Skip to content
worldfires
AU · Australia · –

Central Desert fire, 28 September 2023 Central Desert

Out · last detection 8 Oct 2023, 05:02 UTC

The fire started on 28 September 2023 in Central Desert, Australia, and satellites saw it burning for 11 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 33,843 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
33,843ha
GWIS perimeter (Copernicus)
Duration
11days
28 Sept 2023 – 8 Oct 2023
Municipalities hit
1
local government areas
Started on
28 Sept
2023
Heat detections
1,314
in a single hotspot: 265 MW
Danger at start
79
Very extreme · FWI index
Average daily power
1.6GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 28 Sept8 Oct
8 Oct 2023

How it evolved, day by day

28 Sept 2023 · 3,282 MW · 116 29 Sept 2023 · 112 MW · 6 30 Sept 2023 · 3,556 MW · 308 1 Oct 2023 · 5,854 MW · 365 2 Oct 2023 · 1,804 MW · 185 3 Oct 2023 · 575 MW · 129 4 Oct 2023 · 1,632 MW · 106 5 Oct 2023 · 694 MW · 47 6 Oct 2023 · 441 MW · 49 7 Oct 2023 · 2 MW · 2 8 Oct 2023 · 10 MW · 1
28 Sept 1 Oct 4 Oct 7 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
59km/h · peak gust
9%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

7% of the perimeter overlaps earlier fires recorded since 2016: 2,244 ha in 2017, 105 ha in 2019, 67 ha in 2022.

How big is it?

10 km
It burned the equivalent of 21% of the area of London (338 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Central Desert where it started
    34,231 ha reached on 28 Sept
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Strong wind: 39 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
28 Sept 32.6 °C 15 % 57 km/h 0.0 mm Very extreme 79
29 Sept 32.6 °C 15 % 50 km/h 0.0 mm Very extreme 71
30 Sept 33.6 °C 14 % 36 km/h 0.0 mm Extreme 54
1 Oct 35.9 °C 12 % 38 km/h 0.0 mm Extreme 57
2 Oct 36.5 °C 14 % 53 km/h 0.0 mm Very extreme 76
3 Oct 37.1 °C 12 % 45 km/h 0.0 mm Very extreme 75
4 Oct 28.6 °C 9 % 59 km/h 0.0 mm Very extreme 84
5 Oct 29.0 °C 10 % 50 km/h 0.0 mm Very extreme 74
6 Oct 29.0 °C 10 % 50 km/h 0.0 mm Very extreme 76
7 Oct 28.7 °C 11 % 50 km/h 0.0 mm Very extreme 75
8 Oct 29.4 °C 13 % 50 km/h 0.0 mm Very extreme 71
9 Oct after 30.8 °C 8 % 44 km/h 0.0 mm Extreme 67
10 Oct after 31.3 °C 6 % 51 km/h 0.0 mm Very extreme 75
11 Oct after 32.6 °C 8 % 40 km/h 0.0 mm Extreme 65
12 Oct after 35.2 °C 8 % 39 km/h 0.0 mm Very extreme 71
13 Oct after 33.7 °C 10 % 54 km/h 0.0 mm Very extreme 82
14 Oct after 31.4 °C 6 % 53 km/h 0.0 mm Very extreme 80
15 Oct after 31.4 °C 6 % 44 km/h 0.0 mm Extreme 69
16 Oct after 32.4 °C 10 % 53 km/h 0.0 mm Very extreme 81
17 Oct after 31.0 °C 8 % 50 km/h 0.0 mm Very extreme 77
18 Oct after 32.7 °C 7 % 39 km/h 0.0 mm Extreme 66

Its twins: fires that started in the same weather

It started with an FWI of 79.4, a minimum humidity of 15% and more than two months without rain. Fires in the area that started in weather like this since 2022: 3.

FWI at the start 79.4
Minimum humidity 15 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

MacDonnell fire, October 2023
8,693 ha 5 days FWI 68.8 Min. humidity 15 % 231 km away, in 2023

First rain (1 mm or more) after it ended: 2.2 mm on 2 Nov.

What happened to them

Fires in the area that started in similar weather: 3. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
59km/h · max. gust

It was considered over on 8 Oct, and not even 1 mm fell in the following ten days: it went out without rain.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2022.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 21 Sept 2023
After · 15 Oct 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 30 September 2023 the air beside the fire reached 81 µg/m³ of PM2.5. That day averaged 37: 2.5 times the WHO daily guideline (15).

PM2.5 peak81 µg/m³
Days over the guideline2 days
PM10116 µg/m³
Optical depth1.66
26 Sept29 Sept2 Oct5 Oct8 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,314Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Central Desert fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 28 September 2023 to 8 October 2023 (11 days). The perimeter dates it from 28 September 2023 to 6 October 2023.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 33,843 hectares (338.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Central Desert (34,231 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 37.1 °C, humidity dropped to 9 % and gusts hit 59 km/h. The fire danger index (FWI) reached 84, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 6 October 2023 → 8 October 2023.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 28 September 2023 to 6 October 2023. 1,314 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.