Skip to content
worldfires
AU · Australia · –

Central Desert fire, 22 October 2023 Central Desert

Out · last detection 24 Oct 2023, 05:03 UTC

The fire started on 22 October 2023 in Central Desert, Australia, and satellites saw it burning for 3 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 22,540 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
22,540ha
GWIS perimeter (Copernicus)
Duration
3days
22 Oct 2023 – 24 Oct 2023
Municipalities hit
1
local government areas
Started on
22 Oct
2023
Heat detections
686
in a single hotspot: 310 MW
Danger at start
82
Very extreme · FWI index
Average daily power
6.1GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 22 Oct24 Oct
24 Oct 2023

How it evolved, day by day

22 Oct 2023 · 12,076 MW · 485 23 Oct 2023 · 6,092 MW · 190 24 Oct 2023 · 56 MW · 11
22 Oct 23 Oct 24 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
56km/h · peak gust
3%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

9% of the perimeter overlaps earlier fires recorded since 2016: 988 ha in 2017, 159 ha in 2018, 961 ha in 2019.

How big is it?

10 km
It burned the equivalent of 14% of the area of London (225 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Central Desert where it started
    22,623 ha reached on 22 Oct
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 20 % of the area in Australia Very dry air: 29 % of the area in Australia 60 days without rain: 34 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
22 Oct 37.8 °C 8 % 52 km/h 0.0 mm Very extreme 82
23 Oct 38.4 °C 12 % 56 km/h 0.0 mm Very extreme 93
24 Oct 39.0 °C 16 % 41 km/h 0.1 mm Extreme 68
25 Oct after 36.5 °C 14 % 47 km/h 0.0 mm Very extreme 77
26 Oct after 33.2 °C 11 % 55 km/h 0.0 mm Very extreme 88
27 Oct after 33.7 °C 7 % 50 km/h 0.0 mm Very extreme 82
28 Oct after 35.0 °C 4 % 44 km/h 0.0 mm Very extreme 77
29 Oct after 37.0 °C 3 % 39 km/h 0.0 mm Very extreme 72
30 Oct after 39.7 °C 5 % 37 km/h 0.0 mm Very extreme 70
31 Oct after 40.3 °C 9 % 37 km/h 0.0 mm Very extreme 79
1 Nov after 40.3 °C 15 % 39 km/h 0.0 mm Extreme 64
2 Nov after 37.8 °C 19 % 45 km/h 0.6 mm Extreme 65
3 Nov after 37.4 °C 20 % 32 km/h 0.9 mm Extreme 50
4 Nov after 36.9 °C 13 % 35 km/h 0.0 mm Extreme 59
5 Nov after 38.5 °C 9 % 50 km/h 0.0 mm Very extreme 80
6 Nov after 38.9 °C 8 % 45 km/h 0.0 mm Very extreme 81
7 Nov after 40.5 °C 9 % 35 km/h 0.1 mm Very extreme 70
8 Nov after 35.7 °C 24 % 47 km/h 0.4 mm Extreme 70
9 Nov after 37.6 °C 19 % 35 km/h 0.5 mm Extreme 51
10 Nov after 40.4 °C 12 % 48 km/h 0.0 mm Very extreme 78

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 15 Oct 2023
After · 31 Oct 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 20 October 2023 the air beside the fire reached 158 µg/m³ of PM2.5. That day averaged 52: 3.4 times the WHO daily guideline (15).

PM2.5 peak158 µg/m³
Days over the guideline8 days
PM10226 µg/m³
Optical depth2.26
20 Oct22 Oct24 Oct26 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 686Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Central Desert fire last?
GWIS (Copernicus) dates it between 22 October 2023 and 24 October 2023: 3 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 22,540 hectares (225.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Central Desert (22,623 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 40.3 °C, humidity dropped to 3 % and gusts hit 56 km/h. The fire danger index (FWI) reached 93, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 686 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.