Skip to content
worldfires
ID · Indonesia · –

Banggai fire, 4 September 2026 Banggai

Out · last detection 14 Oct 2026, 17:20 UTC

The fire started on 4 September 2026 in Banggai, Indonesia, and satellites saw it burning for 41 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 11,015 hectares from heat detections, spread across a single municipality.

Number 59 in Indonesia in 2026, of 992.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
11,015ha
GWIS perimeter (Copernicus)
Duration
41days
4 Sept 2026 – 14 Oct 2026
Municipalities hit
1
regencies
Started on
4 Sept
2026
Heat detections
483
in a single hotspot: 87 MW
Danger at start
23
High · FWI index
Average daily power
59MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 4 Sept14 Oct
14 Oct 2026

How it evolved, day by day

4 Sept 2026 · 7 MW · 2 5 Sept 2026 · 1 MW · 1 6 Sept 2026 · 1 MW · 1 7 Sept 2026 · 14 MW · 1 8 Sept 2026 · 5 MW · 1 10 Sept 2026 · 73 MW · 11 11 Sept 2026 · 21 MW · 11 12 Sept 2026 · 4 MW · 2 13 Sept 2026 · 154 MW · 29 14 Sept 2026 · 131 MW · 31 15 Sept 2026 · 586 MW · 62 16 Sept 2026 · 235 MW · 61 17 Sept 2026 · 74 MW · 9 18 Sept 2026 · 48 MW · 9 19 Sept 2026 · 19 MW · 4 20 Sept 2026 · 24 MW · 13 21 Sept 2026 · 39 MW · 23 22 Sept 2026 · 20 MW · 9 24 Sept 2026 · 83 MW · 3 25 Sept 2026 · 10 MW · 1 26 Sept 2026 · 13 MW · 7 27 Sept 2026 · 49 MW · 8 28 Sept 2026 · 22 MW · 4 29 Sept 2026 · 50 MW · 11 30 Sept 2026 · 64 MW · 18 1 Oct 2026 · 45 MW · 22 2 Oct 2026 · 97 MW · 31 3 Oct 2026 · 22 MW · 12 4 Oct 2026 · 14 MW · 1 5 Oct 2026 · 96 MW · 23 6 Oct 2026 · 73 MW · 43 7 Oct 2026 · 17 MW · 3 8 Oct 2026 · 8 MW · 4 9 Oct 2026 · 30 MW · 4 10 Oct 2026 · 8 MW · 2 11 Oct 2026 · 0 MW · 0 12 Oct 2026 · 0 MW · 0 13 Oct 2026 · 7 MW · 5 14 Oct 2026 · 1 MW · 1
4 Sept 15 Sept 21 Sept 30 Sept 8 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (93 passes) and with what wind. Watch the film

The weather it burned in

35°high
48km/h · peak gust
20%lowest humidity

It had gone 43 days without rain (1 mm or more) when it started. Rain came after the fire: 1.8 mm on 18 Oct.

This area had burned before

7% of the perimeter overlaps earlier fires recorded since 2016: 849 ha in 2019, 6 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 804 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 7% of the area of London (110 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Banggai where it started
    11,154 ha reached on 4 Sept
    1.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.12 ha
Residents< 20

Inside the perimeter there were about 0.12 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
4 Sept 32.6 °C 42 % 32 km/h 0.2 mm High 23
5 Sept 32.4 °C 40 % 29 km/h 0.0 mm High 24
6 Sept 32.1 °C 44 % 28 km/h 0.1 mm High 24
7 Sept 33.5 °C 32 % 24 km/h 0.0 mm High 28
8 Sept 33.0 °C 39 % 26 km/h 0.0 mm High 27
9 Sept 34.6 °C 20 % 35 km/h 0.0 mm High 32
10 Sept 34.3 °C 25 % 31 km/h 0.0 mm High 35
11 Sept 33.9 °C 27 % 32 km/h 0.0 mm High 30
12 Sept 33.7 °C 34 % 31 km/h 0.1 mm High 31
13 Sept 32.6 °C 34 % 36 km/h 0.0 mm High 37
14 Sept 34.0 °C 22 % 39 km/h 0.0 mm High 34
15 Sept 32.1 °C 34 % 45 km/h 0.0 mm High 37
16 Sept 32.8 °C 32 % 42 km/h 0.0 mm High 36
17 Sept 32.4 °C 38 % 34 km/h 0.0 mm High 34
18 Sept 34.1 °C 31 % 35 km/h 0.0 mm High 27
19 Sept 33.4 °C 34 % 30 km/h 0.0 mm High 29
20 Sept 33.2 °C 37 % 27 km/h 0.0 mm High 30
21 Sept 32.3 °C 41 % 27 km/h 0.1 mm High 28
22 Sept 32.5 °C 37 % 29 km/h 0.2 mm High 27
23 Sept 31.8 °C 48 % 36 km/h 0.0 mm High 31
24 Sept 31.0 °C 54 % 26 km/h 1.0 mm High 28
25 Sept 32.7 °C 39 % 28 km/h 0.6 mm Moderate 21
26 Sept 31.8 °C 47 % 26 km/h 0.2 mm Moderate 21
27 Sept 32.8 °C 40 % 32 km/h 0.2 mm Moderate 21
28 Sept 33.5 °C 33 % 24 km/h 0.0 mm High 30
29 Sept 32.4 °C 36 % 37 km/h 0.0 mm High 35
30 Sept 32.7 °C 30 % 21 km/h 0.0 mm High 31
1 Oct 33.5 °C 34 % 32 km/h 0.0 mm High 31
2 Oct 32.0 °C 44 % 39 km/h 0.0 mm High 36
3 Oct 33.5 °C 38 % 28 km/h 0.0 mm High 27
4 Oct 33.1 °C 43 % 36 km/h 0.1 mm High 31
5 Oct 32.1 °C 43 % 28 km/h 0.0 mm High 31
6 Oct 34.4 °C 25 % 27 km/h 0.0 mm High 36
7 Oct 32.5 °C 40 % 41 km/h 0.0 mm Very high 40
8 Oct 30.8 °C 50 % 38 km/h 0.1 mm High 35
9 Oct 32.4 °C 42 % 48 km/h 0.1 mm High 36
10 Oct 32.1 °C 48 % 31 km/h 0.0 mm High 29
11 Oct 31.8 °C 50 % 19 km/h 0.0 mm High 25
12 Oct 33.3 °C 34 % 22 km/h 0.0 mm High 27
13 Oct 33.1 °C 37 % 32 km/h 0.0 mm High 27
14 Oct 33.1 °C 38 % 42 km/h 0.0 mm High 33
15 Oct after 32.7 °C 42 % 21 km/h 0.1 mm High 26
16 Oct after 33.9 °C 31 % 30 km/h 0.0 mm High 30
17 Oct after 32.4 °C 47 % 42 km/h 0.0 mm High 32
18 Oct after 32.3 °C 52 % 29 km/h 1.8 mm High 31

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 28 Aug 2026
After · 21 Oct 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 2 October 2026 the air beside the fire reached 51 µg/m³ of PM2.5. That day averaged 35: 2.3 times the WHO daily guideline (15).

PM2.5 peak51 µg/m³
Days over the guideline16 days
PM1055 µg/m³
Optical depth0.89
8 Sept13 Sept18 Sept23 Sept28 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 483Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Indonesia

Frequently asked questions

How long did the Banggai fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 4 September 2026 to 14 October 2026 (41 days). The perimeter dates it from 10 September 2026 to 14 October 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 11,015 hectares (110.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Banggai (11,154 ha, 1.3 %).
What was the weather like?
During the fire the temperature reached 34.6 °C, humidity dropped to 20 % and gusts hit 48 km/h. The fire danger index (FWI) reached 40, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Indonesia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 21 October 2026 → 14 October 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 10 September 2026 to 14 October 2026. 483 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.