Skip to content
worldfires
US · United States · –

Blanket Creek Fire, July 2017 Klamath, Jackson

Out · last detection 17 Sept 2017, 20:10 UTC

The fire started on 25 July 2017 in Klamath, United States, and satellites saw it burning for 55 days. United States agencies (MTBS / NIFC) mapped an official burnt perimeter of 13,252 hectares, spread across 2 counties.

It is the 57th largest in Oregon since 2016 (of 325 with a page). Number 61 in United States in 2017, of 619.

Burnt area
13,252ha
official perimeter (MTBS / NIFC)
Duration
≈ 55days
25 Jul 2017 – 17 Sept 2017
Counties hit
2
counties
Started on
25 Jul
2017
Heat detections
4,279
in a single hotspot: 430 MW
Danger at start
10
Low · FWI index
Average daily power
1.5GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 25 Jul17 Sept
17 Sept 2017

How it evolved, day by day

27 Jul 2017 · 39 MW · 6 28 Jul 2017 · 88 MW · 23 29 Jul 2017 · 61 MW · 10 30 Jul 2017 · 42 MW · 19 31 Jul 2017 · 101 MW · 22 1 Aug 2017 · 76 MW · 23 2 Aug 2017 · 471 MW · 57 3 Aug 2017 · 273 MW · 50 4 Aug 2017 · 1,237 MW · 51 5 Aug 2017 · 1,988 MW · 126 6 Aug 2017 · 44 MW · 33 7 Aug 2017 · 63 MW · 32 8 Aug 2017 · 288 MW · 47 9 Aug 2017 · 234 MW · 27 10 Aug 2017 · 46 MW · 5 11 Aug 2017 · 262 MW · 14 12 Aug 2017 · 137 MW · 17 13 Aug 2017 · 27 MW · 9 14 Aug 2017 · 19 MW · 4 15 Aug 2017 · 67 MW · 11 16 Aug 2017 · 63 MW · 16 17 Aug 2017 · 97 MW · 22 18 Aug 2017 · 139 MW · 20 19 Aug 2017 · 192 MW · 25 20 Aug 2017 · 163 MW · 25 21 Aug 2017 · 1,457 MW · 48 22 Aug 2017 · 275 MW · 46 23 Aug 2017 · 673 MW · 77 24 Aug 2017 · 226 MW · 71 25 Aug 2017 · 35 MW · 18 26 Aug 2017 · 1,945 MW · 65 27 Aug 2017 · 5,188 MW · 123 28 Aug 2017 · 2,422 MW · 167 29 Aug 2017 · 2,463 MW · 176 30 Aug 2017 · 1,050 MW · 177 31 Aug 2017 · 537 MW · 114 1 Sept 2017 · 3,566 MW · 169 2 Sept 2017 · 2,199 MW · 207 3 Sept 2017 · 1,533 MW · 170 4 Sept 2017 · 24,689 MW · 822 5 Sept 2017 · 17,884 MW · 631 6 Sept 2017 · 271 MW · 36 7 Sept 2017 · 6 MW · 1 8 Sept 2017 · 35 MW · 19 9 Sept 2017 · 72 MW · 26 10 Sept 2017 · 69 MW · 20 11 Sept 2017 · 3,296 MW · 95 12 Sept 2017 · 644 MW · 75 13 Sept 2017 · 475 MW · 80 14 Sept 2017 · 31 MW · 6 15 Sept 2017 · 569 MW · 81 16 Sept 2017 · 475 MW · 24 17 Sept 2017 · 282 MW · 41
27 Jul 7 Aug 18 Aug 4 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
55km/h · peak gust
9%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 10.7 mm on 18 Sept.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 8.4% of the area of London (133 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each county

  1. Klamath where it started
    11,624 ha reached on 3 Aug
    0.7 %
  2. 1,642 ha reached on 27 Jul
    0.2 %

Burnt area inside each county, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
25 Jul 27.3 °C 33 % 36 km/h 1.9 mm Low 10
26 Jul 25.9 °C 29 % 36 km/h 0.4 mm Moderate 11
27 Jul 25.8 °C 24 % 40 km/h 0.0 mm High 29
28 Jul 26.8 °C 21 % 40 km/h 0.0 mm High 33
29 Jul 28.3 °C 20 % 43 km/h 0.0 mm High 33
30 Jul 30.0 °C 14 % 40 km/h 0.0 mm High 37
31 Jul 31.5 °C 14 % 40 km/h 0.0 mm High 37
1 Aug 32.7 °C 12 % 32 km/h 0.0 mm Very high 40
2 Aug 34.1 °C 11 % 40 km/h 0.0 mm Very high 45
3 Aug 33.1 °C 10 % 48 km/h 0.0 mm Extreme 56
4 Aug 30.4 °C 13 % 48 km/h 0.0 mm Extreme 58
5 Aug 24.7 °C 16 % 42 km/h 0.0 mm Extreme 51
6 Aug 27.5 °C 17 % 30 km/h 1.3 mm Very high 41
7 Aug 26.2 °C 23 % 35 km/h 2.6 mm Moderate 20
8 Aug 28.0 °C 19 % 28 km/h 0.3 mm Low 9
9 Aug 27.8 °C 21 % 31 km/h 1.3 mm High 22
10 Aug 27.4 °C 18 % 33 km/h 2.0 mm High 25
11 Aug 25.7 °C 28 % 30 km/h 2.3 mm Moderate 12
12 Aug 24.0 °C 27 % 47 km/h 0.0 mm Moderate 13
13 Aug 20.6 °C 48 % 41 km/h 0.6 mm Moderate 16
14 Aug 22.3 °C 21 % 41 km/h 0.0 mm High 25
15 Aug 23.1 °C 16 % 37 km/h 0.0 mm High 31
16 Aug 26.4 °C 21 % 43 km/h 0.0 mm High 34
17 Aug 27.0 °C 17 % 38 km/h 0.0 mm High 35
18 Aug 27.2 °C 14 % 46 km/h 0.0 mm Very high 41
19 Aug 25.8 °C 17 % 40 km/h 0.0 mm High 38
20 Aug 26.5 °C 15 % 36 km/h 0.0 mm High 35
21 Aug 26.6 °C 19 % 32 km/h 0.0 mm High 38
22 Aug 25.7 °C 26 % 41 km/h 1.0 mm Very high 40
23 Aug 24.6 °C 25 % 42 km/h 0.0 mm High 28
24 Aug 23.9 °C 28 % 41 km/h 0.0 mm High 28
25 Aug 26.4 °C 21 % 35 km/h 0.0 mm High 28
26 Aug 30.3 °C 13 % 27 km/h 0.0 mm High 37
27 Aug 29.7 °C 11 % 33 km/h 0.0 mm Very high 45
28 Aug 31.0 °C 13 % 35 km/h 0.0 mm Very high 46
29 Aug 29.4 °C 14 % 44 km/h 0.0 mm Extreme 54
30 Aug 24.5 °C 19 % 43 km/h 0.0 mm Very high 44
31 Aug 29.3 °C 10 % 29 km/h 0.0 mm High 35
1 Sept 33.4 °C 10 % 26 km/h 0.0 mm Very high 43
2 Sept 33.5 °C 9 % 32 km/h 0.0 mm Very high 43
3 Sept 31.1 °C 14 % 41 km/h 0.0 mm Very high 49
4 Sept 31.2 °C 11 % 37 km/h 0.0 mm Very high 48
5 Sept 31.4 °C 13 % 38 km/h 0.1 mm Extreme 52
6 Sept 26.1 °C 38 % 29 km/h 1.0 mm High 33
7 Sept 23.4 °C 40 % 27 km/h 12.7 mm Moderate 13
8 Sept 21.3 °C 44 % 32 km/h 0.9 mm Very low 2
9 Sept 23.0 °C 36 % 44 km/h 0.0 mm Low 8
10 Sept 26.8 °C 24 % 25 km/h 0.0 mm Moderate 15
11 Sept 29.4 °C 18 % 22 km/h 0.0 mm High 26
12 Sept 22.4 °C 38 % 34 km/h 0.0 mm High 31
13 Sept 23.0 °C 25 % 45 km/h 0.0 mm High 34
14 Sept 15.9 °C 26 % 42 km/h 0.2 mm High 31
15 Sept 18.8 °C 17 % 30 km/h 0.0 mm High 25
16 Sept 17.9 °C 21 % 27 km/h 0.1 mm High 28
17 Sept 16.2 °C 33 % 55 km/h 0.3 mm High 36
18 Sept after 10.0 °C 58 % 55 km/h 10.7 mm Low 6

Its twins: fires that started in the same weather

It started with an FWI of 9.7, a minimum humidity of 33% and rain the day before. Fires in the area that started in weather like this since 2016: 8.

FWI at the start 9.7
Minimum humidity 33 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Log Fire, August 2025
473 ha 8 days FWI 15.1 Min. humidity 31 % 175 km away, in 2025

First rain (1 mm or more) after it ended: 3.1 mm on 6 Sept.

What happened to them

Fires in the area that started in similar weather: 8. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

10.7 mmfirst rain
18 Septthe day after it ended
55km/h · max. gust

It was considered over on 17 Sept, and on 18 Sept 10.7 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 18 Jul 2017
After · 24 Sept 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 4,279Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in United States

Frequently asked questions

How long did the Blanket Creek Fire last?
The official perimeter only gives the start date (25 July 2017). The end comes from the heat detections inside the perimeter: it burned until 17 September 2017 (55 days from 25 July 2017), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The official perimeter published by United States agencies (MTBS / NIFC) is 13,252 hectares (132.5 km²). Other tallies, such as daily incident reports, may give slightly different figures.
Which counties burned?
The fire entered 2 counties: Klamath (11,624 ha, 0.7 %); Jackson (1,642 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 34.1 °C, humidity dropped to 9 % and gusts hit 55 km/h. The fire danger index (FWI) reached 58, class Extreme.
Where does this data come from?
From the official burnt perimeter of United States agencies (MTBS / NIFC, public domain), NASA FIRMS VIIRS hotspots and the administrative boundaries of United States. It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: MTBS (US Geological Survey and US Forest Service), official.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 4,279 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official and in the public domain. For past years it comes from MTBS (Monitoring Trends in Burn Severity), run by the U.S. Geological Survey and the USDA Forest Service, which map it on Landsat and Sentinel-2 imagery. For the current and last year it comes from WFIGS at the National Interagency Fire Center (NIFC): incident perimeters mapped by fire crews, aircraft and imagery. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. County boundaries come from geoBoundaries ADM2 (Public Domain). The area per county is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.