Skip to content
worldfires
AU · Australia · –

Charters Towers fire, 14 November 2020 Charters Towers

Out · last detection 4 Dec 2020, 04:24 UTC

The fire started on 14 November 2020 in Charters Towers, Australia, and satellites saw it burning for 21 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 17,268 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
17,268ha
GWIS perimeter (Copernicus)
Duration
21days
14 Nov 2020 – 4 Dec 2020
Municipalities hit
1
local government areas
Started on
14 Nov
2020
Heat detections
997
in a single hotspot: 62 MW
Danger at start
20
Moderate · FWI index
Average daily power
317MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Nov4 Dec
4 Dec 2020

How it evolved, day by day

14 Nov 2020 · 16 MW · 4 15 Nov 2020 · 435 MW · 34 16 Nov 2020 · 65 MW · 14 17 Nov 2020 · 158 MW · 38 18 Nov 2020 · 276 MW · 50 19 Nov 2020 · 489 MW · 109 20 Nov 2020 · 861 MW · 133 21 Nov 2020 · 508 MW · 72 22 Nov 2020 · 659 MW · 84 23 Nov 2020 · 198 MW · 64 24 Nov 2020 · 1,145 MW · 101 25 Nov 2020 · 3 MW · 4 26 Nov 2020 · 45 MW · 18 27 Nov 2020 · 211 MW · 41 28 Nov 2020 · 165 MW · 46 29 Nov 2020 · 743 MW · 83 30 Nov 2020 · 292 MW · 46 1 Dec 2020 · 171 MW · 15 2 Dec 2020 · 102 MW · 17 3 Dec 2020 · 102 MW · 20 4 Dec 2020 · 22 MW · 4
14 Nov 19 Nov 24 Nov 29 Nov 4 Dec

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
53km/h · peak gust
17%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 1.0 mm on 8 Dec.

This area had burned before

55% of the perimeter overlaps earlier fires recorded since 2016: 9,466 ha in 2017.

How big is it?

10 km
It burned the equivalent of 11% of the area of London (173 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Charters Towers where it started
    17,360 ha reached on 14 Nov
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Nov 35.5 °C 24 % 23 km/h 0.0 mm Moderate 20
15 Nov 36.3 °C 21 % 32 km/h 0.0 mm High 36
16 Nov 35.9 °C 19 % 38 km/h 0.0 mm Very high 44
17 Nov 34.9 °C 21 % 44 km/h 0.0 mm Extreme 55
18 Nov 33.3 °C 19 % 50 km/h 0.0 mm Extreme 66
19 Nov 31.7 °C 28 % 53 km/h 0.0 mm Extreme 58
20 Nov 31.1 °C 28 % 50 km/h 0.0 mm Extreme 59
21 Nov 31.7 °C 23 % 46 km/h 0.0 mm Extreme 54
22 Nov 31.8 °C 28 % 43 km/h 0.0 mm Extreme 53
23 Nov 33.8 °C 21 % 35 km/h 0.0 mm Very high 43
24 Nov 35.6 °C 17 % 36 km/h 0.0 mm Very high 41
25 Nov 33.1 °C 24 % 40 km/h 0.9 mm High 37
26 Nov 34.7 °C 27 % 41 km/h 0.2 mm High 35
27 Nov 33.9 °C 27 % 43 km/h 0.0 mm Very high 46
28 Nov 32.0 °C 26 % 40 km/h 0.0 mm Very high 45
29 Nov 33.8 °C 26 % 37 km/h 0.0 mm Very high 38
30 Nov 34.8 °C 18 % 31 km/h 0.0 mm Very high 43
1 Dec 35.6 °C 17 % 32 km/h 0.0 mm Very high 43
2 Dec 35.5 °C 24 % 43 km/h 0.0 mm Very high 50
3 Dec 33.6 °C 27 % 46 km/h 0.0 mm Extreme 59
4 Dec 33.0 °C 29 % 39 km/h 0.0 mm Very high 43
5 Dec after 36.1 °C 16 % 30 km/h 0.0 mm Very high 42
6 Dec after 38.7 °C 16 % 26 km/h 0.0 mm Very high 41
7 Dec after 38.0 °C 20 % 31 km/h 0.0 mm High 37
8 Dec after 36.2 °C 27 % 39 km/h 1.0 mm Very high 49

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Nov 2020
After · 11 Dec 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 997Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Charters Towers fire last?
GWIS (Copernicus) dates it between 14 November 2020 and 4 December 2020: 21 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 17,268 hectares (172.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Charters Towers (17,360 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 36.3 °C, humidity dropped to 17 % and gusts hit 53 km/h. The fire danger index (FWI) reached 66, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 997 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.