Bondo fire, February 2026 Bondo
The fire started on 22 February 2026 in Bondo, Congo - Kinshasa, and satellites saw it burning for 19 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,506 hectares from heat detections, spread across a single municipality.
It is the 14th largest in Lower Uele since 2016 (of 48 with a page). Number 230 in Congo - Kinshasa in 2026, of 523.
- Burnt area
- 8,506ha
- GWIS perimeter (Copernicus)
- Duration
- 19days
- 22 Feb 2026 – 12 Mar 2026
- Municipalities hit
- 1
- territories
- Started on
- 22 Feb
- 2026
- Heat detections
- 212
- in a single hotspot: 146 MW
- Danger at start
- 15
- Moderate · FWI index
- Energy released
- 2.6GW
- sum of detected power
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 1.6 mm on 20 Mar.
This area had burned before
67% of the perimeter overlaps earlier fires recorded since 2016: 853 ha in 2016, 320 ha in 2017, 3,354 ha in 2019, 23 ha in 2020, 4,675 ha in 2021, 3,476 ha in 2022, 1,734 ha in 2023, 2,607 ha in 2024, 1,821 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 5,702 ha that had burned before.
What happened to each town
-
Bondo where it started8,558 ha reached on 22 Feb0.2 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 22 Feb | 33.1 °C | 39 % | 23 km/h | 0.0 mm | Moderate 15 |
| 23 Feb | 32.3 °C | 43 % | 24 km/h | 0.2 mm | Moderate 16 |
| 24 Feb | 34.3 °C | 30 % | 19 km/h | 0.0 mm | Moderate 21 |
| 25 Feb | 35.1 °C | 15 % | 18 km/h | 0.0 mm | High 29 |
| 26 Feb | 34.9 °C | 16 % | 27 km/h | 0.0 mm | High 32 |
| 27 Feb | 34.8 °C | 18 % | 26 km/h | 0.0 mm | High 32 |
| 28 Feb | 34.7 °C | 24 % | 26 km/h | 0.0 mm | High 31 |
| 1 Mar | 34.3 °C | 27 % | 17 km/h | 0.0 mm | High 30 |
| 2 Mar | 32.5 °C | 42 % | 25 km/h | 0.3 mm | High 23 |
| 3 Mar | 31.2 °C | 35 % | 27 km/h | 0.6 mm | Moderate 20 |
| 4 Mar | 34.2 °C | 23 % | 20 km/h | 0.0 mm | High 30 |
| 5 Mar | 32.8 °C | 28 % | 19 km/h | 0.0 mm | High 29 |
| 6 Mar | 34.6 °C | 28 % | 27 km/h | 0.0 mm | High 30 |
| 7 Mar | 36.2 °C | 26 % | 24 km/h | 0.0 mm | High 30 |
| 8 Mar | 37.0 °C | 16 % | 27 km/h | 0.0 mm | High 35 |
| 9 Mar | 37.7 °C | 15 % | 30 km/h | 0.0 mm | Very high 39 |
| 10 Mar | 34.5 °C | 25 % | 23 km/h | 0.0 mm | High 36 |
| 11 Mar | 35.3 °C | 29 % | 26 km/h | 0.0 mm | High 35 |
| 12 Mar | 32.8 °C | 41 % | 28 km/h | 1.8 mm | Moderate 16 |
| 13 Mar after | 35.6 °C | 32 % | 24 km/h | 0.0 mm | High 24 |
| 14 Mar after | 36.4 °C | 30 % | 26 km/h | 0.0 mm | High 29 |
| 15 Mar after | 30.7 °C | 53 % | 32 km/h | 0.9 mm | Moderate 17 |
| 16 Mar after | 33.4 °C | 39 % | 27 km/h | 0.2 mm | High 22 |
| 17 Mar after | 34.1 °C | 37 % | 30 km/h | 0.1 mm | High 25 |
| 18 Mar after | 33.9 °C | 37 % | 32 km/h | 0.9 mm | High 23 |
| 19 Mar after | 31.6 °C | 47 % | 19 km/h | 0.3 mm | High 22 |
| 20 Mar after | 34.1 °C | 40 % | 25 km/h | 1.6 mm | Moderate 17 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 1 March 2026 the air beside the fire reached 77 µg/m³ of PM2.5. That day averaged 65: 4.3 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 212Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Bondo fire last?
- GWIS (Copernicus) dates it between 22 February 2026 and 12 March 2026: 19 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,506 hectares (85.1 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Bondo (8,558 ha, 0.2 %).
- What was the weather like?
- During the fire the temperature reached 37.7 °C, humidity dropped to 15 % and gusts hit 30 km/h. The fire danger index (FWI) reached 39, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Congo - Kinshasa (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.