Bokora fire, 27 August 2026 Bokora, Usuk
The fire started on 27 August 2026 in Bokora, Uganda, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,578 hectares from heat detections, spread across 2 municipalities.
It is the 465th largest in Northern Region since 2016 (of 1377 with a page). Number 88 in Uganda in 2026, of 270.
- Burnt area
- 1,578ha
- GWIS perimeter (Copernicus)
- Duration
- 10days
- 27 Aug 2026 – 5 Sept 2026
- Municipalities hit
- 2
- counties
- Started on
- 27 Aug
- 2026
- Heat detections
- 15
- in a single hotspot: 41 MW
- Danger at start
- 37
- High · FWI index
- Energy released
- 210MW
- sum of detected power
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 3 days without rain (1 mm or more) when it started.
This area had burned before
50% of the perimeter overlaps earlier fires recorded since 2016: 230 ha in 2017, 8 ha in 2021, 697 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 785 ha that had burned before.
- 480 ha Usuk fire, November 2025 1,191 ha in total; the hectares shown are those it shares with this fire
- 230 ha Usuk fire, November 2017 1,561 ha in total; the hectares shown are those it shares with this fire
- 215 ha Bokora fire, November 2025 2,868 ha in total; the hectares shown are those it shares with this fire
- 8 ha Bokora fire, December 2021 1,155 ha in total; the hectares shown are those it shares with this fire
- 2 ha Pian fire, November 2025 2,278 ha in total; the hectares shown are those it shares with this fire
What happened to each town
-
Bokora where it started923 ha reached on 30 Aug0.2 %
-
665 ha reached on 29 Aug0.3 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 27 Aug | 36.1 °C | 17 % | 29 km/h | 0.0 mm | High 37 |
| 28 Aug | 36.1 °C | 14 % | 28 km/h | 0.0 mm | Very high 40 |
| 29 Aug | 36.1 °C | 16 % | 23 km/h | 0.0 mm | Very high 38 |
| 30 Aug | 35.2 °C | 16 % | 30 km/h | 0.0 mm | Very high 44 |
| 31 Aug | 35.2 °C | 20 % | 29 km/h | 0.0 mm | Very high 44 |
| 1 Sept | 34.4 °C | 27 % | 28 km/h | 0.0 mm | High 38 |
| 2 Sept | 36.0 °C | 18 % | 30 km/h | 0.0 mm | Very high 40 |
| 3 Sept | 36.5 °C | 18 % | 26 km/h | 0.0 mm | Very high 39 |
| 4 Sept | 35.3 °C | 24 % | 20 km/h | 0.0 mm | High 37 |
| 5 Sept | 36.8 °C | 17 % | 36 km/h | 0.0 mm | Very high 45 |
| 6 Sept after | 35.3 °C | 22 % | 29 km/h | 0.0 mm | Very high 41 |
| 7 Sept after | 36.0 °C | 20 % | 26 km/h | 0.0 mm | Very high 43 |
| 8 Sept after | 36.4 °C | 20 % | 26 km/h | 0.0 mm | Very high 41 |
| 9 Sept after | 34.4 °C | 28 % | 24 km/h | 0.0 mm | Very high 39 |
| 10 Sept after | 33.6 °C | 26 % | 22 km/h | 0.1 mm | Very high 38 |
| 11 Sept after | 33.7 °C | 27 % | 20 km/h | 0.0 mm | High 37 |
| 12 Sept after | 33.9 °C | 27 % | 32 km/h | 0.4 mm | Very high 46 |
| 13 Sept after | 34.0 °C | 27 % | 24 km/h | 0.4 mm | High 35 |
| 14 Sept after | 34.6 °C | 22 % | 26 km/h | 0.1 mm | Very high 42 |
| 15 Sept after | 34.1 °C | 29 % | 30 km/h | 0.0 mm | Very high 38 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 29 August 2026 the air beside the fire reached 36 µg/m³ of PM2.5. That day averaged 20: 1.4 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 15Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Bokora fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 27 August 2026 to 5 September 2026 (10 days). The perimeter dates it from 30 August 2026 to 5 September 2026.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,578 hectares (15.8 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 2 municipalities: Bokora (923 ha, 0.2 %); Usuk (665 ha, 0.3 %).
- What was the weather like?
- During the fire the temperature reached 36.8 °C, humidity dropped to 14 % and gusts hit 36 km/h. The fire danger index (FWI) reached 45, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Uganda (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 999 · 112
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.