Skip to content
worldfires
DZ · Algeria · –

Bir Mokkadem fire, August 2026 بئر مقدم · Bir Mokkadem, Tebessa

Out · last detection 27 Aug 2026, 01:34 UTC

The fire started on 25 August 2026 in Bir Mokkadem, Algeria, and satellites saw it burning for 3 days. Copernicus mapped a burnt perimeter of 1,116 hectares from satellite imagery, spread across 2 municipalities.

Number 57 in Algeria in 2026, of 197.

The power measured by the satellite is low (22.6 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
1,116ha
Copernicus perimeter
Duration
≈ 3days
25 Aug 2026 – 27 Aug 2026
Municipalities hit
2
communes
Started on
25 Aug
2026
Heat detections
71
in a single hotspot: 23 MW
Danger at start
76
Very extreme · FWI index
Average daily power
149MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 25 Aug27 Aug
27 Aug 2026

How it evolved, day by day

25 Aug 2026 · 4 MW · 1 26 Aug 2026 · 420 MW · 64 27 Aug 2026 · 23 MW · 6
25 Aug 26 Aug 27 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
49km/h · peak gust
10%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started. Rain came after the fire: 1.5 mm on 29 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.7% of the area of London (11 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Bir Mokkadem بئر مقدم 12,907 inhabitants · 17.3 km from the centre where it started
    1,118 ha reached on 25 Aug
    2.8 %
  2. Tebessa تبسة 194,461 inhabitants · 10.2 km from the centre
    0 ha
    0.0 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land47 %
  • Mixed forest39 %
  • Broadleaved forest15 %

Land cover inside the perimeter as reported by Copernicus EFFIS (outside the Corine Land Cover area).

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 48 % of the area in Algeria Very dry air: 26 % of the area in Algeria

Day High Min. humidity Peak gust Rain Danger (FWI)
25 Aug 39.7 °C 11 % 44 km/h 0.0 mm Very extreme 76
26 Aug 39.7 °C 10 % 49 km/h 0.0 mm Very extreme 80
27 Aug 39.7 °C 11 % 38 km/h 0.0 mm Very extreme 71
28 Aug after 38.7 °C 11 % 34 km/h 0.0 mm Extreme 61
29 Aug after 36.7 °C 14 % 40 km/h 1.5 mm Extreme 56

Its twins: fires that started in the same weather

It started with an FWI of 75.7, a minimum humidity of 11% and 2 days without rain. Fires in the area that started in weather like this since 2016: 18.

FWI at the start 75.7
Minimum humidity 11 %
Days without rain 2
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Hanancha fire, July 2025
227 ha 1 day FWI 75.0 Min. humidity 12 % 91 km away, in 2025

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

2 days
median duration
249 ha
median area
11 %
went past 1,000 ha
1.2 mm
rain at the end (median; 12 of 18 had it)

It was 4.5 times larger than the median of its twins and lasted 3 days, against 2 days.

Only 2 of its 18 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 6 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.5 mmfirst rain
29 Aug2 days after it ended
49km/h · max. gust

It was considered over on 27 Aug, and on 29 Aug 1.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 12 of 18, with a median of 1.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 18 Aug 2026
After · 3 Sept 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 28 August 2026 the air beside the fire reached 64 µg/m³ of PM2.5. That day averaged 32: 2.1 times the WHO daily guideline (15).

PM2.5 peak64 µg/m³
Days over the guideline4 days
PM10101 µg/m³
Optical depth0.79
23 Aug25 Aug27 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 71Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Algeria

Frequently asked questions

How long did the Bir Mokkadem fire last?
The official perimeter only gives the start date (25 August 2026). The end comes from the heat detections inside the perimeter: it burned until 27 August 2026 (3 days from 25 August 2026), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 1,116 hectares (11.2 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Bir Mokkadem (1,118 ha, 2.8 %); Tebessa (0 ha, 0.0 %).
Did the fire reach a town?
The fire came within 10.2 km of the centre of Tebessa, the closest of the areas it touched. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 39.7 °C, humidity dropped to 10 % and gusts hit 49 km/h. The fire danger index (FWI) reached 80, class Very extreme.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Algeria (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 18. Their median duration was 2 days and their median area 249 ha; 11 % went past 1,000 ha. Only 2 of its 18 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 6 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 14 · 1021 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 14 · 1021.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 71 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution-ShareAlike 2.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.