Chitambo fire, 7 October 2026 Chitambo, Lavushimanda
The fire started on 7 October 2026 in Chitambo, Zambia, and satellites saw it burning for 17 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,218 hectares from heat detections, spread across 2 municipalities.
It is the 352th largest in Central since 2016 (of 400 with a page). Number 518 in Zambia in 2026, of 604.
The power measured by the satellite is low (14.0 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.
Is it still active?
No detections since 23 Oct 2026, 11:51 UTC. That usually means no flame is visible from space any more, although hotspots may remain. Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.
- Burnt area
- 3,218ha
- GWIS perimeter (Copernicus)
- Duration
- 17days
- 7 Oct 2026 – 23 Oct 2026
- Municipalities hit
- 2
- districts
- Started on
- 7 Oct
- 2026
- Heat detections
- 72
- in a single hotspot: 14 MW
- Danger at start
- 8
- Low · FWI index
- Energy released
- 249MW
- sum of detected power
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 2 days without rain (1 mm or more) when it started.
This area had burned before
70% of the perimeter overlaps earlier fires recorded since 2016: 273 ha in 2016, 1,363 ha in 2017, 17 ha in 2018, 586 ha in 2020, 484 ha in 2022, 6 ha in 2024, 172 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 2,244 ha that had burned before.
- 172 ha Chitambo fire, September 2025 65,144 ha in total; the hectares shown are those it shares with this fire
- 17 ha Chitambo fire, September 2018 3,310 ha in total; the hectares shown are those it shares with this fire
- 6 ha Chitambo fire, September 2024 14,404 ha in total; the hectares shown are those it shares with this fire
What happened to each town
-
Chitambo where it started2,511 ha reached on 10 Oct0.2 %
-
729 ha reached on 13 Oct0.0 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 7 Oct | 31.6 °C | 29 % | 31 km/h | 2.3 mm | Low 8 |
| 8 Oct | 30.9 °C | 31 % | 41 km/h | 1.7 mm | Low 11 |
| 9 Oct | 30.4 °C | 35 % | 42 km/h | 0.4 mm | Moderate 16 |
| 10 Oct | 30.6 °C | 30 % | 41 km/h | 0.2 mm | Moderate 19 |
| 11 Oct | 29.4 °C | 34 % | 42 km/h | 0.4 mm | Moderate 20 |
| 12 Oct | 30.6 °C | 27 % | 38 km/h | 0.0 mm | Moderate 21 |
| 13 Oct | 31.1 °C | 24 % | 37 km/h | 0.0 mm | High 23 |
| 14 Oct | 30.8 °C | 22 % | 44 km/h | 0.0 mm | High 27 |
| 15 Oct | 30.9 °C | 21 % | 48 km/h | 0.0 mm | High 28 |
| 16 Oct | 30.6 °C | 22 % | 48 km/h | 0.0 mm | High 29 |
| 17 Oct | 30.2 °C | 23 % | 40 km/h | 0.0 mm | High 28 |
| 18 Oct | 31.1 °C | 21 % | 38 km/h | 0.0 mm | High 28 |
| 19 Oct | 32.4 °C | 24 % | 31 km/h | 0.0 mm | High 28 |
| 20 Oct | 34.5 °C | 17 % | 39 km/h | 0.0 mm | High 33 |
| 21 Oct | 34.7 °C | 18 % | 41 km/h | 0.0 mm | High 35 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 20 October 2026 the air beside the fire reached 62 µg/m³ of PM2.5. That day averaged 42: 2.8 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 72Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 46,195 haChitambo29 August 2026 · 31 days · 21 km away
- 21,401 haChitambo6 September 2023 · 8 days · 22 km away
- 25,336 haChitambo7 September 2020 · 9 days · 24 km away
- 25,250 haChitambo8 September 2018 · 13 days · 27 km away
- 65,144 haChitambo1 September 2025 · 20 days · 28 km away
- 39,948 haChitamboSeptember 2021 · 14 days · 34 km away
Frequently asked questions
- How long did the Chitambo fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 7 October 2026 to 23 October 2026 (17 days). The perimeter dates it from 7 October 2026 to 21 October 2026.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,218 hectares (32.2 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 2 municipalities: Chitambo (2,511 ha, 0.2 %); Lavushimanda (729 ha, 0.0 %).
- Is the Chitambo fire still active?
- No fire detections since 23 Oct 2026, 11:51 UTC. A lack of detections is not an official extinction.
- What was the weather like?
- During the fire the temperature reached 34.5 °C, humidity dropped to 17 % and gusts hit 48 km/h. The fire danger index (FWI) reached 33, class High.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Zambia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.