Skip to content
worldfires
US · United States · –

Chimney Creek Fire, August 2019 Garza

Out · last detection 10 Aug 2019, 20:31 UTC

The fire started on 9 August 2019 in Garza, United States, and satellites saw it burning for 2 days. United States agencies (MTBS / NIFC) mapped an official burnt perimeter of 788 hectares, spread across a single county.

It is the 211th largest in Texas since 2016 (of 327 with a page). Number 247 in United States in 2019, of 367.

Burnt area
788ha
official perimeter (MTBS / NIFC)
Duration
≈ 2days
9 Aug 2019 – 10 Aug 2019
Counties hit
1
counties
Started on
9 Aug
2019
Heat detections
19
in a single hotspot: 106 MW
Danger at start
53
Extreme · FWI index
Average daily power
220MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 9 Aug10 Aug
10 Aug 2019

How it evolved, day by day

9 Aug 2019 · 355 MW · 7 10 Aug 2019 · 86 MW · 12
9 Aug 10 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
36km/h · peak gust
25%lowest humidity

It had gone 29 days without rain (1 mm or more) when it started. Rain came after the fire: 1.1 mm on 17 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.5% of the area of London (7.9 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each county

  1. Garza where it started
    788 ha reached on 9 Aug
    0.3 %

Burnt area inside each county, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 36 % of the area in United States

Day High Min. humidity Peak gust Rain Danger (FWI)
9 Aug 38.2 °C 28 % 36 km/h 0.0 mm Extreme 53
10 Aug 38.4 °C 25 % 36 km/h 0.0 mm Extreme 50
11 Aug after 39.3 °C 20 % 40 km/h 0.0 mm Extreme 60
12 Aug after 39.0 °C 29 % 41 km/h 0.0 mm Extreme 53
13 Aug after 37.7 °C 32 % 50 km/h 0.7 mm Very high 48
14 Aug after 35.2 °C 33 % 34 km/h 0.0 mm High 38
15 Aug after 36.7 °C 27 % 24 km/h 0.1 mm High 34
16 Aug after 39.8 °C 20 % 39 km/h 0.5 mm Extreme 62
17 Aug after 39.8 °C 21 % 49 km/h 1.1 mm Very extreme 74

Its twins: fires that started in the same weather

It started with an FWI of 52.9, a minimum humidity of 28% and 29 days without rain. Fires in the area that started in weather like this since 2016: 22.

FWI at the start 52.9
Minimum humidity 28 %
Days without rain 29
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Cronton Fire, August 2016
1,006 ha 1 day FWI 50.4 Min. humidity 27 % 56 km away, in 2016

First rain (1 mm or more) after it ended: 1.3 mm on 10 Aug.

What happened to them

1 day
median duration
961 ha
median area
50 %
went past 1,000 ha
2.6 mm
rain at the end (median; 10 of 22 had it)

It burned an area similar to its twins (788 ha against a median of 961 ha) and lasted 2 days, against 1 day.

In 12 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.1 mmfirst rain
17 Aug7 days after it ended
36km/h · max. gust

It was considered over on 10 Aug, and on 17 Aug 1.1 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 10 of 22, with a median of 2.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 2 Aug 2019
After · 17 Aug 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 19Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in United States

Frequently asked questions

How long did the Chimney Creek Fire last?
The official perimeter only gives the start date (9 August 2019). The end comes from the heat detections inside the perimeter: it burned until 10 August 2019 (2 days from 9 August 2019), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The official perimeter published by United States agencies (MTBS / NIFC) is 788 hectares (7.9 km²). Other tallies, such as daily incident reports, may give slightly different figures.
Which counties burned?
The fire only entered Garza (788 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 38.4 °C, humidity dropped to 25 % and gusts hit 36 km/h. The fire danger index (FWI) reached 53, class Extreme.
Where does this data come from?
From the official burnt perimeter of United States agencies (MTBS / NIFC, public domain), NASA FIRMS VIIRS hotspots and the administrative boundaries of United States. It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 22. Their median duration was 1 day and their median area 961 ha; 50 % went past 1,000 ha. In 12 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: MTBS (US Geological Survey and US Forest Service), official.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 19 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official and in the public domain. For past years it comes from MTBS (Monitoring Trends in Burn Severity), run by the U.S. Geological Survey and the USDA Forest Service, which map it on Landsat and Sentinel-2 imagery. For the current and last year it comes from WFIGS at the National Interagency Fire Center (NIFC): incident perimeters mapped by fire crews, aircraft and imagery. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. County boundaries come from geoBoundaries ADM2 (Public Domain). The area per county is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.