Broome fire, 18 September 2021 Broome
The fire started on 18 September 2021 in Broome, Australia, and satellites saw it burning for 33 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 39,443 hectares from heat detections, spread across a single municipality.
It is the 115th largest in Western Australia since 2016 (of 2732 with a page). Number 25 in Australia in 2021, of 460.
Compare with…
Suggestions: Broome · 2019Broome · 2018Broome · 2020Broome · 2017
- Burnt area
- 39,443ha
- GWIS perimeter (Copernicus)
- Duration
- 33days
- 18 Sept 2021 – 20 Oct 2021
- Municipalities hit
- 1
- local government areas
- Started on
- 18 Sept
- 2021
- Heat detections
- 1,406
- in a single hotspot: 190 MW
- Danger at start
- 45
- Very high · FWI index
- Average daily power
- 620MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone more than two months without rain (1 mm or more) when it started.
This area had burned before
96% of the perimeter overlaps earlier fires recorded since 2016: 4,021 ha in 2016, 11,578 ha in 2017, 23,082 ha in 2018, 24,033 ha in 2019, 15,728 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 37,926 ha that had burned before.
- 6,628 ha Broome fire, June 2019 8,047 ha in total; the hectares shown are those it shares with this fire
- 5,023 ha Broome fire, October 2018 8,412 ha in total; the hectares shown are those it shares with this fire
- 4,714 ha Broome fire, May 2020 5,174 ha in total; the hectares shown are those it shares with this fire
- 4,142 ha Broome fire, October 2017 5,122 ha in total; the hectares shown are those it shares with this fire
- 3,719 ha Broome fire, June 2019 5,056 ha in total; the hectares shown are those it shares with this fire
- 2,951 ha Broome fire, July 2018 5,071 ha in total; the hectares shown are those it shares with this fire
- 464 ha Broome fire, July 2019 7,799 ha in total; the hectares shown are those it shares with this fire
- 278 ha Broome fire, August 2018 6,361 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Broome where it started39,322 ha reached on 18 Sept0.7 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2020Inside the perimeter there were about 2.3 hectares of built-up land and about 30 residents (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 18 Sept | 34.5 °C | 25 % | 40 km/h | 0.0 mm | Very high 45 |
| 19 Sept | 30.8 °C | 43 % | 31 km/h | 0.0 mm | High 32 |
| 20 Sept | 34.0 °C | 34 % | 28 km/h | 0.0 mm | High 34 |
| 21 Sept | 34.5 °C | 31 % | 49 km/h | 0.0 mm | Very high 42 |
| 22 Sept | 33.3 °C | 22 % | 44 km/h | 0.0 mm | Very high 50 |
| 23 Sept | 30.9 °C | 18 % | 46 km/h | 0.0 mm | Extreme 53 |
| 24 Sept | 28.7 °C | 29 % | 27 km/h | 0.0 mm | Very high 38 |
| 25 Sept | 29.4 °C | 44 % | 29 km/h | 0.0 mm | High 31 |
| 26 Sept | 29.6 °C | 42 % | 28 km/h | 0.0 mm | High 30 |
| 27 Sept | 31.4 °C | 39 % | 30 km/h | 0.0 mm | High 32 |
| 28 Sept | 31.7 °C | 36 % | 30 km/h | 0.0 mm | High 32 |
| 29 Sept | 31.6 °C | 42 % | 29 km/h | 0.0 mm | High 32 |
| 30 Sept | 32.5 °C | 38 % | 28 km/h | 0.0 mm | High 34 |
| 1 Oct | 32.2 °C | 40 % | 38 km/h | 0.0 mm | Very high 38 |
| 2 Oct | 31.7 °C | 42 % | 42 km/h | 0.0 mm | Very high 40 |
| 3 Oct | 30.4 °C | 44 % | 35 km/h | 0.0 mm | High 35 |
| 4 Oct | 30.5 °C | 41 % | 38 km/h | 0.0 mm | High 36 |
| 5 Oct | 30.3 °C | 43 % | 41 km/h | 0.0 mm | Very high 38 |
| 6 Oct | 29.7 °C | 50 % | 34 km/h | 0.0 mm | High 30 |
| 7 Oct | 30.9 °C | 52 % | 28 km/h | 0.0 mm | High 29 |
| 8 Oct | 32.3 °C | 50 % | 37 km/h | 0.0 mm | High 34 |
| 9 Oct | 32.3 °C | 50 % | 38 km/h | 0.0 mm | High 33 |
| 10 Oct | 32.9 °C | 37 % | 30 km/h | 0.0 mm | High 34 |
| 11 Oct | 34.0 °C | 25 % | 45 km/h | 0.0 mm | Extreme 51 |
| 12 Oct | 33.6 °C | 25 % | 29 km/h | 0.0 mm | Very high 40 |
| 13 Oct | 35.1 °C | 19 % | 32 km/h | 0.0 mm | Very high 48 |
| 14 Oct | 35.2 °C | 18 % | 41 km/h | 0.0 mm | Extreme 56 |
| 15 Oct | 32.4 °C | 40 % | 29 km/h | 0.0 mm | High 37 |
| 16 Oct | 32.5 °C | 44 % | 34 km/h | 0.0 mm | High 36 |
| 17 Oct | 32.2 °C | 46 % | 36 km/h | 0.0 mm | High 36 |
| 18 Oct | 32.0 °C | 50 % | 34 km/h | 0.0 mm | High 31 |
| 19 Oct | 32.4 °C | 50 % | 38 km/h | 0.0 mm | High 35 |
| 20 Oct | 33.0 °C | 52 % | 38 km/h | 0.0 mm | High 34 |
| 21 Oct after | 33.9 °C | 39 % | 35 km/h | 0.0 mm | High 35 |
| 22 Oct after | 36.0 °C | 20 % | 31 km/h | 0.0 mm | Very high 47 |
| 23 Oct after | 36.9 °C | 19 % | 32 km/h | 0.0 mm | Very high 49 |
| 24 Oct after | 31.6 °C | 41 % | 34 km/h | 0.0 mm | High 36 |
| 25 Oct after | 30.4 °C | 62 % | 38 km/h | 0.0 mm | High 28 |
| 26 Oct after | 31.2 °C | 58 % | 35 km/h | 0.0 mm | High 27 |
| 27 Oct after | 31.7 °C | 53 % | 36 km/h | 0.0 mm | High 27 |
| 28 Oct after | 32.6 °C | 52 % | 37 km/h | 0.0 mm | High 28 |
| 29 Oct after | 32.3 °C | 54 % | 40 km/h | 0.0 mm | High 30 |
| 30 Oct after | 31.6 °C | 55 % | 37 km/h | 0.0 mm | High 28 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 1,406Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 23,045 haBroome18 September 2025 · 14 days · 1 km away
- 26,901 haBroomeOctober 2022 · 16 days · 10 km away
- 22,582 haBroome1 August 2021 · 32 days · 20 km away
- 16,848 haBroomeSeptember 2022 · 9 days · 38 km away
- 15,575 haBroome1 September 2025 · 16 days · 39 km away
- 16,277 haBroome20 August 2025 · 15 days · 40 km away
Frequently asked questions
- How long did the Broome fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 18 September 2021 to 20 October 2021 (33 days). The perimeter dates it from 21 September 2021 to 20 October 2021.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 39,443 hectares (394.4 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Broome (39,322 ha, 0.7 %).
- What was the weather like?
- During the fire the temperature reached 35.2 °C, humidity dropped to 18 % and gusts hit 49 km/h. The fire danger index (FWI) reached 56, class Extreme.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 000 · Emergency number and official warnings ›
Satellite cross-check
History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
- Start date: 21 September 2021 → 18 September 2021.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 21 September 2021 to 20 October 2021. 1,406 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.