Skip to content
worldfires
PE · Peru · –

Concepción fire, September 2016 Jauja, Concepción, Yauyos

Out · last detection 14 Sept 2016, 18:12 UTC

The fire started on 12 September 2016 in Concepción, Peru, and satellites saw it burning for 3 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,163 hectares from heat detections, spread across 3 municipalities.

It is the largest fire in Junín since 2016 (of 14 with a page). Number 5 in Peru in 2016, of 58.

Compare with…
Burnt area
3,163ha
GWIS perimeter (Copernicus)
Duration
3days
12 Sept 2016 – 14 Sept 2016
Municipalities hit
3
provinces
Started on
12 Sept
2016
Heat detections
99
in a single hotspot: 64 MW
Danger at start
2
Very low · FWI index
Average daily power
681MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Sept14 Sept
14 Sept 2016

How it evolved, day by day

12 Sept 2016 · 1,779 MW · 76 13 Sept 2016 · 251 MW · 21 14 Sept 2016 · 12 MW · 2
12 Sept 13 Sept 14 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

11°high
44km/h · peak gust
35%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 6.7 mm on 15 Sept.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 2% of the area of London (32 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Jauja 8,927 inhabitants
    2,273 ha
    0.5 %
  2. Concepción 2,092 inhabitants where it started
    893 ha
    0.4 %
  3. Yauyos 1,501 inhabitants
    20 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Sept 10.9 °C 43 % 44 km/h 0.0 mm Very low 2
13 Sept 10.8 °C 40 % 35 km/h 0.0 mm Very low 4
14 Sept 10.5 °C 35 % 33 km/h 0.0 mm Low 5
15 Sept after 9.7 °C 54 % 32 km/h 6.7 mm Very low 5

Its twins: fires that started in the same weather

It started with an FWI of 1.8, a minimum humidity of 43% and 1 day without rain. Fires in the area that started in weather like this since 2016: 13.

FWI at the start 1.8
Minimum humidity 43 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Chupaca fire, June 2016
1,485 ha 1 day FWI 0.2 Min. humidity 45 % 45 km away, in 2016

First rain (1 mm or more) after it ended: 10.1 mm on 6 Jul.

What happened to them

Fires in the area that started in similar weather: 13. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

6.7 mmfirst rain
15 Septthe day after it ended
44km/h · max. gust

It was considered over on 14 Sept, and on 15 Sept 6.7 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Sept 2016
After · 21 Sept 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 99Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Peru

Frequently asked questions

How long did the Concepción fire last?
GWIS (Copernicus) dates it between 12 September 2016 and 14 September 2016: 3 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,163 hectares (31.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Jauja (2,273 ha, 0.5 %); Concepción (893 ha, 0.4 %); Yauyos (20 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 10.9 °C, humidity dropped to 35 % and gusts hit 44 km/h. The fire danger index (FWI) reached 5, class Low.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Peru (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 116 · 105 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Name: Jauja → Concepción.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 116 · 105.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 99 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.