Skip to content
worldfires
RO · Romania · –

C.A. Rosetti fire, 5 March 2020 C.A. Rosetti, Sulina

Out · last detection 8 Mar 2020, 11:09 UTC

The fire started on 5 March 2020 in C.A. Rosetti, Romania, and satellites saw it burning for 7 days. Copernicus mapped a burnt perimeter of 966 hectares from satellite imagery, spread across 2 municipalities.

This record is fire in the reed beds of the Danube Delta, not a forest fire. Thousands of hectares of reed burn in the delta every year, mostly between January and April, and many of these burns are deliberate. That is why it is left out of the fire rankings.

Burnt area
966ha
Copernicus perimeter
Duration
7days
5 Mar 2020 – 11 Mar 2020
Municipalities hit
2
municipalities
Started on
5 Mar
2020
Heat detections
20
in a single hotspot: 134 MW
Danger at start
3
Very low · FWI index
Average daily power
273MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 5 Mar11 Mar
8 Mar 2020

How it evolved, day by day

7 Mar 2020 · 3 MW · 1 8 Mar 2020 · 543 MW · 19
7 Mar 8 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

17°high
45km/h · peak gust
52%lowest humidity

It had gone 5 days without rain (1 mm or more) when it started.

This area had burned before

77% of the perimeter overlaps earlier fires recorded since 2016: 408 ha in 2017, 556 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 742 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 0.6% of the area of London (9.7 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. C.A. Rosetti 636 inhabitants · 2.7 km from the centre where it started
    491 ha reached on 8 Mar
    1.8 %
  2. Sulina 3,118 inhabitants · 8.0 km from the centre
    475 ha reached on 7 Mar
    1.4 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land100 %

Natura 2000 protected area affected: 100 %

Natura 2000 sites (European Environment Agency, 2024 release) crossed by the perimeter.

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
5 Mar 14.4 °C 69 % 21 km/h 0.0 mm Very low 3
6 Mar 14.2 °C 62 % 26 km/h 0.0 mm Very low 2
7 Mar 16.9 °C 52 % 35 km/h 0.0 mm Low 7
8 Mar 16.7 °C 63 % 31 km/h 0.4 mm Low 6
9 Mar 16.0 °C 59 % 26 km/h 0.0 mm Low 6
10 Mar 14.2 °C 70 % 45 km/h 1.5 mm Very low 4
11 Mar 15.7 °C 63 % 41 km/h 0.8 mm Very low 4
12 Mar after 17.2 °C 31 % 30 km/h 0.0 mm Low 6
13 Mar after 19.5 °C 47 % 37 km/h 0.0 mm Low 9
14 Mar after 13.9 °C 36 % 43 km/h 0.0 mm Low 8
15 Mar after 7.9 °C 26 % 48 km/h 0.0 mm Moderate 17
16 Mar after 8.4 °C 23 % 30 km/h 0.0 mm Low 11
17 Mar after 10.7 °C 36 % 43 km/h 0.0 mm Moderate 16
18 Mar after 10.1 °C 43 % 36 km/h 0.0 mm Moderate 14
19 Mar after 14.7 °C 30 % 26 km/h 0.0 mm Moderate 12
20 Mar after 18.4 °C 42 % 41 km/h 0.0 mm Moderate 17
21 Mar after 18.4 °C 37 % 44 km/h 0.0 mm Moderate 20

Its twins: fires that started in the same weather

It started with an FWI of 3.1, a minimum humidity of 69% and 5 days without rain. Fires in the area that started in weather like this since 2017: 7.

FWI at the start 3.1
Minimum humidity 69 %
Days without rain 5
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Holo Prystan fire, June 2026
172 ha 23 days FWI 8.8 Min. humidity 67 % 233 km away, in 2026

First rain (1 mm or more) after it ended: 7.6 mm on 8 Jul.

What happened to them

Fires in the area that started in similar weather: 7. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
45km/h · max. gust

It was considered over on 11 Mar, and not even 1 mm fell in the following ten days: it went out without rain.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2017.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 27 Feb 2020
After · 18 Mar 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 10 March 2020 the air beside the fire reached 32 µg/m³ of PM2.5. That day averaged 22: 1.4 times the WHO daily guideline (15).

PM2.5 peak32 µg/m³
Days over the guideline5 days
PM1053 µg/m³
3 Mar6 Mar9 Mar12 Mar
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 20Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Romania

Frequently asked questions

How long did the C.A. Rosetti fire last?
Copernicus dates it between 5 March 2020 and 11 March 2020: 7 days between the first and last image with fire.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 966 hectares (9.7 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: C.A. Rosetti (491 ha, 1.8 %); Sulina (475 ha, 1.4 %).
Did the fire reach a town?
The fire started in C.A. Rosetti and came within 2.7 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 16.9 °C, humidity dropped to 52 % and gusts hit 45 km/h. The fire danger index (FWI) reached 7, class Low.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Romania (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 20 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.