Burned area
satellite only4,899ha
Perimeter published by GWIS (Copernicus).
- Source
- GWIS (Copernicus)
- Date
- 28 Feb 2017 – 2 Mar 2017
+− cross-check
No official record is matched to this page to compare it with.
TD · Chad · –
Barh-Signaka fire, February 2017 Barh-Signaka
Out · last detection 2 Mar 2017, 00:57 UTC
The fire started on 28 February 2017 in Barh-Signaka, Chad, and satellites saw it burning for 3 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,899 hectares from heat detections, spread across a single municipality.
It is the 32th largest in Guéra since 2016 (of 193 with a page). Number 25 in Chad in 2017, of 171.
Use this data
Compare with…
Use this data
Fire page data · version 2026-10-24matches the official recordwith caveatssatellite onlymodel
When copying, the sentence is
Tick the figures you want: they make up the lede and the CSV.
Duration by satellite
satellite only3days
28 Feb 2017 to 2 Mar 2017: first and last day with fire on the page.
- Source
- GWIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- last detection: 2 Mar 2017, 00:57 UTC
+− cross-check
Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.
Start
satellite only28 Feb 2017
First day with fire seen by the satellites or the perimeter.
- Source
- GWIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- 28 Feb 2017
+− cross-check
No official record is matched to this page, so the alert time and the cause are not known here.
Hotspots
satellite only225
VIIRS detections at 375 m. Most intense hotspot: 79 MW.
- Source
- NASA FIRMS · VIIRS (Suomi NPP)
- Date
- 28 Feb 2017 – 2 Mar 2017
+− cross-check
There is no official record to compare with. Each hotspot is a pixel detected in one satellite pass, not a separate fire.
The worst day
satellite only1,696MW
Total radiative power on 28 February 2017; hotspots that day: 108.
- Source
- NASA FIRMS · VIIRS (FRP)
- Date
- 28 Feb 2017
+− cross-check
Fire radiative power (FRP) measures the energy the fire gives off when the satellite passes. Added up by day, it compares intensity, not area.
Danger at the start
model65.5FWI · extreme
Fire Weather Index (Canadian system) computed by WorldFires for the day the fire started. Consecutive days without rain before: 60.
- Source
- WorldFires calculation (Canadian FWI system)
- Date
- 28 Feb 2017, local noon
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings
Weather during the fire
model40.4°C · 2% RH
High of 40.4 °C and minimum humidity of 2% on 1 March 2017; gusts of 43 km/h on 2 March 2017.
- Source
- weather model at the fire’s grid cell
- Date
- 28 Feb 2017 – 2 Mar 2017
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
Living inside
model≈ 350people
Estimated residents inside the perimeter and 0.31 ha of built-up area (100 m grid, epoch 2015).
- Source
- GHSL R2023A · JRC
- Date
- calculated on 24 October 2026
+− cross-check
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
This page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
-
· reconstructed weatherWeather and FWI computed from the ERA5 reanalysis
-
· reconstructed GHSLPopulation and built-up area computed
What was saved on 24 October 2026
Every night a snapshot of what the page shows is saved. If anything changes, it appears in the list as a log entry.
- Area
- 4,899 ha
- Dates
- 28 Feb 2017 – 2 Mar 2017
- Name
- Barh-Signaka
- Official record
- —
Versioned permanent link
https://worldfires.org/en/fire/barh-signaka-2017-02?v=2026-10-24A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
CSV for this fire barh-signaka-2017-02.csv · daily, no individual hotspots
| fecha | focos_viirs | frp_mw | tmax_c | tmin_c | hr_min_pct | viento_max_kmh | racha_max_kmh | precip_mm | fwi | clase_fwi | dentro_del_incendio |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2017-02-28 | 108 | 1,696 | 39.7 | 20 | 2 | 12.3 | 27.7 | 0 | 65.5 | extremo | 1 |
| 2017-03-01 | 89 | 1,530 | 40.4 | 20.1 | 2 | 18.4 | 36.7 | 0 | 86.6 | muy_extremo | 1 |
| 2017-03-02 | 28 | 53 | 38.6 | 23.1 | 5 | 21.1 | 43.2 | 0 | 90.3 | muy_extremo | 1 |
| 2017-03-03 | 0 | 0 | 38 | 22.1 | 6 | 17.4 | 34.9 | 0 | 71.5 | muy_extremo | 0 |
| 2017-03-04 | 0 | 0 | 38.9 | 21.9 | 6 | 14.8 | 29.2 | 0 | 69.9 | extremo | 0 |
| 2017-03-05 | 0 | 0 | 39.6 | 21 | 6 | 13.7 | 27.7 | 0 | 72.9 | muy_extremo | 0 |
| 2017-03-06 | 0 | 0 | 40 | 23.5 | 8 | 12.6 | 24.8 | 0 | 70.1 | muy_extremo | 0 |
| 2017-03-07 | 0 | 0 | 39.7 | 26 | 6 | 19.1 | 39.6 | 0 | 84.4 | muy_extremo | 0 |
| 2017-03-08 | 0 | 0 | 38.9 | 23.1 | 6 | 18.9 | 36 | 0 | 82.7 | muy_extremo | 0 |
| 2017-03-09 | 0 | 0 | 38.7 | 24.9 | 7 | 18.9 | 40.3 | 0 | 83.7 | muy_extremo | 0 |
| 2017-03-10 | 0 | 0 | 36.3 | 22.5 | 8 | 17.6 | 37.8 | 0 | 80.3 | muy_extremo | 0 |
| 2017-03-11 | 0 | 0 | 37.1 | 22.6 | 7 | 15.3 | 31.3 | 0 | 71 | muy_extremo | 0 |
| 2017-03-12 | 0 | 0 | 38.5 | 22.4 | 6 | 16 | 35.3 | 0 | 71.9 | muy_extremo | 0 |
It is generated in your browser from this page’s data: one file per fire, aggregated by day and without individual hotspots.
Live widget for your story
It updates itself while the fire is still active and links to this page. Free, with the attribution shown at the bottom.
Sources for this page: GWIS (Copernicus), NASA FIRMS (VIIRS), ERA5 (ECMWF/Copernicus C3S) · Open-Meteo.com (CC BY 4.0), GHSL (JRC). Open-Meteo.com · How we build fire pages: methodology
- Burnt area
- 4,899ha
- GWIS perimeter (Copernicus)
- Duration
- 3days
- 28 Feb 2017 – 2 Mar 2017
- Municipalities hit
- 1
- departments
- Started on
- 28 Feb
- 2017
- Heat detections
- 225
- in a single hotspot: 79 MW
- Danger at start
- 66
- Extreme · FWI index
- Average daily power
- 1.1GW
- detected power per day, on average
Where it burned
HOTSPOTS BY DAY
28 Feb2 Mar
2 Mar 2017
How it evolved, day by day
28 Feb
1 Mar
2 Mar
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
40°high
43km/h · peak gust
2%lowest humidity
It had gone more than two months without rain (1 mm or more) when it started.
This area had burned before
No earlier perimeters overlap this fire since 2016, when the satellite record begins.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Barh-Signaka where it started4,935 ha reached on 28 Feb0.2 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2015Built-up area0.31 ha
Residents≈ 350
Inside the perimeter there were about 0.31 hectares of built-up land and about 350 residents (GHSL 2015, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
Started with Very dry air: 54 % of the area in Chad 60 days without rain: 44 % of the area in Chad
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 28 Feb | 39.7 °C | 2 % | 28 km/h | 0.0 mm | Extreme 66 |
| 1 Mar | 40.4 °C | 2 % | 37 km/h | 0.0 mm | Very extreme 87 |
| 2 Mar | 38.6 °C | 5 % | 43 km/h | 0.0 mm | Very extreme 90 |
| 3 Mar after | 38.0 °C | 6 % | 35 km/h | 0.0 mm | Very extreme 72 |
| 4 Mar after | 38.9 °C | 6 % | 29 km/h | 0.0 mm | Extreme 70 |
| 5 Mar after | 39.6 °C | 6 % | 28 km/h | 0.0 mm | Very extreme 73 |
| 6 Mar after | 40.0 °C | 8 % | 25 km/h | 0.0 mm | Very extreme 70 |
| 7 Mar after | 39.7 °C | 6 % | 40 km/h | 0.0 mm | Very extreme 84 |
| 8 Mar after | 38.9 °C | 6 % | 36 km/h | 0.0 mm | Very extreme 83 |
| 9 Mar after | 38.7 °C | 7 % | 40 km/h | 0.0 mm | Very extreme 84 |
| 10 Mar after | 36.3 °C | 8 % | 38 km/h | 0.0 mm | Very extreme 80 |
| 11 Mar after | 37.1 °C | 7 % | 31 km/h | 0.0 mm | Very extreme 71 |
| 12 Mar after | 38.5 °C | 6 % | 35 km/h | 0.0 mm | Very extreme 72 |
Its twins: fires that started in the same weather
It started with an FWI of 65.5, a minimum humidity of 2% and more than two months without rain. Fires in the area that started in weather like this since 2016: 19.
FWI at the start
65.5
Minimum humidity
2 %
Days without rain
60+
this fire
chosen twins
rest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Barh-Signaka fire, February 2017
4,899 ha
3 days
FWI 65.5
Min. humidity 2 %
Barh-Signaka fire, March 2022
2,263 ha
4 days
FWI 66.4
Min. humidity 6 %
61 km away, in 2022
First rain (1 mm or more) after it ended: none in the following ten days.
Aboudéia fire, February 2025
2,465 ha
4 days
FWI 64.3
Min. humidity 5 %
151 km away, in 2025
First rain (1 mm or more) after it ended: none in the following ten days.
Aboudéia fire, March 2016
2,135 ha
2 days
FWI 66.8
Min. humidity 6 %
150 km away, in 2016
First rain (1 mm or more) after it ended: none in the following ten days.
Baguirmi fire, January 2024
3,206 ha
4 days
FWI 70.1
Min. humidity 3 %
205 km away, in 2024
First rain (1 mm or more) after it ended: none in the following ten days.
Loug-Chari fire, February 2024
2,061 ha
4 days
FWI 68.3
Min. humidity 6 %
125 km away, in 2024
First rain (1 mm or more) after it ended: none in the following ten days.
What happened to them
- 4 days
- median duration
- 2,465 ha
- median area
- 100 %
- went past 1,000 ha
- —
- rain at the end (median; 0 of 19 had it)
It was 2.0 times larger than the median of its twins and lasted 3 days, against 4 days.
Only 2 of its 19 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In none of them did 1 mm fall in the ten days after the end: they all went out without rain.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
—first rain
—no rain in ten days
43km/h · max. gust
It was considered over on 2 Mar, and not even 1 mm fell in the following ten days: it went out without rain. None of its 19 twins had rain when they ended.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
- Same area: fires that have already ended, less than 250 km from this one, since 2016.
- Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
- Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
- Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
- They are sorted by similarity, and the outlines of the first five are drawn.
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
↔
Before · 21 Feb 2017
After · 9 Mar 2017
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 225Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV
Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Barh-Signaka fire last?
- GWIS (Copernicus) dates it between 28 February 2017 and 2 March 2017: 3 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,899 hectares (49.0 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Barh-Signaka (4,935 ha, 0.2 %).
- What was the weather like?
- During the fire the temperature reached 40.4 °C, humidity dropped to 2 % and gusts hit 43 km/h. The fire danger index (FWI) reached 90, class Very extreme.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Chad (geoBoundaries). It is not an official report.
- How did the fires that started in similar weather in this area end?
- Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 19. Their median duration was 4 days and their median area 2,465 ha; 100 % went past 1,000 ha. Only 2 of its 19 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In none of them did 1 mm fall in the ten days after the end: they all went out without rain.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
RSS Changes to this page With cross-checks and a citable version
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 225 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.