Bindura fire, 13 October 2026 Shamva, Bindura
The fire started on 13 October 2026 in Bindura, Zimbabwe, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,449 hectares from heat detections, spread across 2 municipalities.
It is the 29th largest in Mashonaland Central since 2016 (of 334 with a page). Number 63 in Zimbabwe in 2026, of 378.
Compare with…
Is it still active?
No detections since 24 Oct 2026, 10:34 UTC. That usually means no flame is visible from space any more, although hotspots may remain. Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.
- Burnt area
- 2,449ha
- GWIS perimeter (Copernicus)
- Duration
- 12days
- 13 Oct 2026 – 24 Oct 2026
- Municipalities hit
- 2
- districts
- Started on
- 13 Oct
- 2026
- Heat detections
- 52
- in a single hotspot: 69 MW
- Danger at start
- 21
- Moderate · FWI index
- Average daily power
- 96MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 4 days without rain (1 mm or more) when it started.
This area had burned before
68% of the perimeter overlaps earlier fires recorded since 2016: 790 ha in 2016, 1,215 ha in 2018, 361 ha in 2019, 1,021 ha in 2022, 487 ha in 2023, 30 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 1,662 ha that had burned before.
- 1,215 ha Shamva fire, September 2018 1,960 ha in total; the hectares shown are those it shares with this fire
- 1,021 ha Shamva fire, September 2022 1,872 ha in total; the hectares shown are those it shares with this fire
- 790 ha Shamva fire, September 2016 1,307 ha in total; the hectares shown are those it shares with this fire
- 487 ha Bindura fire, September 2023 2,082 ha in total; the hectares shown are those it shares with this fire
- 361 ha Bindura fire, September 2019 1,532 ha in total; the hectares shown are those it shares with this fire
- 30 ha Bindura fire, September 2025 1,168 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
1,783 ha reached on 17 Oct0.7 %
-
Bindura where it started684 ha reached on 13 Oct0.3 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 13 Oct | 30.7 °C | 28 % | 29 km/h | 0.0 mm | Moderate 21 |
| 14 Oct | 30.7 °C | 28 % | 39 km/h | 0.0 mm | High 25 |
| 15 Oct | 30.8 °C | 26 % | 41 km/h | 0.0 mm | High 26 |
| 16 Oct | 30.2 °C | 25 % | 42 km/h | 0.0 mm | High 29 |
| 17 Oct | 30.4 °C | 24 % | 32 km/h | 0.0 mm | High 25 |
| 18 Oct | 31.4 °C | 24 % | 31 km/h | 0.0 mm | High 25 |
| 19 Oct | 32.7 °C | 21 % | 30 km/h | 0.0 mm | High 26 |
| 20 Oct | 34.6 °C | 18 % | 30 km/h | 0.1 mm | High 28 |
| 21 Oct | 35.0 °C | 19 % | 32 km/h | 0.1 mm | High 31 |
| 22 Oct | 35.7 °C | 21 % | 25 km/h | 0.1 mm | High 27 |
| 23 Oct | 36.4 °C | 18 % | 38 km/h | 0.0 mm | Very high 39 |
| 24 Oct | 32.9 °C | 29 % | 40 km/h | 0.1 mm | High 37 |
| 25 Oct after | 30.7 °C | 29 % | 35 km/h | 0.1 mm | High 32 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 13 October 2026 the air beside the fire reached 28 µg/m³ of PM2.5. That day averaged 19: 1.2 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 52Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 1,960 haShamva11 September 2018 · 6 days · 1 km away
- 2,082 haBinduraSeptember 2023 · 9 days · 3 km away
- 2,093 haShamva18 September 2018 · 4 days · 11 km away
- 1,968 haShamvaOctober 2016 · 3 days · 11 km away
- 5,962 haMurehwa6 October 2022 · 5 days · 29 km away
- 6,034 haBindura2 October 2022 · 11 days · 34 km away
Frequently asked questions
- How long did the Bindura fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 13 October 2026 to 24 October 2026 (12 days). The perimeter dates it from 17 October 2026 to 20 October 2026.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,449 hectares (24.5 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 2 municipalities: Shamva (1,783 ha, 0.7 %); Bindura (684 ha, 0.3 %).
- Is the Bindura fire still active?
- No fire detections since 24 Oct 2026, 10:34 UTC. A lack of detections is not an official extinction.
- What was the weather like?
- During the fire the temperature reached 36.4 °C, humidity dropped to 18 % and gusts hit 42 km/h. The fire danger index (FWI) reached 39, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Zimbabwe (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
- Name: Shamva → Bindura.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 17 October 2026 to 20 October 2026. 52 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.