Skip to content
worldfires
UK · United Kingdom · –

Ceredigion fire, 22 March 2020 Ceredigion, Carmarthenshire

Out · last detection 27 Mar 2020, 13:37 UTC

The fire started on 22 March 2020 in Ceredigion, United Kingdom, and satellites saw it burning for 6 days. Copernicus mapped a burnt perimeter of 2,246 hectares from satellite imagery, spread across 2 municipalities.

It is the 3th largest in Wales since 2016 (of 25 with a page). The largest in United Kingdom in 2020, of 16.

Burnt area
2,246ha
Copernicus perimeter
Duration
6days
22 Mar 2020 – 27 Mar 2020
Municipalities hit
2
districts
Started on
22 Mar
2020
Heat detections
60
in a single hotspot: 36 MW
Danger at start
1
Very low · FWI index
Average daily power
92MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 22 Mar27 Mar
27 Mar 2020

How it evolved, day by day

22 Mar 2020 · 91 MW · 6 24 Mar 2020 · 5 MW · 3 25 Mar 2020 · 164 MW · 14 26 Mar 2020 · 115 MW · 14 27 Mar 2020 · 83 MW · 23
22 Mar 24 Mar 25 Mar 26 Mar 27 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

15°high
50km/h · peak gust
31%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started. Rain came after the fire: 1.0 mm on 5 Apr.

This area had burned before

43% of the perimeter overlaps earlier fires recorded since 2016: 976 ha in 2019.

How big is it?

10 km
It burned the equivalent of 1.4% of the area of London (22 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Ceredigion where it started
    2,211 ha reached on 22 Mar
    1.2 %
  2. 25 ha reached on 22 Mar
    0.0 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land99 %
  • Coniferous forest0.9 %

Protected area affected (EFFIS layer): 80 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
22 Mar 9.2 °C 52 % 41 km/h 0.0 mm Very low 1
23 Mar 11.0 °C 49 % 37 km/h 0.0 mm Very low 1
24 Mar 14.6 °C 59 % 50 km/h 0.0 mm Very low 2
25 Mar 15.0 °C 38 % 20 km/h 0.0 mm Very low 2
26 Mar 12.0 °C 31 % 32 km/h 0.0 mm Low 6
27 Mar 10.0 °C 46 % 39 km/h 0.0 mm Low 5
28 Mar after 8.3 °C 59 % 57 km/h 0.0 mm Low 8
29 Mar after 5.6 °C 48 % 59 km/h 0.0 mm Low 8
30 Mar after 7.4 °C 59 % 44 km/h 0.2 mm Very low 5
31 Mar after 8.0 °C 57 % 48 km/h 0.0 mm Very low 5
1 Apr after 6.5 °C 62 % 36 km/h 0.1 mm Very low 4
2 Apr after 9.1 °C 77 % 52 km/h 0.7 mm Very low 4
3 Apr after 9.6 °C 63 % 33 km/h 0.0 mm Very low 2
4 Apr after 11.9 °C 56 % 47 km/h 0.0 mm Very low 4
5 Apr after 16.7 °C 52 % 61 km/h 1.0 mm Low 10

Its twins: fires that started in the same weather

It started with an FWI of 0.7, a minimum humidity of 52% and 2 days without rain. Fires in the area that started in weather like this since 2017: 17.

FWI at the start 0.7
Minimum humidity 52 %
Days without rain 2
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Powys fire, April 2022
127 ha 1 day FWI 2.1 Min. humidity 55 % 41 km away, in 2022

First rain (1 mm or more) after it ended: 7.4 mm on 1 May.

What happened to them

2 days
median duration
180 ha
median area
18 %
went past 1,000 ha
6.3 mm
rain at the end (median; 15 of 17 had it)

It was 12.5 times larger than the median of its twins and lasted 6 days, against 2 days.

Only 1 of its 17 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.0 mmfirst rain
5 Apr9 days after it ended
50km/h · max. gust

It was considered over on 27 Mar, and on 5 Apr 1.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 15 of 17, with a median of 6.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2017.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 15 Mar 2020
After · 3 Apr 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 26 March 2020 the air beside the fire reached 52 µg/m³ of PM2.5. That day averaged 28: 1.9 times the WHO daily guideline (15).

PM2.5 peak52 µg/m³
Days over the guideline4 days
PM1055 µg/m³
20 Mar23 Mar26 Mar29 Mar
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 60Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in United Kingdom

Frequently asked questions

How long did the Ceredigion fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 22 March 2020 to 27 March 2020 (6 days). The perimeter dates it from 24 March 2020 to 27 March 2020.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 2,246 hectares (22.5 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Ceredigion (2,211 ha, 1.2 %); Carmarthenshire (25 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 15.0 °C, humidity dropped to 31 % and gusts hit 50 km/h. The fire danger index (FWI) reached 6, class Low.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of United Kingdom (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2017 with a similar FWI, humidity and dry spell: 17. Their median duration was 2 days and their median area 180 ha; 18 % went past 1,000 ha. Only 1 of its 17 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 999 · 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 999 · 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery; 3 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 24 March 2020 to 27 March 2020. 60 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Government Licence v3.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.