Skip to content
worldfires
ZW · Zimbabwe · –

Centenary/ Muzarabani fire, 23 August 2026 Centenary/ Muzarabani

Out · last detection 27 Aug 2026, 12:40 UTC

The fire started on 23 August 2026 in Centenary/ Muzarabani, Zimbabwe, and satellites saw it burning for 5 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,050 hectares from heat detections, spread across a single municipality.

Number 364 in Zimbabwe in 2026, of 421.

GWIS near-real-time perimeter, from the layer that changed in August 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

The power measured by the satellite is low (23.7 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
1,050ha
GWIS perimeter (Copernicus)
Duration
5days
23 Aug 2026 – 27 Aug 2026
Municipalities hit
1
districts
Started on
23 Aug
2026
Heat detections
23
in a single hotspot: 24 MW
Danger at start
37
High · FWI index
Average daily power
110MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 23 Aug27 Aug
27 Aug 2026

How it evolved, day by day

26 Aug 2026 · 109 MW · 12 27 Aug 2026 · 112 MW · 11
26 Aug 27 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

28°high
45km/h · peak gust
24%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.7% of the area of London (10 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Centenary/ Muzarabani where it started
    1,057 ha
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area9.1 ha
Residents≈ 1,100

Inside the perimeter there were about 9.1 hectares of built-up land and about 1,100 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 63 % of the area in Zimbabwe

Day High Min. humidity Peak gust Rain Danger (FWI)
23 Aug 27.9 °C 25 % 31 km/h 0.0 mm High 37
24 Aug 25.2 °C 35 % 41 km/h 0.0 mm Very high 42
25 Aug 25.5 °C 24 % 31 km/h 0.0 mm High 36
26 Aug 26.9 °C 25 % 32 km/h 0.0 mm Very high 41
27 Aug 23.7 °C 27 % 45 km/h 0.0 mm Extreme 51
28 Aug after 22.7 °C 33 % 48 km/h 0.0 mm Very high 49
29 Aug after 22.1 °C 47 % 38 km/h 0.1 mm High 32
30 Aug after 25.8 °C 37 % 38 km/h 0.0 mm High 30
31 Aug after 27.3 °C 34 % 40 km/h 0.0 mm Very high 40
1 Sept after 27.3 °C 31 % 43 km/h 0.0 mm Very high 44
2 Sept after 26.0 °C 34 % 44 km/h 0.0 mm Very high 43
3 Sept after 27.7 °C 31 % 41 km/h 0.0 mm Very high 44
4 Sept after 29.3 °C 29 % 35 km/h 0.0 mm Very high 44
5 Sept after 26.9 °C 41 % 45 km/h 0.0 mm Very high 49
6 Sept after 24.2 °C 51 % 45 km/h 0.0 mm Very high 38

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 16 Aug 2026
After · 3 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 25 August 2026 the air beside the fire reached 51 µg/m³ of PM2.5. That day averaged 30: 2.0 times the WHO daily guideline (15).

PM2.5 peak51 µg/m³
Days over the guideline6 days
PM1053 µg/m³
Optical depth0.42
21 Aug23 Aug25 Aug27 Aug29 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 23Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Zimbabwe

Frequently asked questions

How long did the Centenary/ Muzarabani fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 23 August 2026 to 27 August 2026 (5 days). The perimeter dates it from 26 August 2026 to 27 August 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,050 hectares (10.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Centenary/ Muzarabani (1,057 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 27.9 °C, humidity dropped to 24 % and gusts hit 45 km/h. The fire danger index (FWI) reached 51, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Zimbabwe (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 26 August 2026 to 27 August 2026. 23 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.