Chun fire, 24 March 2026 Chun, Dok Khamtai
The fire started on 24 March 2026 in Chun, Thailand, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,332 hectares from heat detections, spread across 2 municipalities.
It is the 79th largest in Phayao Province since 2016 (of 125 with a page). Number 604 in Thailand in 2026, of 880.
The power measured by the satellite is low (14.1 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.
- Burnt area
- 1,332ha
- GWIS perimeter (Copernicus)
- Duration
- 6days
- 24 Mar 2026 – 29 Mar 2026
- Municipalities hit
- 2
- districts
- Started on
- 24 Mar
- 2026
- Heat detections
- 35
- in a single hotspot: 14 MW
- Danger at start
- 30
- High · FWI index
- Energy released
- 132MW
- sum of detected power
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 10 days without rain (1 mm or more) when it started.
This area had burned before
95% of the perimeter overlaps earlier fires recorded since 2016: 380 ha in 2017, 573 ha in 2019, 825 ha in 2020, 476 ha in 2021, 899 ha in 2023, 253 ha in 2024, 342 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 1,260 ha that had burned before.
- 673 ha Chun fire, February 2023 1,869 ha in total; the hectares shown are those it shares with this fire
- 598 ha Dok Khamtai fire, January 2020 1,373 ha in total; the hectares shown are those it shares with this fire
- 389 ha Chun fire, February 2019 2,581 ha in total; the hectares shown are those it shares with this fire
What happened to each town
-
Chun where it started920 ha reached on 25 Mar1.7 %
-
420 ha reached on 24 Mar0.6 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 24 Mar | 36.4 °C | 22 % | 23 km/h | 0.0 mm | High 30 |
| 25 Mar | 36.4 °C | 22 % | 30 km/h | 0.0 mm | High 32 |
| 26 Mar | 36.5 °C | 23 % | 23 km/h | 0.0 mm | High 30 |
| 27 Mar | 36.9 °C | 23 % | 31 km/h | 0.0 mm | High 34 |
| 28 Mar | 37.1 °C | 25 % | 33 km/h | 0.0 mm | High 35 |
| 29 Mar | 36.9 °C | 24 % | 39 km/h | 0.0 mm | Very high 38 |
| 30 Mar after | 36.4 °C | 28 % | 28 km/h | 0.0 mm | High 35 |
| 31 Mar after | 36.8 °C | 30 % | 27 km/h | 0.0 mm | High 33 |
| 1 Apr after | 36.6 °C | 34 % | 23 km/h | 0.0 mm | High 31 |
| 2 Apr after | 37.3 °C | 31 % | 28 km/h | 0.0 mm | High 33 |
| 3 Apr after | 37.4 °C | 31 % | 25 km/h | 0.0 mm | High 33 |
| 4 Apr after | 36.2 °C | 36 % | 24 km/h | 0.0 mm | High 30 |
| 5 Apr after | 37.3 °C | 35 % | 24 km/h | 0.0 mm | High 32 |
| 6 Apr after | 36.8 °C | 37 % | 24 km/h | 0.0 mm | High 31 |
| 7 Apr after | 36.7 °C | 37 % | 26 km/h | 0.0 mm | High 32 |
| 8 Apr after | 37.4 °C | 29 % | 27 km/h | 0.0 mm | High 33 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 1 April 2026 the air beside the fire reached 87 µg/m³ of PM2.5. That day averaged 59: 3.9 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 35Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Chun fire last?
- GWIS (Copernicus) dates it between 24 March 2026 and 29 March 2026: 6 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,332 hectares (13.3 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 2 municipalities: Chun (920 ha, 1.7 %); Dok Khamtai (420 ha, 0.6 %).
- What was the weather like?
- During the fire the temperature reached 37.1 °C, humidity dropped to 22 % and gusts hit 39 km/h. The fire danger index (FWI) reached 38, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Thailand (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 199 · 191
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.