Skip to content
worldfires
ES · Spain · –

Belmonte de Miranda fire, February 2020 Belmonte de Miranda, Grado

Out · last measured on 21 Feb 2020

The fire started on 18 February 2020 in Belmonte de Miranda, Spain, and satellites saw it burning for 4 days. Copernicus mapped a burnt perimeter of 333 hectares from satellite imagery, spread across 2 municipalities. According to EGIF (MITECO), the largest of the 2 recorded fires was detected on 15 February 2020 at 22:10 and declared extinguished on 16 February 2020.

It is the 44th largest in Asturias since 2016 (of 225 with a page). Number 33 in Spain in 2020, of 89.

Compare with…

We have the Copernicus perimeter for this fire, but the VIIRS sensors did not capture it in enough detail: no day-by-day evolution, but the split by municipality is there.

Burnt area
333ha
Copernicus perimeter
Duration
4days
18 Feb 2020 – 21 Feb 2020
Municipalities hit
2
municipalities
Started on
18 Feb
2020
Danger at start
0
Very low · FWI index

Where it burned

The weather it burned in

16°high
28km/h · peak gust
40%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 3.0 mm on 25 Feb.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

What happened to each town

  1. Belmonte de Miranda 1,366 inhabitants · 11.2 km from the centre where it started
    314 ha
    1.5 %
  2. 19 ha
    0.1 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land96 %
  • Broadleaved forest2.7 %
  • Agricultural areas1.2 %

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

Official record

Complex of 2 fires according to EGIF (MITECO)

According to EGIF (MITECO), 2 fires started inside this perimeter on these dates, totalling 367 ha (the satellite measured 333 ha).

EGIF (MITECO) records each fire that started at a different time or place separately; the satellite sees a single burned area, so this page groups them together. The numbers on the map show where each one started.

When each one burned

1 7 ha 2 360 ha
15 Feb16 Feb
arson
  1. 1 Grado El Esquero 15 February 2020 · 16:02 7 ha · extinguished on 15 February 2020 · cause: arson
  2. 2 Belmonte de Miranda Pico Pedrorio y Otros 15 February 2020 · 22:10 360 ha · extinguished on 16 February 2020 · cause: arson

Total according to EGIF (MITECO): 367 ha, 110 % of the 333 ha in the satellite perimeter.

MITECO, Estadística General de Incendios Forestales (EGIF). This is the agency’s consolidated statistic: it measures the area in its own way, which is why it can differ from the satellite.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
18 Feb 9.1 °C 62 % 26 km/h 0.0 mm Very low 0
19 Feb 14.0 °C 40 % 21 km/h 0.0 mm Very low 0
20 Feb 14.1 °C 49 % 28 km/h 0.1 mm Very low 0
21 Feb 16.0 °C 53 % 19 km/h 0.0 mm Very low 0
22 Feb after 16.6 °C 39 % 21 km/h 0.0 mm Very low 1
23 Feb after 17.9 °C 40 % 17 km/h 0.0 mm Very low 2
24 Feb after 18.0 °C 31 % 37 km/h 0.0 mm Very low 3
25 Feb after 11.3 °C 62 % 42 km/h 3.0 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 0.0, a minimum humidity of 62% and rain the day before. Fires in the area that started in weather like this since 2016: 31.

FWI at the start 0.0
Minimum humidity 62 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Mieres fire, December 2021
105 ha 1 day FWI 0.4 Min. humidity 63 % 45 km away, in 2021

First rain (1 mm or more) after it ended: 23.0 mm on 4 Jan.

What happened to them

1 day
median duration
144 ha
median area
0 %
went past 1,000 ha
6.7 mm
rain at the end (median; 29 of 31 had it)

It was 2.3 times larger than the median of its twins and lasted 4 days, against 1 day.

Only 3 of its 31 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 31, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.7 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

3.0 mmfirst rain
25 Feb4 days after it ended
28km/h · max. gust

It was considered over on 21 Feb, and on 25 Feb 3.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 29 of 31, with a median of 6.7 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 11 Feb 2020
After · 28 Feb 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 22 February 2020 the air beside the fire reached 22 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak22 µg/m³
Days over the guideline0 days
PM1035 µg/m³
16 Feb18 Feb20 Feb22 Feb24 Feb
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Other fires nearby

All fires in Spain

Frequently asked questions

How long did the Belmonte de Miranda fire last?
Copernicus dates it between 18 February 2020 and 21 February 2020: 4 days between the first and last image with fire. According to EGIF (MITECO), the largest of the 2 recorded fires was detected on 15 February 2020 at 22:10 and declared extinguished on 16 February 2020.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 333 hectares (3.3 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Belmonte de Miranda (314 ha, 1.5 %); Grado (19 ha, 0.1 %).
Did the fire reach a town?
The fire started in Belmonte de Miranda and came within 11.2 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 16.0 °C, humidity dropped to 40 % and gusts hit 28 km/h. The fire danger index (FWI) reached 0, class Very low.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Spain (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 31. Their median duration was 1 day and their median area 144 ha; 0 % went past 1,000 ha. Only 3 of its 31 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 2 of 31, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.7 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
  • Compared with EGIF (MITECO): 367 official ha against 333 ha of perimeter; they agree within 25%.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.