Skip to content
worldfires
AU · Australia · →

Aurukun fire, 6 September 2026 Aurukun

Out · last detection 15 Oct 2026, 16:05 UTC

The fire started on 6 September 2026 in Aurukun, Australia, and satellites saw it burning for 40 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 14,355 hectares from heat detections, spread across a single municipality.

It is the 491th largest in Queensland since 2016 (of 1737 with a page). Number 210 in Australia in 2026, of 876.

Compare with…
Burnt area
14,355ha
GWIS perimeter (Copernicus)
Duration
40days
6 Sept 2026 – 15 Oct 2026
Municipalities hit
1
local government areas
Started on
6 Sept
2026
Heat detections
575
in a single hotspot: 49 MW
Danger at start
39
Very high · FWI index
Average daily power
69MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 6 Sept15 Oct
15 Oct 2026

How it evolved, day by day

7 Sept 2026 · 74 MW · 16 8 Sept 2026 · 1 MW · 3 9 Sept 2026 · 51 MW · 10 10 Sept 2026 · 34 MW · 10 11 Sept 2026 · 18 MW · 7 12 Sept 2026 · 35 MW · 9 13 Sept 2026 · 15 MW · 5 14 Sept 2026 · 128 MW · 26 15 Sept 2026 · 160 MW · 45 16 Sept 2026 · 54 MW · 14 17 Sept 2026 · 305 MW · 46 18 Sept 2026 · 204 MW · 27 19 Sept 2026 · 60 MW · 14 20 Sept 2026 · 80 MW · 21 21 Sept 2026 · 57 MW · 14 22 Sept 2026 · 42 MW · 8 23 Sept 2026 · 5 MW · 3 24 Sept 2026 · 49 MW · 8 25 Sept 2026 · 8 MW · 1 27 Sept 2026 · 9 MW · 3 28 Sept 2026 · 5 MW · 1 29 Sept 2026 · 14 MW · 2 30 Sept 2026 · 9 MW · 5 1 Oct 2026 · 9 MW · 15 2 Oct 2026 · 45 MW · 11 3 Oct 2026 · 2 MW · 3 4 Oct 2026 · 100 MW · 14 5 Oct 2026 · 154 MW · 37 6 Oct 2026 · 170 MW · 55 7 Oct 2026 · 182 MW · 74 8 Oct 2026 · 180 MW · 18 9 Oct 2026 · 40 MW · 8 10 Oct 2026 · 195 MW · 17 11 Oct 2026 · 72 MW · 13 12 Oct 2026 · 21 MW · 7 13 Oct 2026 · 3 MW · 2 14 Oct 2026 · 14 MW · 2 15 Oct 2026 · 5 MW · 1
7 Sept 13 Sept 17 Sept 19 Sept 25 Sept 2 Oct 8 Oct 14 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
57km/h · peak gust
18%lowest humidity

It had gone 59 days without rain (1 mm or more) when it started.

This area had burned before

55% of the perimeter overlaps earlier fires recorded since 2016: 3,160 ha in 2016, 4,316 ha in 2017, 6,268 ha in 2018, 5,610 ha in 2019, 1,498 ha in 2020, 4,018 ha in 2021, 4,502 ha in 2022, 5,099 ha in 2023, 3,057 ha in 2024, 3,276 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 7,878 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 9.1% of the area of London (144 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Aurukun where it started
    14,415 ha reached on 7 Sept
    1.9 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
6 Sept 33.3 °C 32 % 32 km/h 0.0 mm Very high 39
7 Sept 34.0 °C 29 % 34 km/h 0.0 mm Very high 40
8 Sept 33.8 °C 36 % 41 km/h 0.0 mm Very high 44
9 Sept 33.5 °C 35 % 40 km/h 0.0 mm Very high 43
10 Sept 32.5 °C 37 % 49 km/h 0.0 mm Very high 46
11 Sept 31.3 °C 35 % 55 km/h 0.0 mm Very high 49
12 Sept 31.6 °C 37 % 50 km/h 0.0 mm Very high 45
13 Sept 32.7 °C 35 % 40 km/h 0.0 mm Very high 40
14 Sept 33.4 °C 30 % 43 km/h 0.0 mm Very high 42
15 Sept 33.5 °C 31 % 41 km/h 0.0 mm Very high 41
16 Sept 33.6 °C 28 % 36 km/h 0.0 mm Very high 40
17 Sept 34.3 °C 18 % 43 km/h 0.0 mm Extreme 53
18 Sept 32.5 °C 32 % 57 km/h 0.0 mm Extreme 54
19 Sept 31.8 °C 33 % 50 km/h 0.0 mm Very high 48
20 Sept 32.9 °C 32 % 41 km/h 0.0 mm Very high 44
21 Sept 33.0 °C 32 % 36 km/h 0.0 mm Very high 42
22 Sept 32.8 °C 33 % 39 km/h 0.0 mm Very high 44
23 Sept 32.8 °C 32 % 37 km/h 0.0 mm Very high 43
24 Sept 33.0 °C 34 % 39 km/h 0.0 mm Very high 42
25 Sept 32.8 °C 33 % 41 km/h 0.0 mm Very high 44
26 Sept 33.0 °C 35 % 48 km/h 0.0 mm Very high 47
27 Sept 33.7 °C 33 % 40 km/h 0.0 mm Very high 43
28 Sept 34.0 °C 33 % 43 km/h 0.0 mm Very high 44
29 Sept 32.5 °C 40 % 51 km/h 0.0 mm Very high 44
30 Sept 32.5 °C 39 % 45 km/h 0.0 mm Very high 41
1 Oct 34.2 °C 31 % 46 km/h 0.0 mm Very high 42
2 Oct 33.5 °C 31 % 40 km/h 0.0 mm Very high 40
3 Oct 32.8 °C 35 % 42 km/h 0.0 mm Very high 40
4 Oct 33.8 °C 33 % 37 km/h 0.0 mm Very high 39
5 Oct 34.8 °C 27 % 33 km/h 0.0 mm Very high 39

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 30 Aug 2026
After · 22 Oct 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 21 September 2026 the air beside the fire reached 24 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak24 µg/m³
Days over the guideline0 days
PM1030 µg/m³
Optical depth0.48
4567891011121314151617181920212223242526272829301234
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 575Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia ›

Frequently asked questions

How long did the Aurukun fire last?
GWIS (Copernicus) dates it between 6 September 2026 and 15 October 2026: 40 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 14,355 hectares (143.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Aurukun (14,415 ha, 1.9 %).
Is the Aurukun fire still active?
No fire detections since 15 Oct 2026, 16:05 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 34.3 °C, humidity dropped to 18 % and gusts hit 57 km/h. The fire danger index (FWI) reached 54, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings ›

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 575 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.