Skip to content
worldfires
GN · Guinea · –

Balizia fire, February 2020 Balizia, Bofossou, Daro

Out · last detection 14 Mar 2020, 14:09 UTC

The fire started on 18 February 2020 in Balizia, Guinea, and satellites saw it burning for 25 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,818 hectares from heat detections, spread across 3 municipalities.

It is the 2th largest in Nzérékoré since 2016 (of 200 with a page). Number 6 in Guinea in 2020, of 120.

Burnt area
8,818ha
GWIS perimeter (Copernicus)
Duration
25days
18 Feb 2020 – 13 Mar 2020
Municipalities hit
3
sub-prefectures
Started on
18 Feb
2020
Heat detections
439
in a single hotspot: 142 MW
Danger at start
33
High · FWI index
Average daily power
384MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 18 Feb13 Mar
14 Mar 2020

How it evolved, day by day

18 Feb 2020 · 59 MW · 3 19 Feb 2020 · 4 MW · 1 20 Feb 2020 · 23 MW · 4 21 Feb 2020 · 268 MW · 17 23 Feb 2020 · 16 MW · 3 25 Feb 2020 · 24 MW · 3 26 Feb 2020 · 381 MW · 33 27 Feb 2020 · 537 MW · 34 28 Feb 2020 · 505 MW · 30 29 Feb 2020 · 811 MW · 33 1 Mar 2020 · 1,800 MW · 44 2 Mar 2020 · 124 MW · 19 3 Mar 2020 · 666 MW · 41 4 Mar 2020 · 828 MW · 55 5 Mar 2020 · 967 MW · 37 6 Mar 2020 · 67 MW · 6 7 Mar 2020 · 52 MW · 7 8 Mar 2020 · 351 MW · 10 9 Mar 2020 · 99 MW · 13 12 Mar 2020 · 48 MW · 6 13 Mar 2020 · 233 MW · 19 14 Mar 2020 · 576 MW · 21
18 Feb 25 Feb 1 Mar 6 Mar 13 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
33km/h · peak gust
20%lowest humidity

It had gone 26 days without rain (1 mm or more) when it started. Rain came after the fire: 4.7 mm on 18 Mar.

This area had burned before

48% of the perimeter overlaps earlier fires recorded since 2016: 1,095 ha in 2016, 3,655 ha in 2017, 361 ha in 2018, 266 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 4,212 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 5.6% of the area of London (88 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Balizia where it started
    6,506 ha reached on 18 Feb
    16 %
  2. 1,656 ha reached on 26 Feb
    5.9 %
  3. 837 ha reached on 18 Feb
    2.9 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area4.5 ha
Residents≈ 900

Inside the perimeter there were about 4.5 hectares of built-up land and about 900 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
18 Feb 34.7 °C 31 % 27 km/h 0.0 mm High 33
19 Feb 34.8 °C 31 % 25 km/h 0.0 mm High 27
20 Feb 34.4 °C 40 % 28 km/h 0.6 mm High 25
21 Feb 33.5 °C 49 % 32 km/h 17.8 mm Moderate 17
22 Feb 32.2 °C 58 % 29 km/h 0.6 mm Very low 1
23 Feb 34.1 °C 41 % 26 km/h 0.0 mm Low 6
24 Feb 34.3 °C 40 % 24 km/h 0.7 mm Moderate 16
25 Feb 37.1 °C 20 % 20 km/h 0.0 mm High 25
26 Feb 37.3 °C 21 % 22 km/h 0.0 mm High 28
27 Feb 34.6 °C 34 % 24 km/h 0.0 mm High 22
28 Feb 36.0 °C 32 % 26 km/h 0.0 mm High 24
29 Feb 36.0 °C 27 % 22 km/h 0.0 mm High 25
1 Mar 36.2 °C 27 % 25 km/h 0.0 mm High 24
2 Mar 36.4 °C 29 % 21 km/h 0.0 mm High 26
3 Mar 34.9 °C 41 % 33 km/h 1.4 mm Moderate 20
4 Mar 35.0 °C 41 % 28 km/h 0.7 mm Low 8
5 Mar 36.6 °C 30 % 23 km/h 0.0 mm Moderate 17
6 Mar 34.9 °C 32 % 28 km/h 1.1 mm Moderate 16
7 Mar 34.3 °C 33 % 29 km/h 0.0 mm Moderate 21
8 Mar 34.9 °C 42 % 26 km/h 1.6 mm High 22
9 Mar 34.6 °C 47 % 29 km/h 11.3 mm Low 10
10 Mar 28.2 °C 65 % 24 km/h 0.5 mm Very low 0
11 Mar 32.0 °C 52 % 30 km/h 9.3 mm Very low 3
12 Mar 35.1 °C 27 % 26 km/h 0.0 mm Very low 1
13 Mar 35.1 °C 35 % 25 km/h 0.0 mm Low 6
14 Mar after 35.2 °C 36 % 24 km/h 0.0 mm Moderate 14
15 Mar after 32.7 °C 38 % 30 km/h 0.0 mm Moderate 17
16 Mar after 34.2 °C 33 % 27 km/h 0.0 mm Moderate 16
17 Mar after 34.0 °C 46 % 30 km/h 0.3 mm Moderate 17
18 Mar after 33.3 °C 48 % 29 km/h 4.7 mm Moderate 15

Its twins: fires that started in the same weather

It started with an FWI of 33.3, a minimum humidity of 31% and 26 days without rain. Fires in the area that started in weather like this since 2016: 35.

FWI at the start 33.3
Minimum humidity 31 %
Days without rain 26
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Gueasso fire, January 2018
2,118 ha 15 days FWI 34.3 Min. humidity 30 % 179 km away, in 2018

First rain (1 mm or more) after it ended: 2.3 mm on 28 Jan.

What happened to them

11 days
median duration
2,439 ha
median area
100 %
went past 1,000 ha
4.2 mm
rain at the end (median; 13 of 35 had it)

It was 3.6 times larger than the median of its twins and lasted 25 days, against 11 days.

Only 1 of its 35 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 22 of 35, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

4.7 mmfirst rain
18 Mar5 days after it ended
33km/h · max. gust

It was considered over on 13 Mar, and on 18 Mar 4.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 13 of 35, with a median of 4.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 11 Feb 2020
After · 20 Mar 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 439Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Guinea

Frequently asked questions

How long did the Balizia fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 18 February 2020 to 13 March 2020 (25 days). The perimeter dates it from 25 February 2020 to 6 March 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,818 hectares (88.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Balizia (6,506 ha, 16 %); Bofossou (1,656 ha, 5.9 %); Daro (837 ha, 2.9 %).
What was the weather like?
During the fire the temperature reached 37.3 °C, humidity dropped to 20 % and gusts hit 33 km/h. The fire danger index (FWI) reached 33, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Guinea (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 35. Their median duration was 11 days and their median area 2,439 ha; 100 % went past 1,000 ha. Only 1 of its 35 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 22 of 35, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 6 March 2020 → 13 March 2020.
  2. Start date: 25 February 2020 → 18 February 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 25 February 2020 to 6 March 2020. 439 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.