Skip to content
worldfires
DZ · Algeria · –

Beni Djellil fire, August 2021 بني جليل · M'Cisna, Beni Maouche, Seddouk

Out · last detection 7 Aug 2021, 01:35 UTC

The fire started on 6 August 2021 in Beni Djellil, Algeria, and satellites saw it burning for 2 days. Copernicus mapped a burnt perimeter of 332 hectares from satellite imagery, spread across 4 municipalities.

It is the 46th largest in Bejaia since 2016 (of 101 with a page). Number 42 in Algeria in 2021, of 92.

The power measured by the satellite is low (26.2 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
332ha
Copernicus perimeter
Duration
2days
6 Aug 2021 – 7 Aug 2021
Municipalities hit
4
communes
Started on
6 Aug
2021
Heat detections
12
in a single hotspot: 26 MW
Danger at start
49
Very high · FWI index
Average daily power
44MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 6 Aug7 Aug
7 Aug 2021

How it evolved, day by day

6 Aug 2021 · 83 MW · 7 7 Aug 2021 · 6 MW · 5
6 Aug 7 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
38km/h · peak gust
20%lowest humidity

It had gone 48 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

What happened to each town

  1. M'Cisna مسيسنة 7,941 inhabitants · 4.5 km from the centre
    129 ha reached on 6 Aug
    3.2 %
  2. Beni Maouche بني معوش 13,412 inhabitants · 1.3 km from the centre
    96 ha reached on 7 Aug
    1.0 %
  3. Seddouk صدوق 20,573 inhabitants · 6.1 km from the centre
    62 ha reached on 7 Aug
    1.0 %
  4. Beni Djellil بني جليل 7,795 inhabitants · 4.7 km from the centre where it started
    46 ha reached on 6 Aug
    1.6 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land51 %
  • Mixed forest49 %

Land cover inside the perimeter as reported by Copernicus EFFIS (outside the Corine Land Cover area).

People and buildings inside the perimeter

GHSL 2020
Built-up area0.42 ha
Residents≈ 30

Inside the perimeter there were about 0.42 hectares of built-up land and about 30 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
6 Aug 37.8 °C 20 % 34 km/h 0.0 mm Very high 49
7 Aug 38.6 °C 21 % 38 km/h 0.1 mm Very high 44
8 Aug after 36.4 °C 29 % 34 km/h 0.0 mm Very high 42
9 Aug after 42.2 °C 12 % 57 km/h 0.0 mm Extreme 64
10 Aug after 42.6 °C 11 % 62 km/h 0.0 mm Very extreme 86
11 Aug after 41.9 °C 12 % 52 km/h 0.0 mm Very extreme 70
12 Aug after 43.1 °C 12 % 36 km/h 0.0 mm Extreme 56
13 Aug after 40.2 °C 15 % 37 km/h 0.0 mm Extreme 59
14 Aug after 39.0 °C 16 % 41 km/h 0.0 mm Extreme 58
15 Aug after 39.8 °C 15 % 37 km/h 0.3 mm Very high 49
16 Aug after 39.7 °C 15 % 38 km/h 0.9 mm Extreme 53
17 Aug after 33.3 °C 46 % 40 km/h 0.6 mm High 28

Its twins: fires that started in the same weather

It started with an FWI of 49.0, a minimum humidity of 20% and 48 days without rain. Fires in the area that started in weather like this since 2016: 22.

FWI at the start 49.0
Minimum humidity 20 %
Days without rain 48
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Kendira fire, August 2022
117 ha 2 days FWI 48.0 Min. humidity 19 % 23 km away, in 2022

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

2 days
median duration
191 ha
median area
5 %
went past 1,000 ha
1.7 mm
rain at the end (median; 12 of 22 had it)

It was 1.7 times larger than the median of its twins and lasted 2 days, against 2 days.

Only 8 of its 22 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 10 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.7 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
38km/h · max. gust

It was considered over on 7 Aug, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 12 of 22, with a median of 1.7 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 30 Jul 2021
After · 14 Aug 2021

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 12Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Algeria

Frequently asked questions

How long did the Beni Djellil fire last?
Copernicus dates it between 6 August 2021 and 7 August 2021: 2 days between the first and last image with fire.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 332 hectares (3.3 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 4 municipalities: M'Cisna (129 ha, 3.2 %); Beni Maouche (96 ha, 1.0 %); Seddouk (62 ha, 1.0 %); Beni Djellil (46 ha, 1.6 %).
Did the fire reach a town?
The fire came within 1.3 km of the centre of Beni Maouche, the closest of the areas it touched. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 38.6 °C, humidity dropped to 20 % and gusts hit 38 km/h. The fire danger index (FWI) reached 49, class Very high.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Algeria (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 22. Their median duration was 2 days and their median area 191 ha; 5 % went past 1,000 ha. Only 8 of its 22 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 10 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.7 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 14 · 1021 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 14 · 1021.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 12 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution-ShareAlike 2.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.