Skip to content
worldfires
ES · Spain ·

Cangas del Narcea fire, 25 February 2019 Cangas del Narcea

Out · last detection 25 Feb 2019, 12:20 UTC

The fire started on 25 February 2019 in Cangas del Narcea, Spain, and satellites saw it burning for 1 day. Copernicus mapped a burnt perimeter of 104 hectares from satellite imagery, spread across a single municipality. According to EGIF (MITECO), the largest of the 2 recorded fires was detected on 24 February 2019 at 20:26 and declared extinguished on 25 February 2019.

It is the 213th largest in Asturias since 2016 (of 225 with a page). Number 98 in Spain in 2019, of 102.

The power measured by the satellite is low (7.9 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
104ha
Copernicus perimeter
Duration
1day
25 Feb 2019 – 25 Feb 2019
Municipalities hit
1
municipalities
Started on
25 Feb
2019
Heat detections
6
in a single hotspot: 8 MW
Danger at start
2
Very low · FWI index
Average daily power
26MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 25 Feb25 Feb

How it evolved, day by day

25 Feb 2019 · 26 MW · 6

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

19°high
19km/h · peak gust
34%lowest humidity

It had gone 6 days without rain (1 mm or more) when it started. Rain came after the fire: 2.2 mm on 3 Mar.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

What happened to each town

  1. Cangas del Narcea 11,282 inhabitants · 7.7 km from the centre where it started
    104 ha reached on 25 Feb
    0.1 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land91 %
  • Broadleaved forest9.2 %

Natura 2000 protected area affected: 100 %

Natura 2000 sites (European Environment Agency, 2024 release) crossed by the perimeter.

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

Official record

Complex of 2 fires according to EGIF (MITECO)

According to EGIF (MITECO), 2 fires started inside this perimeter on these dates, totalling 106 ha (the satellite measured 104 ha).

EGIF (MITECO) records each fire that started at a different time or place separately; the satellite sees a single burned area, so this page groups them together. The numbers on the map show where each one started.

When each one burned

1 55 ha 2 51 ha
24 Feb26 Feb
arson
  1. 1 Cangas del Narcea Besullo 24 February 2019 · 20:26 55 ha · extinguished on 25 February 2019 · cause: arson
  2. 2 Cangas del Narcea Besullo 25 February 2019 · 17:50 51 ha · extinguished on 26 February 2019 · cause: arson

Total according to EGIF (MITECO): 106 ha, 102 % of the 104 ha in the satellite perimeter.

MITECO, Estadística General de Incendios Forestales (EGIF). This is the agency’s consolidated statistic: it measures the area in its own way, which is why it can differ from the satellite.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
25 Feb 19.2 °C 34 % 19 km/h 0.0 mm Very low 2
26 Feb after 20.5 °C 36 % 22 km/h 0.0 mm Very low 4
27 Feb after 16.8 °C 35 % 40 km/h 0.0 mm Very low 4
28 Feb after 13.4 °C 44 % 26 km/h 0.0 mm Very low 5
1 Mar after 13.8 °C 59 % 39 km/h 0.0 mm Very low 3
2 Mar after 15.7 °C 46 % 45 km/h 0.2 mm Low 6
3 Mar after 14.8 °C 44 % 102 km/h 2.2 mm Low 10

Its twins: fires that started in the same weather

It started with an FWI of 2.5, a minimum humidity of 34% and 6 days without rain. Fires in the area that started in weather like this since 2016: 17.

FWI at the start 2.5
Minimum humidity 34 %
Days without rain 6
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Cangas del Narcea fire, January 2022
114 ha 1 day FWI 2.1 Min. humidity 33 % 3 km away, in 2022

First rain (1 mm or more) after it ended: 24.0 mm on 4 Jan.

What happened to them

1 day
median duration
143 ha
median area
0 %
went past 1,000 ha
5.0 mm
rain at the end (median; 14 of 17 had it)

It burned an area similar to its twins (104 ha against a median of 143 ha) and lasted 1 day, against 1 day.

In 3 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.2 mmfirst rain
3 Mar6 days after it ended
19km/h · max. gust

It was considered over on 25 Feb, and on 3 Mar 2.2 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 14 of 17, with a median of 5.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 18 Feb 2019
After · 4 Mar 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 23 February 2019 the air beside the fire reached 32 µg/m³ of PM2.5. That day averaged 22: 1.4 times the WHO daily guideline (15).

PM2.5 peak32 µg/m³
Days over the guideline4 days
PM1058 µg/m³
23 Feb25 Feb27 Feb
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 6Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Spain

Frequently asked questions

How long did the Cangas del Narcea fire last?
Copernicus dates it between 25 February 2019 and 25 February 2019: 1 day between the first and last image with fire. According to EGIF (MITECO), the largest of the 2 recorded fires was detected on 24 February 2019 at 20:26 and declared extinguished on 25 February 2019.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 104 hectares (1.0 km²). Official national figures may differ.
Which municipalities burned?
The fire only entered Cangas del Narcea (104 ha, 0.1 %).
Did the fire reach a town?
The fire started in Cangas del Narcea and came within 7.7 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 19.2 °C, humidity dropped to 34 % and gusts hit 19 km/h. The fire danger index (FWI) reached 2, class Very low.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Spain (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 17. Their median duration was 1 day and their median area 143 ha; 0 % went past 1,000 ha. In 3 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 6 Suomi-NPP VIIRS detections on those dates.
  • Compared with EGIF (MITECO): 106 official ha against 104 ha of perimeter; they agree within 25%.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.