Skip to content
worldfires
AR · Argentina · –

Bermejo fire, 14 September 2026 Bermejo

Out · last detection

The fire started on in Bermejo, Argentina, and satellites saw it burning for 20 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,292 hectares from heat detections, spread across a single municipality.

Number 30 in Argentina in 2026, of 94.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
2,292ha
GWIS perimeter (Copernicus)
Duration
20days
14 Sept 2026 – 3 Oct 2026
Municipalities hit
1
departments
Started on
14 Sept
2026
Heat detections
98
in a single hotspot: 66 MW
Danger at start
13
Moderate · FWI index
Average daily power
122MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Sept3 Oct
3 Oct 2026

How it evolved, day by day

17 Sept 2026 · 56 MW · 14 20 Sept 2026 · 301 MW · 9 21 Sept 2026 · 412 MW · 19 23 Sept 2026 · 49 MW · 3 24 Sept 2026 · 53 MW · 11 25 Sept 2026 · 21 MW · 5 26 Sept 2026 · 258 MW · 15 27 Sept 2026 · 127 MW · 7 28 Sept 2026 · 35 MW · 8 2 Oct 2026 · 14 MW · 5 3 Oct 2026 · 11 MW · 2
21 Sept 26 Sept 2 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

44°high
64km/h · peak gust
18%lowest humidity

It had gone 13 days without rain (1 mm or more) when it started. Rain came after the fire: 9.8 mm on 8 Oct.

This area had burned before

49% of the perimeter overlaps earlier fires recorded since 2016: 547 ha in 2023, 751 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 1,113 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.4% of the area of London (23 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Bermejo where it started
    2,304 ha reached on 17 Sept
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Sept 21.3 °C 42 % 25 km/h 0.0 mm Moderate 13
15 Sept 26.2 °C 32 % 21 km/h 0.0 mm Moderate 15
16 Sept 28.4 °C 27 % 33 km/h 0.0 mm High 25
17 Sept 31.8 °C 27 % 31 km/h 0.0 mm High 26
18 Sept 27.9 °C 50 % 31 km/h 5.6 mm Low 11
19 Sept 29.5 °C 59 % 22 km/h 11.8 mm Very low 1
20 Sept 38.1 °C 33 % 48 km/h 0.0 mm Moderate 15
21 Sept 34.9 °C 36 % 59 km/h 0.0 mm Moderate 18
22 Sept 20.9 °C 27 % 35 km/h 0.0 mm High 22
23 Sept 25.8 °C 27 % 29 km/h 0.0 mm Moderate 17
24 Sept 31.2 °C 33 % 32 km/h 0.0 mm High 22
25 Sept 38.1 °C 31 % 49 km/h 0.0 mm High 29
26 Sept 41.2 °C 21 % 47 km/h 0.0 mm High 36
27 Sept 43.5 °C 18 % 64 km/h 0.0 mm Extreme 60
28 Sept 43.8 °C 19 % 60 km/h 0.0 mm Extreme 54
29 Sept 33.7 °C 38 % 42 km/h 5.6 mm Very low 2
30 Sept 25.3 °C 64 % 30 km/h 1.3 mm Very low 1
1 Oct 26.7 °C 49 % 33 km/h 0.0 mm Low 9
2 Oct 30.2 °C 34 % 33 km/h 0.0 mm Moderate 16
3 Oct 35.2 °C 37 % 62 km/h 5.5 mm Very high 39
4 Oct after 29.7 °C 39 % 42 km/h 0.0 mm Low 5
5 Oct after 24.7 °C 57 % 38 km/h 0.1 mm Low 7
6 Oct after 29.6 °C 46 % 30 km/h 0.1 mm Low 11
7 Oct after 33.1 °C 48 % 53 km/h 0.3 mm High 23
8 Oct after 32.5 °C 55 % 39 km/h 9.8 mm Moderate 13

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Sept 2026
After · 10 Oct 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 1 October 2026 the air beside the fire reached 309 µg/m³ of PM2.5. That day averaged 157: 10 times the WHO daily guideline (15).

PM2.5 peak309 µg/m³
Days over the guideline7 days
PM10317 µg/m³
Optical depth1.73
12 Sept16 Sept20 Sept24 Sept28 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 98Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Argentina

Frequently asked questions

How long did the Bermejo fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 14 September 2026 to 3 October 2026 (20 days). The perimeter dates it from 14 September 2026 to 29 September 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,292 hectares (22.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Bermejo (2,304 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 43.8 °C, humidity dropped to 18 % and gusts hit 64 km/h. The fire danger index (FWI) reached 60, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Argentina (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · 100 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911 · 100.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 14 September 2026 to 29 September 2026. 98 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.