Skip to content
worldfires
AU · Australia · –

Aurukun fire, 15 July 2026 Cook, Aurukun, Napranum

Out · last detection 4 Aug 2026, 16:09 UTC

The fire started on 15 July 2026 in Aurukun, Australia, and satellites saw it burning for 21 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 12,724 hectares from heat detections, spread across 3 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
12,724ha
GWIS perimeter (Copernicus)
Duration
21days
15 Jul 2026 – 4 Aug 2026
Municipalities hit
3
local government areas
Started on
15 Jul
2026
Heat detections
414
in a single hotspot: 44 MW
Danger at start
41
Very high · FWI index
Average daily power
146MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 15 Jul4 Aug
4 Aug 2026

How it evolved, day by day

15 Jul 2026 · 40 MW · 8 16 Jul 2026 · 223 MW · 42 17 Jul 2026 · 79 MW · 21 18 Jul 2026 · 48 MW · 20 19 Jul 2026 · 456 MW · 63 20 Jul 2026 · 581 MW · 67 21 Jul 2026 · 156 MW · 17 23 Jul 2026 · 296 MW · 52 24 Jul 2026 · 31 MW · 24 25 Jul 2026 · 83 MW · 21 26 Jul 2026 · 174 MW · 22 27 Jul 2026 · 374 MW · 43 28 Jul 2026 · 24 MW · 4 29 Jul 2026 · 7 MW · 1 30 Jul 2026 · 31 MW · 4 31 Jul 2026 · 18 MW · 1 3 Aug 2026 · 10 MW · 3 4 Aug 2026 · 1 MW · 1
15 Jul 20 Jul 24 Jul 28 Jul 3 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (31 passes) and with what wind. Watch the film

The weather it burned in

32°high
53km/h · peak gust
28%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

99% of the perimeter overlaps earlier fires recorded since 2016: 3,811 ha in 2016, 1,636 ha in 2017, 4,849 ha in 2018, 7,283 ha in 2019, 4,772 ha in 2020, 3,370 ha in 2021, 6,815 ha in 2022, 3,474 ha in 2023, 2,128 ha in 2024, 6,498 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 12,565 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 8% of the area of London (127 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 9,184 ha
    0.1 %
  2. Aurukun where it started
    2,984 ha
    0.4 %
  3. 592 ha
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
15 Jul 30.3 °C 43 % 45 km/h 0.0 mm Very high 41
16 Jul 30.0 °C 38 % 43 km/h 0.0 mm Very high 39
17 Jul 29.7 °C 28 % 38 km/h 0.0 mm Very high 39
18 Jul 29.2 °C 40 % 40 km/h 0.0 mm High 38
19 Jul 30.0 °C 35 % 41 km/h 0.0 mm High 37
20 Jul 29.8 °C 29 % 37 km/h 0.0 mm Very high 39
21 Jul 30.1 °C 38 % 39 km/h 0.0 mm Very high 47
22 Jul 29.6 °C 47 % 35 km/h 0.0 mm High 36
23 Jul 31.0 °C 40 % 36 km/h 0.0 mm Very high 38
24 Jul 30.4 °C 39 % 38 km/h 0.0 mm Very high 38
25 Jul 30.0 °C 33 % 37 km/h 0.0 mm Very high 42
26 Jul 30.7 °C 32 % 35 km/h 0.1 mm High 37
27 Jul 30.6 °C 40 % 30 km/h 0.2 mm High 28
28 Jul 30.2 °C 46 % 32 km/h 0.3 mm High 32
29 Jul 28.8 °C 52 % 41 km/h 0.7 mm High 38
30 Jul 31.5 °C 40 % 42 km/h 0.0 mm High 34
31 Jul 31.0 °C 32 % 42 km/h 0.0 mm Very high 42
1 Aug 29.7 °C 45 % 43 km/h 0.0 mm Very high 42
2 Aug 28.6 °C 53 % 53 km/h 0.1 mm Extreme 51
3 Aug 30.2 °C 38 % 48 km/h 0.0 mm Very high 42
4 Aug 29.1 °C 42 % 45 km/h 0.0 mm Very high 41
5 Aug after 29.2 °C 44 % 42 km/h 0.0 mm Very high 41
6 Aug after 30.3 °C 38 % 42 km/h 0.0 mm Very high 39
7 Aug after 30.9 °C 36 % 31 km/h 0.0 mm High 31
8 Aug after 31.4 °C 41 % 38 km/h 0.0 mm High 35
9 Aug after 31.2 °C 44 % 28 km/h 0.0 mm High 26
10 Aug after 32.1 °C 43 % 24 km/h 0.0 mm High 24
11 Aug after 32.0 °C 43 % 21 km/h 0.0 mm High 25
12 Aug after 32.0 °C 41 % 26 km/h 0.0 mm High 27
13 Aug after 32.8 °C 38 % 29 km/h 0.0 mm High 28
14 Aug after 32.1 °C 38 % 41 km/h 0.0 mm Very high 39

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 8 Jul 2026
After · 11 Aug 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 22 July 2026 the air beside the fire reached 56 µg/m³ of PM2.5. That day averaged 21: 1.4 times the WHO daily guideline (15).

PM2.5 peak56 µg/m³
Days over the guideline5 days
PM1057 µg/m³
Optical depth0.57
15 Jul21 Jul27 Jul2 Aug8 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 414Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Aurukun fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 15 July 2026 to 4 August 2026 (21 days). The perimeter dates it from 18 July 2026 to 3 August 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 12,724 hectares (127.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Cook (9,184 ha, 0.1 %); Aurukun (2,984 ha, 0.4 %); Napranum (592 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 31.5 °C, humidity dropped to 28 % and gusts hit 53 km/h. The fire danger index (FWI) reached 51, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 4 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Name: Cook → Aurukun.
  2. Start date: 17 July 2026 → 15 July 2026.
  3. Last day with fire: 3 August 2026 → 4 August 2026.
  4. Start date: 18 July 2026 → 17 July 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 18 July 2026 to 3 August 2026. 414 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.