Skip to content
worldfires
IN · India · –

Chandrapur fire, March 2018 Chandrapur, Sindewahi

Out · last measured on 25 Mar 2018

The fire started on 21 March 2018 in Chandrapur, India, and satellites saw it burning for 5 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,370 hectares from heat detections, spread across 2 municipalities.

It is the 8th largest in Mahārāshtra since 2016 (of 14 with a page). Number 6 in India in 2018, of 11.

Compare with…

Suggestions: Orchha · 2016Orchha · 2016

We have the GWIS perimeter for this fire, but the VIIRS sensors did not capture it in enough detail: no day-by-day evolution, but the split by municipality is there.

Burnt area
6,370ha
GWIS perimeter (Copernicus)
Duration
5days
21 Mar 2018 – 25 Mar 2018
Municipalities hit
2
subdistricts
Started on
21 Mar
2018
Danger at start
33
High · FWI index

Where it burned

The weather it burned in

37°high
28km/h · peak gust
19%lowest humidity

It had gone 4 days without rain (1 mm or more) when it started. Rain came after the fire: 2.8 mm on 1 Apr.

This area had burned before

49% of the perimeter overlaps earlier fires recorded since 2016: 2,071 ha in 2016, 1,841 ha in 2017. Part of it burned more than once, so the yearly figures add up to more than the 3,151 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 4% of the area of London (64 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Chandrapur where it started
    3,585 ha
    3.0 %
  2. 2,818 ha
    3.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
21 Mar 36.0 °C 33 % 28 km/h 0.0 mm High 33
22 Mar 36.6 °C 20 % 27 km/h 0.0 mm High 38
23 Mar 36.6 °C 20 % 26 km/h 0.0 mm Very high 39
24 Mar 37.4 °C 19 % 28 km/h 0.0 mm Very high 41
25 Mar 37.0 °C 21 % 28 km/h 0.0 mm Very high 43
26 Mar after 37.9 °C 18 % 23 km/h 0.0 mm Very high 40
27 Mar after 37.8 °C 18 % 20 km/h 0.0 mm Very high 39
28 Mar after 38.5 °C 20 % 22 km/h 0.0 mm Very high 45
29 Mar after 39.2 °C 17 % 21 km/h 0.0 mm Very high 40
30 Mar after 39.3 °C 19 % 20 km/h 0.0 mm Very high 40
31 Mar after 38.9 °C 25 % 34 km/h 0.0 mm Very high 41
1 Apr after 38.4 °C 30 % 36 km/h 2.8 mm Very high 42

Its twins: fires that started in the same weather

It started with an FWI of 32.9, a minimum humidity of 33% and 4 days without rain. Fires in the area that started in weather like this since 2016: 12.

FWI at the start 32.9
Minimum humidity 33 %
Days without rain 4
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Orchha fire, April 2016
8,803 ha 15 days FWI 34.9 Min. humidity 30 % 179 km away, in 2016

First rain (1 mm or more) after it ended: 2.2 mm on 26 Apr.

What happened to them

Fires in the area that started in similar weather: 12. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.8 mmfirst rain
1 Apr7 days after it ended
28km/h · max. gust

It was considered over on 25 Mar, and on 1 Apr 2.8 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 14 Mar 2018
After · 1 Apr 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Frequently asked questions

How long did the Chandrapur fire last?
GWIS (Copernicus) dates it between 21 March 2018 and 25 March 2018: 5 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,370 hectares (63.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Chandrapur (3,585 ha, 3.0 %); Sindewahi (2,818 ha, 3.6 %).
What was the weather like?
During the fire the temperature reached 37.4 °C, humidity dropped to 19 % and gusts hit 28 km/h. The fire danger index (FWI) reached 43, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of India (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.