,158 haCook8 October 2020 · 12 days · 16 km away
- 23,862 haCook31 October 2021 · 15 days · 20 km away
- 12,986 haCook19 October 2020 · 5 days · 28 km away
- 26,953 haCook18 July 2026 · 9 days · 29 km away
- 21,896 haCook24 September 2018 · 12 days · 37 km away
Frequently asked questions
- How long did the Cook fire last?
- GWIS (Copernicus) dates it between 7 July 2026 and 11 July 2026: 5 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 9,244 hectares (92.4 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 2 municipalities: Cook (7,959 ha, 0.1 %); Carpentaria (1,385 ha, 0.0 %).
- What was the weather like?
- During the fire the temperature reached 31.2 °C, humidity dropped to 20 % and gusts hit 19 km/h. The fire danger index (FWI) reached 21, class Moderate.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 000
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.