Cook fire, 3 October 2024 Cook
The fire started on 3 October 2024 in Cook, Australia, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,102 hectares from heat detections, spread across a single municipality.
It is the 1686th largest in Queensland since 2016 (of 1737 with a page). Number 615 in Australia in 2024, of 638.
- Burnt area
- 5,102ha
- GWIS perimeter (Copernicus)
- Duration
- 9days
- 3 Oct 2024 – 11 Oct 2024
- Municipalities hit
- 1
- local government areas
- Started on
- 3 Oct
- 2024
- Heat detections
- 225
- in a single hotspot: 36 MW
- Danger at start
- 15
- Moderate · FWI index
- Energy released
- 1.5GW
- sum of detected power
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 11 days without rain (1 mm or more) when it started. Rain came after the fire: 1.0 mm on 15 Oct.
This area had burned before
87% of the perimeter overlaps earlier fires recorded since 2016: 754 ha in 2016, 1,695 ha in 2017, 729 ha in 2018, 3,029 ha in 2020, 430 ha in 2021, 243 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 4,436 ha that had burned before.
What happened to each town
-
Cook where it started5,175 ha reached on 3 Oct0.0 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 3 Oct | 26.9 °C | 57 % | 64 km/h | 0.2 mm | Moderate 15 |
| 4 Oct | 26.4 °C | 62 % | 61 km/h | 0.5 mm | Moderate 15 |
| 5 Oct | 27.0 °C | 54 % | 49 km/h | 0.0 mm | Moderate 13 |
| 6 Oct | 27.5 °C | 54 % | 47 km/h | 0.0 mm | Moderate 13 |
| 7 Oct | 28.0 °C | 59 % | 49 km/h | 0.0 mm | Moderate 14 |
| 8 Oct | 28.5 °C | 72 % | 48 km/h | 1.1 mm | Low 7 |
| 9 Oct | 28.8 °C | 69 % | 38 km/h | 0.6 mm | Low 7 |
| 10 Oct | 28.8 °C | 68 % | 44 km/h | 0.5 mm | Low 9 |
| 11 Oct | 27.8 °C | 63 % | 56 km/h | 0.0 mm | Moderate 13 |
| 12 Oct after | 28.0 °C | 59 % | 56 km/h | 0.4 mm | Moderate 16 |
| 13 Oct after | 27.7 °C | 59 % | 51 km/h | 0.4 mm | Moderate 15 |
| 14 Oct after | 28.2 °C | 58 % | 47 km/h | 0.0 mm | Moderate 16 |
| 15 Oct after | 27.1 °C | 70 % | 54 km/h | 1.0 mm | Low 10 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 8 October 2024 the air beside the fire reached 19 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 225Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 115,896 haCook5 September 2018 · 63 days · 18 km away
- 27,163 haCook25 November 2023 · 17 days · 30 km away
- 107,807 haCook23 October 2023 · 50 days · 36 km away
- 9,444 haHope ValeNovember 2025 · 12 days · 36 km away
- 120,009 haCook15 November 2016 · 40 days · 37 km away
- 25,573 haCook3 October 2020 · 23 days · 37 km away
Frequently asked questions
- How long did the Cook fire last?
- GWIS (Copernicus) dates it between 3 October 2024 and 11 October 2024: 9 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,102 hectares (51.0 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Cook (5,175 ha, 0.0 %).
- What was the weather like?
- During the fire the temperature reached 28.8 °C, humidity dropped to 54 % and gusts hit 64 km/h. The fire danger index (FWI) reached 15, class Moderate.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 000
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.