Skip to content
worldfires
ES · Spain ·

Cangas del Narcea fire, 4 February 2020 Cangas del Narcea, Allande

Out · last detection 4 Feb 2020, 01:45 UTC

The fire started on 4 February 2020 in Cangas del Narcea, Spain, and satellites saw it burning for 1 day. Copernicus mapped a burnt perimeter of 107 hectares from satellite imagery, spread across 2 municipalities.

It is the 198th largest in Asturias since 2016 (of 225 with a page). Number 83 in Spain in 2020, of 89.

The power measured by the satellite is low (3.8 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
107ha
Copernicus perimeter
Duration
1day
4 Feb 2020 – 4 Feb 2020
Municipalities hit
2
municipalities
Started on
4 Feb
2020
Heat detections
1
in a single hotspot: 4 MW
Danger at start
0
Very low · FWI index
Average daily power
4MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 4 Feb4 Feb

How it evolved, day by day

4 Feb 2020 · 4 MW · 1

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

11°high
35km/h · peak gust
74%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started. Rain came after the fire: 6.5 mm on 8 Feb.

This area had burned before

2% of the perimeter overlaps earlier fires recorded since 2016: 2 ha in 2019.

What happened to each town

  1. Cangas del Narcea 11,282 inhabitants · 12.8 km from the centre where it started
    84 ha reached on 4 Feb
    0.1 %
  2. Allande 1,506 inhabitants · 10.2 km from the centre
    23 ha
    0.1 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land89 %
  • Broadleaved forest11 %

Natura 2000 protected area affected: 100 %

Natura 2000 sites (European Environment Agency, 2024 release) crossed by the perimeter.

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

Official record

According to EGIF (MITECO), this fire started on 3 February 2020 and burned 80 ha (the satellite measured 107 ha). The two figures differ a lot, so these may not be exactly the same fire: take them as nearby records.

MITECO, Estadística General de Incendios Forestales (EGIF). This is the agency’s consolidated statistic: it measures the area in its own way, which is why it can differ from the satellite.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
4 Feb 11.0 °C 74 % 35 km/h 0.1 mm Very low 0
5 Feb after 11.1 °C 51 % 27 km/h 0.0 mm Very low 1
6 Feb after 13.7 °C 41 % 26 km/h 0.0 mm Very low 1
7 Feb after 12.2 °C 58 % 45 km/h 0.0 mm Very low 2
8 Feb after 9.5 °C 58 % 40 km/h 6.5 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 0.5, a minimum humidity of 74% and 2 days without rain. Fires in the area that started in weather like this since 2016: 17.

FWI at the start 0.5
Minimum humidity 74 %
Days without rain 2
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Cangas del Narcea fire, February 2024
106 ha 1 day FWI 0.1 Min. humidity 75 % 30 km away, in 2024

First rain (1 mm or more) after it ended: 10.1 mm on 10 Feb.

What happened to them

1 day
median duration
124 ha
median area
0 %
went past 1,000 ha
8.3 mm
rain at the end (median; 15 of 17 had it)

It burned an area similar to its twins (107 ha against a median of 124 ha) and lasted 1 day, against 1 day.

In 2 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 8.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

6.5 mmfirst rain
8 Feb4 days after it ended
35km/h · max. gust

It was considered over on 4 Feb, and on 8 Feb 6.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 15 of 17, with a median of 8.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 28 Jan 2020
After · 11 Feb 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 2 February 2020 the air beside the fire reached 24 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak24 µg/m³
Days over the guideline0 days
PM1039 µg/m³
2 Feb4 Feb6 Feb
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Spain

Frequently asked questions

How long did the Cangas del Narcea fire last?
Copernicus dates it between 4 February 2020 and 4 February 2020: 1 day between the first and last image with fire.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 107 hectares (1.1 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Cangas del Narcea (84 ha, 0.1 %); Allande (23 ha, 0.1 %).
Did the fire reach a town?
The fire came within 10.2 km of the centre of Allande, the closest of the areas it touched. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 11.0 °C, humidity dropped to 74 % and gusts hit 35 km/h. The fire danger index (FWI) reached 0, class Very low.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Spain (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 17. Their median duration was 1 day and their median area 124 ha; 0 % went past 1,000 ha. In 2 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 8.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. One Suomi-NPP VIIRS detection on those dates.
  • Compared with EGIF (MITECO): 80 official ha against 107 ha of perimeter; similar, but with reservations.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.