Skip to content
worldfires
ET · Ethiopia · –

Bure fire, January 2020 Bure, Hawa Galan, Metu Zuria

Out · last detection 23 Jan 2020, 11:43 UTC

The fire started on 19 January 2020 in Bure, Ethiopia, and satellites saw it burning for 6 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,215 hectares from heat detections, spread across 3 municipalities.

It is the 179th largest in Oromia since 2016 (of 223 with a page). Number 136 in Ethiopia in 2020, of 177.

Burnt area
2,215ha
GWIS perimeter (Copernicus)
Duration
6days
19 Jan 2020 – 24 Jan 2020
Municipalities hit
3
districts
Started on
19 Jan
2020
Heat detections
69
in a single hotspot: 94 MW
Danger at start
28
High · FWI index
Average daily power
453MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 19 Jan24 Jan
23 Jan 2020

How it evolved, day by day

20 Jan 2020 · 853 MW · 59 21 Jan 2020 · 22 MW · 4 23 Jan 2020 · 483 MW · 6
20 Jan 21 Jan 23 Jan

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
34km/h · peak gust
24%lowest humidity

It had gone 12 days without rain (1 mm or more) when it started.

This area had burned before

97% of the perimeter overlaps earlier fires recorded since 2016: 2,508 ha in 2016, 129 ha in 2017, 1,143 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 2,147 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.4% of the area of London (22 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Bure where it started
    2,027 ha reached on 20 Jan
    1.9 %
  2. 201 ha reached on 20 Jan
    0.2 %
  3. 2 ha reached on 20 Jan
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
19 Jan 32.2 °C 24 % 22 km/h 0.0 mm High 28
20 Jan 31.3 °C 25 % 25 km/h 0.0 mm High 30
21 Jan 31.4 °C 29 % 22 km/h 0.0 mm High 30
22 Jan 30.3 °C 32 % 34 km/h 0.0 mm High 32
23 Jan 29.5 °C 30 % 32 km/h 0.0 mm High 32
24 Jan 29.9 °C 36 % 24 km/h 0.0 mm High 27
25 Jan after 31.8 °C 31 % 24 km/h 0.0 mm High 29
26 Jan after 31.6 °C 24 % 25 km/h 0.0 mm High 32
27 Jan after 30.1 °C 29 % 33 km/h 0.0 mm High 34
28 Jan after 31.2 °C 32 % 27 km/h 0.0 mm High 30
29 Jan after 30.1 °C 27 % 19 km/h 0.0 mm High 30
30 Jan after 30.4 °C 36 % 36 km/h 0.0 mm High 32
31 Jan after 29.3 °C 39 % 35 km/h 0.0 mm High 29
1 Feb after 28.6 °C 38 % 22 km/h 0.0 mm High 26
2 Feb after 31.7 °C 29 % 25 km/h 0.0 mm High 30
3 Feb after 32.0 °C 27 % 25 km/h 0.0 mm High 32

Its twins: fires that started in the same weather

It started with an FWI of 28.2, a minimum humidity of 24% and 12 days without rain. Fires in the area that started in weather like this since 2016: 47.

FWI at the start 28.2
Minimum humidity 24 %
Days without rain 12
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Gambela Zuria fire, November 2016
2,319 ha 7 days FWI 30.1 Min. humidity 24 % 48 km away, in 2016

First rain (1 mm or more) after it ended: 2.1 mm on 23 Nov.

What happened to them

11 days
median duration
3,578 ha
median area
17 %
went past 10,000 ha
1.5 mm
rain at the end (median; 12 of 47 had it)

It stayed below its twins: 2,215 ha against a median of 3,578 ha. It lasted 6 days, against 11 days.

In 35 of 47, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.5 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
34km/h · max. gust

It was considered over on 24 Jan, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 12 of 47, with a median of 1.5 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 12 Jan 2020
After · 31 Jan 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 69Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Ethiopia

Frequently asked questions

How long did the Bure fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 19 January 2020 to 24 January 2020 (6 days). The perimeter dates it from 20 January 2020 to 23 January 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,215 hectares (22.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Bure (2,027 ha, 1.9 %); Hawa Galan (201 ha, 0.2 %); Metu Zuria (2 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 32.2 °C, humidity dropped to 24 % and gusts hit 34 km/h. The fire danger index (FWI) reached 32, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Ethiopia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 47. Their median duration was 11 days and their median area 3,578 ha; 17 % went past 10,000 ha. In 35 of 47, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.5 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 23 January 2020 → 24 January 2020.
  2. Start date: 20 January 2020 → 19 January 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 20 January 2020 to 23 January 2020. 69 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.