Skip to content
worldfires
KZ · Kazakhstan · –

Aytekebiyskiy fire, August 2025 Әйтеке би ауданы · Aytekebiyskiy

Out · last detection 1 Sept 2025, 08:36 UTC

The fire started on 30 August 2025 in Aytekebiyskiy, Kazakhstan, and satellites saw it burning for 3 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,493 hectares from heat detections, spread across a single municipality.

It is the 74th largest in Aktobe Region since 2016 (of 99 with a page). Number 4 in Kazakhstan in 2025, of 5.

Burnt area
3,493ha
GWIS perimeter (Copernicus)
Duration
3days
30 Aug 2025 – 1 Sept 2025
Municipalities hit
1
districts
Started on
30 Aug
2025
Heat detections
130
in a single hotspot: 107 MW
Danger at start
56
Extreme · FWI index
Average daily power
999MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 30 Aug1 Sept
1 Sept 2025

How it evolved, day by day

30 Aug 2025 · 2,876 MW · 115 31 Aug 2025 · 91 MW · 7 1 Sept 2025 · 30 MW · 8
30 Aug 31 Aug 1 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

28°high
56km/h · peak gust
21%lowest humidity

It had gone 13 days without rain (1 mm or more) when it started. Rain came after the fire: 1.8 mm on 6 Sept.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 2.2% of the area of London (35 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Aytekebiyskiy Әйтеке би ауданы where it started
    3,542 ha reached on 30 Aug
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 45 % of the area in Kazakhstan Strong wind: 19 % of the area in Kazakhstan

Day High Min. humidity Peak gust Rain Danger (FWI)
30 Aug 22.6 °C 21 % 56 km/h 0.0 mm Extreme 56
31 Aug 27.8 °C 28 % 51 km/h 0.0 mm Very high 39
1 Sept 24.2 °C 42 % 34 km/h 0.0 mm High 26
2 Sept after 24.6 °C 29 % 31 km/h 0.0 mm High 27
3 Sept after 31.9 °C 20 % 53 km/h 0.0 mm Extreme 59
4 Sept after 30.2 °C 16 % 41 km/h 0.0 mm Very high 49
5 Sept after 28.1 °C 16 % 53 km/h 0.0 mm Extreme 70
6 Sept after 25.7 °C 29 % 37 km/h 1.8 mm High 32

Its twins: fires that started in the same weather

It started with an FWI of 55.7, a minimum humidity of 21% and 13 days without rain. Fires in the area that started in weather like this since 2016: 18.

FWI at the start 55.7
Minimum humidity 21 %
Days without rain 13
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Aytekebiyskiy fire, July 2020
4,837 ha 4 days FWI 54.3 Min. humidity 19 % 25 km away, in 2020

First rain (1 mm or more) after it ended: 3.2 mm on 22 Jul.

What happened to them

3 days
median duration
4,653 ha
median area
11 %
went past 10,000 ha
3.4 mm
rain at the end (median; 13 of 18 had it)

It burned an area similar to its twins (3,493 ha against a median of 4,653 ha) and lasted 3 days, against 3 days.

In 5 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.8 mmfirst rain
6 Sept5 days after it ended
56km/h · max. gust

It was considered over on 1 Sept, and on 6 Sept 1.8 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 13 of 18, with a median of 3.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 23 Aug 2025
After · 8 Sept 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 2 September 2025 the air beside the fire reached 30 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak30 µg/m³
Days over the guideline0 days
PM1048 µg/m³
Optical depth0.50
28 Aug30 Aug1 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 130Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Kazakhstan

Frequently asked questions

How long did the Aytekebiyskiy fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 30 August 2025 to 1 September 2025 (3 days). The perimeter dates it from 30 August 2025 to 30 August 2025.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,493 hectares (34.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Aytekebiyskiy (3,542 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 27.8 °C, humidity dropped to 21 % and gusts hit 56 km/h. The fire danger index (FWI) reached 56, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Kazakhstan (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 18. Their median duration was 3 days and their median area 4,653 ha; 11 % went past 10,000 ha. In 5 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 30 August 2025 → 1 September 2025.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 30 August 2025 to 30 August 2025. 130 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.