Skip to content
worldfires
AU · Australia · –

Clarence Valley fire, 6 September 2019 Clarence Valley

Out · last detection 12 Sept 2019, 14:17 UTC

The fire started on 6 September 2019 in Clarence Valley, Australia, and satellites saw it burning for 7 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 11,284 hectares from heat detections, spread across a single municipality.

It is the 50th largest in New South Wales since 2016 (of 121 with a page). Number 141 in Australia in 2019, of 288.

Burnt area
11,284ha
GWIS perimeter (Copernicus)
Duration
7days
6 Sept 2019 – 12 Sept 2019
Municipalities hit
1
local government areas
Started on
6 Sept
2019
Heat detections
705
in a single hotspot: 382 MW
Danger at start
19
Moderate · FWI index
Average daily power
1.9GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 6 Sept12 Sept
12 Sept 2019

How it evolved, day by day

6 Sept 2019 · 126 MW · 20 7 Sept 2019 · 1,184 MW · 219 8 Sept 2019 · 1,282 MW · 165 9 Sept 2019 · 9,009 MW · 131 10 Sept 2019 · 934 MW · 123 11 Sept 2019 · 393 MW · 28 12 Sept 2019 · 115 MW · 19
6 Sept 9 Sept 12 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

29°high
57km/h · peak gust
20%lowest humidity

It had gone 6 days without rain (1 mm or more) when it started. Rain came after the fire: 3.1 mm on 17 Sept.

This area had burned before

3% of the perimeter overlaps earlier fires recorded since 2016: 303 ha in 2017.

How big is it?

10 km
It burned the equivalent of 7.1% of the area of London (113 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Clarence Valley where it started
    11,271 ha
    1.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area7.2 ha
Residents≈ 90

Inside the perimeter there were about 7.2 hectares of built-up land and about 90 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
6 Sept 29.4 °C 20 % 40 km/h 0.0 mm Moderate 19
7 Sept 24.2 °C 24 % 45 km/h 0.0 mm High 26
8 Sept 23.0 °C 25 % 29 km/h 0.0 mm High 24
9 Sept 20.3 °C 22 % 52 km/h 0.0 mm Very high 40
10 Sept 18.6 °C 40 % 57 km/h 0.0 mm Very high 39
11 Sept 19.0 °C 53 % 45 km/h 0.0 mm High 21
12 Sept 21.4 °C 44 % 41 km/h 0.0 mm Moderate 17
13 Sept after 23.2 °C 30 % 48 km/h 0.0 mm High 37
14 Sept after 23.6 °C 33 % 50 km/h 0.0 mm High 23
15 Sept after 22.2 °C 51 % 39 km/h 0.0 mm Moderate 20
16 Sept after 25.7 °C 37 % 28 km/h 0.0 mm Moderate 21
17 Sept after 20.7 °C 62 % 35 km/h 3.1 mm Moderate 18

Its twins: fires that started in the same weather

It started with an FWI of 18.9, a minimum humidity of 20% and 6 days without rain. Fires in the area that started in weather like this since 2016: 16.

FWI at the start 18.9
Minimum humidity 20 %
Days without rain 6
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Tenterfield fire, August 2017
8,469 ha 24 days FWI 18.9 Min. humidity 23 % 109 km away, in 2017

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

17 days
median duration
9,068 ha
median area
44 %
went past 10,000 ha
2.3 mm
rain at the end (median; 13 of 16 had it)

It burned an area similar to its twins (11,284 ha against a median of 9,068 ha) and lasted 7 days, against 17 days.

In 3 of 16, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

3.1 mmfirst rain
17 Sept5 days after it ended
57km/h · max. gust

It was considered over on 12 Sept, and on 17 Sept 3.1 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 13 of 16, with a median of 2.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 30 Aug 2019
After · 19 Sept 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 705Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Clarence Valley fire last?
GWIS (Copernicus) dates it between 6 September 2019 and 12 September 2019: 7 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 11,284 hectares (112.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Clarence Valley (11,271 ha, 1.1 %).
What was the weather like?
During the fire the temperature reached 29.4 °C, humidity dropped to 20 % and gusts hit 57 km/h. The fire danger index (FWI) reached 40, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 16. Their median duration was 17 days and their median area 9,068 ha; 44 % went past 10,000 ha. In 3 of 16, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 705 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.