Skip to content
worldfires
KH · Cambodia · –

Choam Ksant fire, 7 January 2019 Choam Ksant, Kuleaen, Trapeang Prasat

Out · last detection 25 Feb 2019, 17:58 UTC

The fire started on 7 January 2019 in Choam Ksant, Cambodia, and satellites saw it burning for 50 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,421 hectares from heat detections, spread across 3 municipalities.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

We are reviewing this page: some of its data look inconsistent (the place, the dates or the area), so treat them with caution.

Burnt area
8,421ha
GWIS perimeter (Copernicus)
Duration
50days
7 Jan 2019 – 25 Feb 2019
Municipalities hit
3
districts
Started on
7 Jan
2019
Heat detections
832
in a single hotspot: 124 MW
Danger at start
25
High · FWI index
Average daily power
143MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 7 Jan25 Feb
25 Feb 2019

How it evolved, day by day

7 Jan 2019 · 216 MW · 12 8 Jan 2019 · 278 MW · 27 10 Jan 2019 · 155 MW · 9 11 Jan 2019 · 195 MW · 22 12 Jan 2019 · 46 MW · 6 13 Jan 2019 · 33 MW · 5 14 Jan 2019 · 60 MW · 11 15 Jan 2019 · 72 MW · 7 16 Jan 2019 · 83 MW · 6 17 Jan 2019 · 75 MW · 19 18 Jan 2019 · 4 MW · 5 20 Jan 2019 · 179 MW · 16 21 Jan 2019 · 1,033 MW · 24 22 Jan 2019 · 251 MW · 20 23 Jan 2019 · 49 MW · 11 24 Jan 2019 · 113 MW · 18 25 Jan 2019 · 131 MW · 25 26 Jan 2019 · 161 MW · 10 27 Jan 2019 · 70 MW · 22 28 Jan 2019 · 134 MW · 29 29 Jan 2019 · 286 MW · 28 30 Jan 2019 · 81 MW · 21 31 Jan 2019 · 61 MW · 9 1 Feb 2019 · 119 MW · 26 2 Feb 2019 · 80 MW · 16 3 Feb 2019 · 49 MW · 9 4 Feb 2019 · 21 MW · 6 5 Feb 2019 · 3 MW · 1 6 Feb 2019 · 8 MW · 2 7 Feb 2019 · 90 MW · 13 8 Feb 2019 · 142 MW · 14 9 Feb 2019 · 8 MW · 2 10 Feb 2019 · 21 MW · 3 11 Feb 2019 · 421 MW · 53 12 Feb 2019 · 1,296 MW · 163 13 Feb 2019 · 256 MW · 42 14 Feb 2019 · 85 MW · 16 15 Feb 2019 · 84 MW · 22 16 Feb 2019 · 177 MW · 20 17 Feb 2019 · 28 MW · 12 18 Feb 2019 · 57 MW · 22 19 Feb 2019 · 22 MW · 7 20 Feb 2019 · 6 MW · 2 21 Feb 2019 · 11 MW · 2 22 Feb 2019 · 42 MW · 9 23 Feb 2019 · 40 MW · 5 24 Feb 2019 · 10 MW · 1 25 Feb 2019 · 4 MW · 2
7 Jan 18 Jan 29 Jan 12 Feb

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
36km/h · peak gust
32%lowest humidity

It had gone 8 days without rain (1 mm or more) when it started.

This area had burned before

60% of the perimeter overlaps earlier fires recorded since 2016: 5,819 ha in 2016, 2,009 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 5,012 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 5.3% of the area of London (84 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Choam Ksant where it started
    6,516 ha reached on 7 Jan
    1.7 %
  2. 5,629 ha reached on 7 Jan
    2.6 %
  3. 82 ha reached on 7 Jan
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
7 Jan 34.0 °C 38 % 33 km/h 0.0 mm High 25
8 Jan 34.6 °C 38 % 34 km/h 0.0 mm High 27
9 Jan 33.7 °C 40 % 30 km/h 0.0 mm High 27
10 Jan 33.4 °C 42 % 32 km/h 0.0 mm High 28
11 Jan 34.2 °C 39 % 30 km/h 0.0 mm High 26
12 Jan 34.0 °C 40 % 29 km/h 0.0 mm High 29
13 Jan 33.5 °C 38 % 23 km/h 0.0 mm High 25
14 Jan 33.2 °C 39 % 25 km/h 0.0 mm High 25
15 Jan 33.0 °C 40 % 26 km/h 0.0 mm High 26
16 Jan 33.0 °C 45 % 25 km/h 0.0 mm High 27
17 Jan 32.4 °C 47 % 36 km/h 0.0 mm High 30
18 Jan 32.0 °C 45 % 31 km/h 0.0 mm High 31
19 Jan 33.1 °C 42 % 24 km/h 0.0 mm High 27
20 Jan 33.0 °C 42 % 23 km/h 0.0 mm High 26
21 Jan 32.3 °C 45 % 32 km/h 0.0 mm High 28
22 Jan 32.2 °C 46 % 32 km/h 0.0 mm High 32
23 Jan 31.3 °C 42 % 30 km/h 0.0 mm High 28
24 Jan 31.6 °C 36 % 23 km/h 0.0 mm High 26
25 Jan 31.9 °C 36 % 22 km/h 0.0 mm High 28
26 Jan 31.0 °C 37 % 34 km/h 0.0 mm High 33
27 Jan 30.9 °C 42 % 33 km/h 0.0 mm High 32
28 Jan 31.5 °C 40 % 24 km/h 0.0 mm High 30
29 Jan 32.8 °C 39 % 30 km/h 0.0 mm High 31
30 Jan 33.2 °C 42 % 31 km/h 0.0 mm High 33
31 Jan 32.3 °C 44 % 21 km/h 0.0 mm High 29
1 Feb 33.2 °C 39 % 28 km/h 0.0 mm High 30
2 Feb 33.8 °C 38 % 23 km/h 0.0 mm High 31
3 Feb 34.6 °C 40 % 22 km/h 0.0 mm High 27
4 Feb 34.8 °C 40 % 21 km/h 0.0 mm High 30
5 Feb 34.9 °C 48 % 21 km/h 0.0 mm High 24
6 Feb 34.0 °C 54 % 22 km/h 0.5 mm High 23
7 Feb 35.3 °C 47 % 20 km/h 0.0 mm Moderate 20
8 Feb 36.4 °C 42 % 17 km/h 0.0 mm High 22
9 Feb 35.7 °C 47 % 20 km/h 0.0 mm High 25
10 Feb 34.5 °C 47 % 23 km/h 0.0 mm High 25
11 Feb 35.1 °C 32 % 26 km/h 0.0 mm High 32
12 Feb 34.7 °C 37 % 33 km/h 0.0 mm High 37
13 Feb 34.5 °C 37 % 26 km/h 0.0 mm High 32
14 Feb 34.7 °C 37 % 30 km/h 0.0 mm High 34
15 Feb 35.1 °C 34 % 32 km/h 0.0 mm High 37
16 Feb 35.2 °C 36 % 25 km/h 0.0 mm High 34
17 Feb 33.7 °C 41 % 22 km/h 0.0 mm High 29
18 Feb 33.3 °C 47 % 28 km/h 0.0 mm High 32
19 Feb 35.1 °C 42 % 20 km/h 0.0 mm High 28
20 Feb 34.3 °C 48 % 17 km/h 0.0 mm High 25
21 Feb 35.3 °C 45 % 17 km/h 0.0 mm High 24
22 Feb 36.2 °C 42 % 18 km/h 0.0 mm High 23
23 Feb 34.1 °C 56 % 24 km/h 0.3 mm High 23
24 Feb 35.1 °C 52 % 19 km/h 0.2 mm High 23
25 Feb 34.7 °C 45 % 24 km/h 0.0 mm High 28
26 Feb after 34.1 °C 48 % 25 km/h 0.3 mm High 28
27 Feb after 35.4 °C 37 % 27 km/h 0.0 mm High 31
28 Feb after 35.2 °C 41 % 24 km/h 0.0 mm High 30
1 Mar after 35.0 °C 46 % 18 km/h 0.0 mm High 28
2 Mar after 35.2 °C 44 % 24 km/h 0.0 mm High 28
3 Mar after 34.6 °C 53 % 24 km/h 0.1 mm High 28
4 Mar after 34.1 °C 45 % 27 km/h 0.2 mm High 31
5 Mar after 34.5 °C 49 % 22 km/h 0.0 mm High 28
6 Mar after 35.7 °C 41 % 25 km/h 0.0 mm High 32
7 Mar after 37.2 °C 35 % 19 km/h 0.0 mm High 31

Its twins: fires that started in the same weather

It started with an FWI of 25.4, a minimum humidity of 38% and 8 days without rain. Fires in the area that started in weather like this since 2016: 20.

FWI at the start 25.4
Minimum humidity 38 %
Days without rain 8
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Kampong Svay fire, April 2016
5,249 ha 23 days FWI 26.0 Min. humidity 38 % 166 km away, in 2016

First rain (1 mm or more) after it ended: 3.7 mm on 29 Apr.

What happened to them

19 days
median duration
3,070 ha
median area
100 %
went past 1,000 ha
2.2 mm
rain at the end (median; 11 of 20 had it)

It was 2.7 times larger than the median of its twins and lasted 50 days, against 19 days.

Only 1 of its 20 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 9 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
36km/h · max. gust

It was considered over on 25 Feb, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 11 of 20, with a median of 2.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 31 Dec 2018
After · 4 Mar 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 832Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Cambodia

Frequently asked questions

How long did the Choam Ksant fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 7 January 2019 to 25 February 2019 (50 days). The perimeter dates it from 14 January 2019 to 18 February 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,421 hectares (84.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Choam Ksant (6,516 ha, 1.7 %); Kuleaen (5,629 ha, 2.6 %); Trapeang Prasat (82 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 36.4 °C, humidity dropped to 32 % and gusts hit 36 km/h. The fire danger index (FWI) reached 37, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Cambodia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 20. Their median duration was 19 days and their median area 3,070 ha; 100 % went past 1,000 ha. Only 1 of its 20 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 9 of 20, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 3 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 12,152 → 8,421 ha.
  2. Last day with fire: 18 February 2019 → 25 February 2019.
  3. Start date: 14 January 2019 → 7 January 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 14 January 2019 to 18 February 2019. 832 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.