Skip to content
worldfires
PY · Paraguay · –

Bahía Negra fire, 27 September 2017 Bahía Negra

Out · last detection

The fire started on in Bahía Negra, Paraguay, and satellites saw it burning for 15 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,848 hectares from heat detections, spread across a single municipality.

It is number 27 by size of the 383 fires with a page that started in ALTO PARAGUAY since 2016. Number 7 in Paraguay in 2017, of 261.

Burnt area
6,848ha
GWIS perimeter (Copernicus)
Duration
15days
27 Sept 2017 – 11 Oct 2017
Municipalities hit
1
districts
Started on
27 Sept
2017
Heat detections
460
in a single hotspot: 2,139 MW
Danger at start
36
High · FWI index
Average daily power
2.7GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 27 Sept11 Oct
11 Oct 2017

How it evolved, day by day

27 Sept 2017 · 18,370 MW · 120 30 Sept 2017 · 12 MW · 9 1 Oct 2017 · 1,449 MW · 34 4 Oct 2017 · 810 MW · 58 5 Oct 2017 · 2,398 MW · 108 6 Oct 2017 · 908 MW · 84 7 Oct 2017 · 134 MW · 43 10 Oct 2017 · 14 MW · 2 11 Oct 2017 · 14 MW · 2
27 Sept 1 Oct 5 Oct 7 Oct 11 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
68km/h · peak gust
29%lowest humidity

It had gone 11 days without rain (1 mm or more) when it started. Rain came after the fire: 1.3 mm on 20 Oct.

This area had burned before

11% of the perimeter overlaps earlier fires recorded since 2016: 753 ha in 2016.

How big is it?

10 km
It burned the equivalent of 4.3% of the area of London (68 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Bahía Negra where it started
    6,879 ha reached on 27 Sept
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
27 Sept 38.3 °C 29 % 31 km/h 0.5 mm High 36
28 Sept 27.7 °C 60 % 30 km/h 3.0 mm Moderate 15
29 Sept 29.2 °C 62 % 27 km/h 13.5 mm Very low 3
30 Sept 33.1 °C 47 % 28 km/h 0.5 mm Very low 1
1 Oct 39.3 °C 33 % 68 km/h 30.0 mm Very high 42
2 Oct 24.8 °C 46 % 41 km/h 54.4 mm Very low 1
3 Oct 28.1 °C 39 % 36 km/h 0.0 mm Low 11
4 Oct 31.5 °C 36 % 31 km/h 0.0 mm Moderate 16
5 Oct 36.5 °C 36 % 54 km/h 0.0 mm High 28
6 Oct 39.2 °C 30 % 59 km/h 0.0 mm High 32
7 Oct 37.9 °C 44 % 33 km/h 0.0 mm Moderate 15
8 Oct 37.0 °C 40 % 40 km/h 0.1 mm High 22
9 Oct 38.3 °C 29 % 47 km/h 0.0 mm High 31
10 Oct 40.0 °C 30 % 40 km/h 0.0 mm High 31
11 Oct 39.9 °C 32 % 49 km/h 0.2 mm High 35
12 Oct after 37.9 °C 38 % 39 km/h 0.0 mm High 25
13 Oct after 30.3 °C 62 % 45 km/h 0.0 mm High 22
14 Oct after 23.6 °C 59 % 41 km/h 0.0 mm Moderate 20
15 Oct after 32.5 °C 46 % 31 km/h 0.0 mm Moderate 15
16 Oct after 37.9 °C 38 % 32 km/h 0.0 mm High 25
17 Oct after 39.8 °C 32 % 41 km/h 0.0 mm High 31
18 Oct after 39.6 °C 28 % 54 km/h 0.0 mm Very high 44
19 Oct after 40.5 °C 25 % 53 km/h 0.3 mm Very high 42
20 Oct after 33.2 °C 42 % 42 km/h 1.3 mm High 30

Its twins: fires that started in the same weather

It started with an FWI of 36.1, a minimum humidity of 29% and 11 days without rain. Fires in the area that started in weather like this since 2016: 18.

FWI at the start 36.1
Minimum humidity 29 %
Days without rain 11
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Fuerte Olimpo fire, September 2019
1,824 ha 4 days FWI 36.0 Min. humidity 29 % 47 km away, in 2019

First rain (1 mm or more) after it ended: 2.1 mm on 2 Oct.

What happened to them

8 days
median duration
3,290 ha
median area
33 %
went past 10,000 ha
3.8 mm
rain at the end (median; 14 of 18 had it)

It was 2.1 times larger than the median of its twins and lasted 15 days, against 8 days.

Only 6 of its 18 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 4 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.3 mmfirst rain
20 Oct9 days after it ended
68km/h · max. gust

It was considered over on 11 Oct, and on 20 Oct 1.3 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 14 of 18, with a median of 3.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 20 Sept 2017
After · 18 Oct 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 460Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Paraguay

Frequently asked questions

How long did the Bahía Negra fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 27 September 2017 to 11 October 2017 (15 days). The perimeter dates it from 27 September 2017 to 7 October 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,848 hectares (68.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Bahía Negra (6,879 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 40.0 °C, humidity dropped to 29 % and gusts hit 68 km/h. The fire danger index (FWI) reached 42, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Paraguay (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 18. Their median duration was 8 days and their median area 3,290 ha; 33 % went past 10,000 ha. Only 6 of its 18 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 4 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 132 · 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 7 October 2017 → 11 October 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 132 · 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 27 September 2017 to 7 October 2017. 460 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.