Cook fire, 15 October 2016 Cook
The fire started on 15 October 2016 in Cook, Australia, and satellites saw it burning for 21 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 12,285 hectares from heat detections, spread across a single municipality.
It is the 596th largest in Queensland since 2016 (of 1737 with a page). Number 114 in Australia in 2016, of 427.
The power measured by the satellite is low (23.5 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.
- Burnt area
- 12,285ha
- GWIS perimeter (Copernicus)
- Duration
- 21days
- 15 Oct 2016 – 4 Nov 2016
- Municipalities hit
- 1
- local government areas
- Started on
- 15 Oct
- 2016
- Heat detections
- 451
- in a single hotspot: 23 MW
- Danger at start
- 18
- Moderate · FWI index
- Energy released
- 2.3GW
- sum of detected power
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 6 days without rain (1 mm or more) when it started.
This area had burned before
No earlier perimeters overlap this fire since 2016, when the satellite record begins.
What happened to each town
-
Cook where it started12,377 ha reached on 12 Oct0.1 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 12 Oct | 30.6 °C | 46 % | 37 km/h | 0.0 mm | Moderate 18 |
| 13 Oct | 29.0 °C | 57 % | 38 km/h | 0.0 mm | Moderate 18 |
| 14 Oct | 28.1 °C | 63 % | 39 km/h | 0.0 mm | Moderate 17 |
| 15 Oct | 28.8 °C | 62 % | 48 km/h | 0.3 mm | Moderate 19 |
| 16 Oct | 28.9 °C | 58 % | 54 km/h | 0.0 mm | Moderate 20 |
| 17 Oct | 28.8 °C | 58 % | 45 km/h | 0.0 mm | Moderate 19 |
| 18 Oct | 29.6 °C | 56 % | 40 km/h | 0.0 mm | Moderate 18 |
| 19 Oct | 29.3 °C | 57 % | 48 km/h | 0.0 mm | Moderate 20 |
| 20 Oct | 28.9 °C | 59 % | 52 km/h | 0.0 mm | High 22 |
| 21 Oct | 29.1 °C | 61 % | 56 km/h | 0.2 mm | High 23 |
| 22 Oct | 28.8 °C | 57 % | 48 km/h | 1.2 mm | Moderate 13 |
| 23 Oct | 29.4 °C | 58 % | 40 km/h | 0.0 mm | Moderate 16 |
| 24 Oct | 29.3 °C | 59 % | 45 km/h | 0.1 mm | Moderate 18 |
| 25 Oct | 29.2 °C | 63 % | 56 km/h | 0.5 mm | Moderate 21 |
| 26 Oct | 30.0 °C | 50 % | 45 km/h | 0.0 mm | High 22 |
| 27 Oct | 29.3 °C | 59 % | 46 km/h | 0.0 mm | High 22 |
| 28 Oct | 30.3 °C | 55 % | 41 km/h | 0.0 mm | Moderate 21 |
| 29 Oct | 30.3 °C | 54 % | 42 km/h | 0.6 mm | Moderate 20 |
| 30 Oct | 29.4 °C | 56 % | 48 km/h | 0.0 mm | Moderate 21 |
| 31 Oct | 29.8 °C | 54 % | 45 km/h | 0.0 mm | High 22 |
| 1 Nov | 29.9 °C | 44 % | 37 km/h | 0.0 mm | High 22 |
| 2 Nov | 30.0 °C | 62 % | 42 km/h | 0.0 mm | Moderate 21 |
| 3 Nov | 30.1 °C | 56 % | 48 km/h | 0.0 mm | High 24 |
| 4 Nov | 29.8 °C | 65 % | 40 km/h | 0.5 mm | Moderate 20 |
| 5 Nov after | 30.0 °C | 57 % | 39 km/h | 0.0 mm | Moderate 19 |
| 6 Nov after | 30.2 °C | 58 % | 38 km/h | 0.0 mm | Moderate 20 |
| 7 Nov after | 30.8 °C | 56 % | 36 km/h | 0.0 mm | Moderate 19 |
| 8 Nov after | 31.5 °C | 50 % | 35 km/h | 0.0 mm | Moderate 21 |
| 9 Nov after | 31.3 °C | 54 % | 35 km/h | 0.0 mm | Moderate 21 |
| 10 Nov after | 31.2 °C | 61 % | 34 km/h | 0.2 mm | Moderate 21 |
| 11 Nov after | 31.3 °C | 57 % | 34 km/h | 0.0 mm | Moderate 20 |
| 12 Nov after | 32.1 °C | 53 % | 36 km/h | 0.0 mm | High 23 |
| 13 Nov after | 32.4 °C | 47 % | 35 km/h | 0.2 mm | High 24 |
| 14 Nov after | 32.4 °C | 52 % | 36 km/h | 0.6 mm | Moderate 21 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 451Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Cook fire last?
- GWIS (Copernicus) dates it between 15 October 2016 and 4 November 2016: 21 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 12,285 hectares (122.8 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Cook (12,377 ha, 0.1 %).
- What was the weather like?
- During the fire the temperature reached 30.6 °C, humidity dropped to 44 % and gusts hit 56 km/h. The fire danger index (FWI) reached 24, class High.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 000
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.